4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm
Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.
crankshaft-camshaft-piston-flywheel for Sonstige-Citroen Sonstige-Renault
73 Articles | Page 1 of 2
4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter
132mm. Inside diameter: 24mm. Original from Ferrozell!
4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm
Outside diameter: 53,5mm. Wide one: 19mm.
Alpine110, R12 Gordini, R17TS, piston + liner (4 pieces). Suitable for Renault alpine one 110, R12
Gordini, R17TS (R1313, R1323). Engine: 807 12/20. Engine capacity: 1564cc. Bore: 77mm. Piston pin: 21 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.
A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm
Piston pin: 23.5 x 72,0mm. Piston rings: 1,5 + 2.0 + 4,0mm.
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75
2.0 + 4,0mm. Renault R5, R12, R15 (R1224, R1330, R1337).
Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings
1,75mm + 2,0mm + 4,0mm. Renault R5, R6, R10, R12 (R1192, R1170, R1171, R1337, R2126, R2136, R2137).
Piston ring set, per piston. Suitable for Renault engine: 841-843-C7-D7 (1647ccm). Bore: 79mm
Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R16, R18, Alpine A310.
Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2664cc. Suitable for Peugeot 504 V6, 604
V6. Renault R30, R25 V6, Alpine A310.
Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2849cc. Suitable for Peugeot 604 V6
Renault R30, R25 V6, Alpine A310.
P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1
chain link, length: 44 chain links.
P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc
Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.
P 504 V6/604 V6/R30/Alpinen 310 V6, connecting rod bearing set (bimetal), standard measurement of
60 mm, with stroke offset. Engines 2,7L + 2,85L.
Piston rings for V6 engine. 2,7L. 88mm bore. Suitable for Peugeot 504 V6 Cabrio + Coupe. Peugeot
t 604 V6. Renault R30 + Alpine A310 V6. Complete set for 6 pistons! Dimension of piston rings: 1,5mm + 2,0mm + 4,0mm.
P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing kit small (trimetal). 0,30 oversize. For
52mm crankshaft. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.
P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing set small (trimetal). Standard dimensions
For 52mm diameter. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.
P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). 0,30 oversize. Suitable for
Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France
P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). Standard dimensions. Suitable for
Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France
P 504V6/604/R30, liners sealing rings down (6 fittings). Suitable for Peugeot 504 V6 + Peugeot 604
V6. Renault R30. Talbot Tagora 2.6. 2664cc. Inside diameter: 91mm. Outside diameter: 100mm.
P 504V6/R30, camshafts shaft seal (left-hand rotation). Suitable for Peugeot 504 V6, 604 V6
Renault R30 V6, Citroen XM. Dimension: 32 x 45 x 8mm.
Primaquatre, camshafts drive wheel (Novotex). 52 teeth. Outside diameter: 161mm. Inside diameter
22mm. Original from Ferrozell
Primaquatre, camshafts drive wheel (Novotex). Suitable for Renault Primaquatre, starting from year
of construction 1946 (R2160, R2060, R2062). Engine: 603. 52 teeth. Outside diameter: 161mm. Inside diameter: 38mm.
R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for
Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.
R16/R12/R16, piston ring set (for 1 piston). Suitable for Renault R16, R12, R17. Bore: 77mm
Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.
R16/R12Gordini/R17/R20. Camshaft drive chains set, consisting of camshaft drive chain duplex - 72
chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.
R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16
R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16/R17/R18/R20, piston + liner (4 item). Renault engine 841 01
04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.
R16/R18/R20, bottom liner gasket (foot gasket. Suitable for Renault R16 TA (01/1973 to 08/1980) +
R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226
R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner
diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension
Inner diameter 44mm, outer diameter 55,6mm, 1,9mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to
41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5
800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182
R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 35 teeth. Inside diameter
35,75mm. Outside diameter: 100,06mm.
R4/R5/R12, gear rim fly wheel. 117 teeth. Suitable for Renault R4, R5, R12. Inside diameter
22,2cm. Outside diameter: 24,7cm. Thickness: 0,8cm.
R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault
R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.
R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle
Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for
Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines
C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)
73 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
