Hydraulic line seal 6,35mm, for LHM (green) hydraulic system. 10mm outside diameter! About 10mm
long. Suitable for Citroen DS, CX, GS, SM, BX, XM etc.
for Sonstige-Citroen CX
972 Articles | Page 10 of 20
Hydraulic line rubber 6,35mm, LHM (green), 10mm outside diameter! About 8mm long. Suitable for
Citroen DS, CX, GS, SM, BX, XM etc.
Hydraulic line rubber 6,35mm. LHM (green). 12mm outside diameter. About 10mm long. Only suitable
for Citroen DS + SM, with LHM hydraulic system. This heavy rubber is for the connection at the brake system accumulator.
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
PDF FILE Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end
of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Instrument fixture (made of metal) for 1 additional instrument with 52mm diameter. Universal
fitting. Made in Germany.
Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal
fitting. Made in Germany.
K-Jetronic: System pressure control device in the fuel didtributor housing (for the constant
pressure in the fuel system of the K-Jetronic). Suitable for Peugeot 205 (1.8 turbo), 504 Cabrio + Coupe (V6 2,7L), 505 (2.0 + 2.2), 604 (2.7 + 2.8). Renault R5 (1.4 turbo 2), R30.
K-Jetronic: thermo-time switch (limits the injection time of the cold start valve in dependence of
the engine temperature). Suitable for Citroen CX2400 IE, CX 25 IE, of year of construction 06/1977 to 06/1986. Peugeot 505 2.2 (05/1981 to 12/1988), 604 2.8. Renault R5 1.4 Turbo2. R17 1,6. Overall length: 88mm. Thread: M14x1,5. Minimal delay: 1s > 35°C. Nominal delay: 8s > -20°C.
Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved
material (NBR/SBR fabric rubber)
Cable binder from rubber. Length: 50mm. Made in Germany. Now manufactured from improved material
(NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 1-4mm. Color black
Customer cut return not possible!
Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 5-8mm. Color black
Customer cut return not possible!
V-belt 10x1000. Suitable for Peugeot 404 (Paris Rhone + SEV alternating current, Injection
starting from FIN: 8.239.302 sedan, starting from 6.800.743 Coupe Cabriolet). 504, 505, 605, J7 (generator). Citroen CX 2000-2200 (generator). Renault R18, 20, 21, Espace, master (generator).
V-belt 10x1150. Suitable for Peugeot 404 (Ducellier + Paris Rhone direct current - carburetor
engine, 5750.13) + 504. Citroen CX. Renault Twingo.
V-belt 10x600mm. Suitable for Citroen DS + CX (centrifugal governor). Peugeot 505 2,5D + J5 2,5D
(Vacuum pump). Renault R5 (generator).
V-belt 10x625, suitable for Renault R4 (engine C1E + 688. 1108cc) generator. Citroen AMI 8 PREMIUM
Citroen CX, Citroen C25 for hydraulic pump! 625mm lengthens
V-belt 10x667, suitable for Renault R4 (engine C1E, C1C + 688. 956-1108cc) for the water pump
Citroen CX. 667mm lengthens
V-belt 9,5x675. Suitable for Renault R4 (845cc) generator. R6 (845cc), Dauphine Gordini, R5TL, 4CV
Peugeot J7 + J9 petrol for the generator. Citroen CX. Length: 675mm
License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4
Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany
972 Articles | Page 10 of 20
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
