Search in Sonstige-Citroen-CX for

Gasoline stabilizer 250ml. Preserves and protects the fuel from ageing and oxidation. Prevents

corrosion in the entire fuel system. Ensures problem-free immobilization of vintage cars, convertibles, motorcycles, scooters, quads, lawnmowers, chainsaws, and other petrol-driven 2-stroke and 4-stroke engines. Increases operational safety. With long-term effect. 25 ml from the dosing device preserve 5 l fuel. Before decommissioning, add the appropriate quantity to the tank and allow the engine to run for approx. 10 minutes.

• Suitable for this article
• 
  Lead substitute (fuel additive) for older petrol engines, replaces the
  12,79 €

Fuel pre-filter. For fuel pumps with round cover. Almost all available fuel pumps of our catalog

are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.

• Suitable for this article
• 
  Fuel pump cover gasket. For fuel pumps with round cover. Almost all available
  1,29 €

Mini Dent Puller. This mini suction puller its strong pulling power is ideal for minor car panel

dents. 55mm diameter suction disc. Can be used in pairs if necessary provides strong pulling power.

Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines

Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).

Bitumen mats (anti-roar plates) self adhesive, 6 plates. 550 x 250mm. Universal fitting.

Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.

Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.

Lead substitute (fuel additive) for older petrol engines, replaces the lubricating effect of the

lead. 250ml bottle

• Suitable for this article
• 
  Gasoline stabilizer 250ml. Preserves and protects the fuel from ageing and
  14,38 €

Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good

resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.

rubber plug, 12mm to close e.G. drillings for cavity sealings. For sheet metals to 2mm strength

rubber plug, 14 mm, to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

rubberplug, 18mm to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

rubber plug, 6mm, to close e.g drillings for cavitysealing. For sheet metals to 2mm strength

rubber plug, 8mm, to close e.g. drillings for cavity sealing. For sheet metals to 2mm strength

rubber plug, 100 to close e.g. drillings for cavity sealings. For sheet metals to 2mm strength

Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the

indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.

Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power

supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation

• Suitable for this article
• 
  Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the
  15,77 €

Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.

Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8. Suitable wrench likewise

8mm!

• Suitable for this article
• 
  Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic
  0,49 €

Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.

• Suitable for this article
• 
  Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer
  77,26 €

Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the

brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!

Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper

nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.

Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to

bend simply. Kunifer does not rust). Clinch screws please specially order!

• Suitable for this article
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake line + hydraulic line connector, for lines with 3,50mm diameters
  7,91 €

Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8
  0,75 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4)
  0,70 €
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates
  7,91 €
• 
  Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm
  0,42 €
• 
  Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining
  1,44 €
• 
  Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic
  1,24 €
• 
  Brake pipe + hydraulic pipe connector, with sheet metal bracket to attaching
  9,43 €
• 
  Hydraulic pipe connector (to connect 3 pipes). For pipe with 4,5mm diameter
  17,70 €
• 
  Brake pipe + hydraulic pipe connector. For pipe with 4,5mm diameter. Thread
  5,86 €
• 
  Hydraulic pipe connector (to connect 4 pipes). For pipe with 4,5mm diameter
  20,73 €

Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper

nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel

alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €
• 
  Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable
  9,38 €
• 
  Clinch screw, for 6.35mm hydraulic pipe. Thread: 12x1,25mm.
  3,43 €

Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper

nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

• Suitable for this article
• 
  Hydraulic line Brake line flaring tools for use at the vehicle (to use at the
  524,59 €
• 
  Pipe cutting equipment for brake hoses!
  8,83 €

Brakes cleaner 500ml, spray bottle, removes even other filth,

Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of

construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of

construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Brake pads rear (ATE). Suitable for Citroen CX, all models (sedan) starting from year of

construction 1974. Citroen BX. Dimension: 54.1 x 64,6mm.

brake pads rear Citroën CX / BX all models, 74> 54x70mm

brake pads front Citroën CX, 99x80.5mm

Hydraulic pipe connector (to connect 3 pipes). For pipe with 4,5mm diameter. Thread: M9

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4)
  0,70 €
• 
  Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic
  1,24 €

Brake pipe + hydraulic pipe connector, with sheet metal bracket to attaching. For pipe with 4,5mm

diameter. Thread: 9mm.

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4)
  0,70 €
• 
  Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic
  1,24 €

Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings

A brake pipe flaring machine is not necessary. Or. No. 1D5426236B

Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV

Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!

• Suitable for this article
• 
  Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer
  58,41 €
• 
  Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer
  163,53 €

Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV

Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!

Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV

Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!

Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable for Citroen 2CV

Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!

Brake pipe + hydraulic pipe connector. For pipe with 4,5mm diameter. Thread: 9mm thread! Or. No

1D5426236B

• Suitable for this article
• 
  Clinch screw 4,5mm, M9 thread. For Citroen hydraulic connectors.
  0,81 €
• 
  Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4)
  0,70 €
• 
  Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic
  1,24 €

Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both

sides: M8x1.25. Optimal if 2 lines are to be connected to each other.

• Suitable for this article
• 
  Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS
  0,49 €
• 
  Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8
  0,75 €

Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line

(connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.

Break line set for CX Break, Prestige,09.76-90, stainless steel, 7 lines in to

Break line set for CX, short model09.76-90, stainless steel, 7 lines in to

Brake line wrench. 10mm + 11mm. Workshop quality.

• Suitable for this article
• 
  Brake line wrench. 8mm + 9mm. Workshop quality.
  8,88 €

Brake line wrench. 8mm + 9mm. Workshop quality.

• Suitable for this article
• 
  Brake line wrench. 10mm + 11mm. Workshop quality.
  8,88 €