for Sonstige-Citroen Estafette
O-Ring Assortment, 386 pcs. 32 sizes R-01 - R-32, inner-ø 3-44 mm, oil-, petrol- and
acid-resistant. Made in Germany.
Oil draining pump 12 Volt. Ideal for emptying the hydraulic tank. For example Citroen DS, CX, GS
etc.. Of course other huiles oils can also be pumped with it. Super practical.
Oil filter (LS309). Thread: M20 x 1,5. Suitable for Renault R4 (112, 1128, S128, 2370, 210B, 239B)
Engine: 1108cc. Installed from year of construction 06/1978 to 1990. Renault R5 + R6.
Oil pan sealing set. Engine: 956cc + 1108cc + 1289cc. Suitable for Renault R4, R5, R6, Floride
Caravelle, R8, R10, Estafette, R12, Fuego. Or. No. 7701453950
Pedal rubber, original Paulstra (no reproduction). Suitable for Renault R4, R5, R6, R7, R8, R10
R12, R15, R16, R17. For pedals with about dimensions: 43mm x 68mm. Or. No. 0606090800. Per piece.
Positive cable (battery to starter motor). Overall length: 500mm. Cable diameter: 16mm². Made in
the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml. Eliminates tough stains and soils like
oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
R16/Estafette/R15, wheel brake cylinder rear, on the left + on the right fitting. Brake system
Bendix. Suitable for Renault R16, Estafette, R15 TS, R12 BREAK, R17TL/TS. Piston diameter: 22mm. Brake line connector: 3/8x24UNF. Mounting board bore: 36mm. Length over everything: 69mm. Made in Europe.
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner
diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to
41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4/Estafette, locking knob for the sliding window (original Renault, no replica!). Suitable for
Renault R4 + Estafette. Colour: grey! Attention: Including all mounting material!
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: beige
Note: Inclusive fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: black
Note: Inclusive fixing bolt.
R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).
R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5
800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 19mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, Estafette.
R4/R16/Estafette, master brake cylinder sealing set (single circuit brake system). For piston
diameters: 19mm. Suitable for Renault R4, starting from year of construction 1970. Renault R16 + Estafette.
R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, from 1975 onwards. Engines Renault
688.02/10/11,688, C1E (1108ccm). Standard dimension
R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault
R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.
R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc
(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.
R4/R5/R8, cylinder head gasket. Engine: 688, 813 (1108cc). Suitable for Renault R4 1,1L, starting
from year of construction 1978. R5, R6, R8, R8 Malor, Floride S, Estafette (R2132).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize
(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize
(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard
dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
