Other-Citroen / SM / front axle

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

Quality: 2

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molybdenum universal grease in tube, 230g. High performance rolling bearing grease for lubricating wheel bearings, cardan joints etc.

Quality: 3

• Suitable for this article
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

Quality: 3

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Grease gun, for lubricating grease cartridge. Hobby quality!

Quality: 4

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

Quality: 2

• Suitable for this article
• Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bea
  8,32 €
• Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease wa
  7,93 €

Rubber stop squarely, above, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or. No. 5410588

Quality: 3

• Suitable for this article
• Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen DS BREAK. Or.Nr
  6,64 €

Rubber stop squarely, down, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or. No. 5410589

Quality: 3

• Suitable for this article
• Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen DS BREAK. Or.Nr
  6,64 €

Ball pin setting shim down (front axle). Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x 48,4mm. Heavy 5.50>5,51mm. Or. No. DX41304R

Quality: 3

Ball pin collar retaining clip (for the lower ball pin). Suitable for Citroen DS + Citroen SM. Or. No. 1D5410072K

Quality: 3

Collar for the ball joint, at the wheel hub. Suitable for Citroen DS, SM + HY. Very good reproduction. Dimension about: 16x79mm. Or. No. ID 5410027F

Quality: 1

Lubrication nipple cap from synthetic. Color: Red.

Quality: 1

Lubricate nipple with M7 thread. Suitable for Citroen 2CV, DS, 11CV, HY, etc.

Quality: 3

• Suitable for this article
• Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Lubrication nipple M8 x 1,25. (Taper lubrication nipple H1, straight). Wrench: 9,0mm.

Quality: 3

• Suitable for this article
• Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

SM, wheel hub front left, suitable for Citroen SM. In exchange. The wheel hub has been repaired with a new wheel bearing and new carrying joints. Plus 150 EURO old part deposit

Quality: 3

SM, wheel hub front right, suitable for Citroen SM. In exchange. The wheel hub has been repaired with a new wheel bearing and new carrying joints. Plus 150 EURO old part deposit.

Quality: 3

SM, radius arm unit in front on the left, in the exchange. Suitable for Citroen SM. Plus 250 Euro Old part deposit. Or. No. 8S5405596D

Quality: 3

SM, radius arm unit in front on the right, in the exchange. Suitable for Citroen SM. Plus 250 Euro Old part deposit. Or. No. 8S5405598A

Quality: 3

Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,20mm.

Quality: 3

• Suitable for this article
• Ball joint nut. Suitable for Citroen DS + Citroen SM. Dimension: M16 x 150. Or.Nr. ZC9615752U
  7,39 €
• Ball joint locking nut (crown nut), for the upper ball joint. Suitable for Citroen DS, starting
  12,79 €
• Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,20mm.
  4,42 €
• Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,30mm.
  4,42 €
• Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,40mm.
  4,42 €
• Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,50mm.
  4,42 €

Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,30mm.

Quality: 3

Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,40mm.

Quality: 3

Ball pin above, adjusting disk. Suitable for Citroen DS + Citroen SM. Thickness: 2,50mm.

Quality: 3

Ball joint (ball pin) at the bottom, on the front axle. Suitable for Citroen DS, starting from year of construction 1965. New reproduction - version! This ball joint is supplied with a new housing, and is mounted without adjusting discs.

Quality: 1

Ball pin down, adjusting disk. Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x 48,4mm. Thickness: 5,60mm.

Quality: 3

Ball pin down, adjusting disk. Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x 48,4mm. Strength: 5,70mm.

Quality: 3

Ball pin down, adjusting disk. Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x 48,4mm. Thickness: 5,80mm.

Quality: 3

Ball pin down, adjusting disk. Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x 48,4mm. Thickness: 5,90mm.

Quality: 3

Ball joint nut. Suitable for Citroen DS + Citroen SM. Dimension: M16 x 150. Or.Nr. ZC9615752U

Quality: 3