transmission for Sonstige-Citroen HY

Differential bearing inside. Suitable for Citroen HY, all years of construction. Dimension: 45 x 85

5 x 23. Or. No. 502895 + ZC9502 895U

Double ball bearing, for the primary shaft rear. Suitable for Citroen DS, with 4 gear gearbox

Dimension: 30 x 72 x 78.6 x 30,2. Or. No. ZC9620164U

Gearbox sealing ring. Suitable for Citroen HY, starting from year of construction 1974. Citroen DS

Or. No. 22478009K

Gearbox sealing ring. Suitable for Citroen HY, to year of construction 1974. Dimension: 26.0 x 32.0

x 2,5mm. Or. No. 22474009G

Gearbox bearing for the primary shaft (the rear of the two rear bearings). Suitable for Citroen HY

all years of construction. Dimension: 30 x 62 x 16. Or. No. 89990 + ZC9088 090 U.

Gearbox bearing for the primary shaft (the front of the two rear bearings). Suitable for Citroen

HY, all years of construction. Dimension: 30 x 62 x 20. Or. No. 89981 + ZC9089 981 U.

Gearbox bearing, for the shaft for the bevel gear. Suitable for Citroen HY, to year of construction

09/1966. Dimensions: 35 x 80 x 21. Attention: This bearing has been reproduced like the original bearing. It is not a standard bearing as it is often offered! Or. No. 507539 + ZC9507 539U. Made in France.

Gearbox sealing set. Suitable for Citroen HY. Or. No. 5456896. Made in Germany.

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Gearbox bearing above (primary shaft). Suitable for Citroen HY, of year of construction 1948 to

09/1966. Dimension: 25 x 62.0 x 24mm. Or. No. 506287 + ZC9089448U

Gearbox bearing on top, front (primary shaft). Suitable for Citroen HY, from year 01/1972. Citroen

DS (4 speed gearbox), from year 11/1971. Dimensions: 25 x 62,0 x 67 x 25,4mm. Or. No. 1G 5437164J

Gearbox bearing lower (jackshaft). Suitable for Citroen HY, starting from year of construction

09/1966. Dimension: 30 x 72.0 x 78.5 x 30,2mm. Or. No. ZC9620286U + 620010

Gearbox bearing lower (jackshaft). Suitable for Citroen HY, of year of construction 1957 to

08/1966. Dimension: 30 x 72.0 x 78.5 x 30,0mm. Or. No. 620071

Gearbox Oil addetive, 20g. Suitable for 1 liter transmission oil. This additive has been specially

developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and better fuel-efficiency.

Ball bearing, for primary shaft. Suitable for Citroen DS. Dimension: 30 x 62 x 16mm. Or. No

ZC9620159

M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +

Citroen DS. Measurement: M9x42mm.

• Suitable for this article
• 
  M9, nut M9x1,25. For example mounting drive shaft at the gearbox for 2CV
  2,29 €
• 
  Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm (interior

square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6. Or. No. 0311.07 + 0311.04

• Suitable for this article
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm

(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6

• Suitable for this article
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Locking plate, for the drive shaft securement at the gearbox. Suitable for Citroen HY. Or. No

ZC9409506U. Per piece. Made in Germany.

Shat seal primary shaft. Suitable for Citroen HY. Dimensions: 21 x 40 x 10mm. Or. No. ZC 9612512U

Synchronizer, suitable for Citroen HY, starting from year of construction 1967. Citroen ID

starting from year of construction 1964. Or. No. HY335-16

Identification plate green, for Citroen. 78x40mm. 2 bores. (Metal). The green identification plates

were often used for gearbox identification!