for Sonstige-Citroen Alle

Bitumen mats (anti-roar plates) self adhesive, 6 plates. 550 x 250mm. Universal fitting.

Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.

Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.

Lead substitute (fuel additive) for older petrol engines, replaces the lubricating effect of the

lead. 250ml bottle

• Suitable for this article
• 
  Gasoline stabilizer 250ml. Preserves and protects the fuel from ageing and
  14,38 €

Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good

resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.

rubber plug, 12mm to close e.G. drillings for cavity sealings. For sheet metals to 2mm strength

rubber plug, 14 mm, to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

rubberplug, 18mm to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

rubber plug, 6mm, to close e.g drillings for cavitysealing. For sheet metals to 2mm strength

rubber plug, 8mm, to close e.g. drillings for cavity sealing. For sheet metals to 2mm strength

rubber plug, 100 to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the

indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.

indicator cap GS left, yellow-white chromed frame

indicator cap GS right, yellow-white chromed frame

6-volt electronic flasher relay. Power output from 10 watts to 110 watts! Branded product. This

flasher relay is universally applicable for classic cars with 6-volt on-board voltage (Citroën 2CV, DS, HY, Renault R4, Renault with rear engines). It can also be used for operation with a trailer coupling!

Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power

supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation

• Suitable for this article
• 
  Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the
  15,77 €

Flange screw 1/2x20UNF for 5mm line. Length + wide ones over everything: 13 x 18mm

Flange screw 3/8x24UNF for 5mm line. Length + wide ones over everything: 10 x 18mm

Flange screw 3/8x24UNF for 5mm line. Length + wide ones over everything: 14 x 17,5mm

Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.

Flange screw 7/16x20UNF for 5mm line. Length + wide ones over everything: 12 x 21,5mm

Flange screw 7/16x20UNF for 6,5mm line. Length + wide ones over everything: 12 x 23mm

Flange screw 7/16x24UNF for 1/4 (6.35 + 6,5mm) line. Length + wide ones over everything: 12 x 22,7mm

Flange screw 7/16x24UNF for 5mm line. Length + wide ones over everything: 12 x 22,7mm

Flange screw M10x1 for 5mm line. Length + wide ones over everything: 11 x 16,7mm

Flange screw M12x1 for 5mm line. Length + wide ones over everything: 12 x 20mm

Flange screw M12x1 for 5mm line. Length + wide ones over everything: 13 x 24mm

Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewise

8mm!

• Suitable for this article
• 
  Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic
  0,49 €

Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.

• Suitable for this article
• 
  Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer
  77,26 €

Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault 4, R8, R10

Floride. Peugeot etc.

Bosch, distributor cap (system Bosch). Suitable for Peugeot 504 (2,0L), 505 (2,0L). Peugeot J5

Citroen C25. Or. No. 5941.27. Made in France.

Bosch, Distributor cap bent. Suitable for Citroen BX, VISA, Peugeot 104, P205, 309, Talbot Samba

Murena, Rancho. Height over everything: 57mm. Inside diameter: 65mm.

Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the

brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!

Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper

nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.

Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to

bend simply. Kunifer does not rust). Clinch screws please specially order!

• Suitable for this article
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake line + hydraulic line connector, for lines with 3,50mm diameters
  7,91 €

Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8
  0,75 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4)
  0,70 €
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates
  7,91 €
• 
  Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm
  0,42 €
• 
  Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining
  1,44 €
• 
  Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic
  1,24 €
• 
  Brake pipe + hydraulic pipe connector, with sheet metal bracket to attaching
  9,43 €
• 
  Hydraulic pipe connector (to connect 3 pipes). For pipe with 4,5mm diameter
  17,70 €
• 
  Brake pipe + hydraulic pipe connector. For pipe with 4,5mm diameter. Thread
  5,86 €
• 
  Hydraulic pipe connector (to connect 4 pipes). For pipe with 4,5mm diameter
  20,73 €

Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper

nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel

alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €
• 
  Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable
  9,38 €
• 
  Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.
  3,43 €

Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper

nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring

plates that are mounted on the side of the brake shoes (e.g. our item number 13054).

Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, starting from year of

construction 07/1986. Renault R5. Peugeot 104. Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction

Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, R5. Citroen Visa. Peugeot

104. Drum diameter: 180mm. Lining-wide: 32mm. Made in Europe.

Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104

Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Original equipment quality.

Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104

Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction. Made in Europe.

Brake shoes mounting set (rear). Brake system: Bendix. Suitable for Renault R4. Peugeot 104

Citroen LNA, Visa. For drum diameters: 180mm. Lining-wide: 30mm + 40mm.

Brake shoes mounting set (rear). Brake system: Lucas Girling. Suitable for Renault R4, R5, R12

R14, R15. Citroen LNA, Visa. For drum diameters: 180mm. Lining-wide: 42mm.

Brake shoe set rear, system Bendix. Drum diameter: 180mm. Lining-wide: 42mm. Suitable for Peugeot

104. Citroen LNA. Renault R12, R14, R18.