Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines
Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).
for Sonstige-Citroen Alle
1429 Articles | Page 4 of 29
Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good
resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.
Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the
indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.
6-volt electronic flasher relay. Power output from 10 watts to 110 watts! Branded product. This
flasher relay is universally applicable for classic cars with 6-volt on-board voltage (Citroën 2CV, DS, HY, Renault R4, Renault with rear engines). It can also be used for operation with a trailer coupling!
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
PDF FILE 
Bosch, distributor cap (system Bosch). Suitable for Peugeot 504 (2,0L), 505 (2,0L). Peugeot J5
Citroen C25. Or. No. 5941.27. Made in France.
Bosch, Distributor cap bent. Suitable for Citroen BX, VISA, Peugeot 104, P205, 309, Talbot Samba
Murena, Rancho. Height over everything: 57mm. Inside diameter: 65mm.
Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the
brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!
Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper
nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.
Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to
bend simply. Kunifer does not rust). Clinch screws please specially order!
Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel
alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring
plates that are mounted on the side of the brake shoes (e.g. our item number 13054).
Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, starting from year of
construction 07/1986. Renault R5. Peugeot 104. Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction
Brake shoes rear (1 set). Brake system: Bendix. Suitable for Renault R4, R5. Citroen Visa. Peugeot
104. Drum diameter: 180mm. Lining-wide: 32mm. Made in Europe.
Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104
Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Original equipment quality.
Brake shoes rear (1 set). Brake system: Lucas Girling. Suitable for Renault R4, R5. Peugeot 104
Citroen LNA, Visa. Drum diameter: 180mm. Lining-wide: 32mm. Reproduction. Made in Europe.
Brake shoes mounting set (rear). Brake system: Bendix. Suitable for Renault R4. Peugeot 104
Citroen LNA, Visa. For drum diameters: 180mm. Lining-wide: 30mm + 40mm.
Brake shoes mounting set (rear). Brake system: Lucas Girling. Suitable for Renault R4, R5, R12
R14, R15. Citroen LNA, Visa. For drum diameters: 180mm. Lining-wide: 42mm.
1429 Articles | Page 4 of 29
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
