intake and exhaust manifold for Sonstige-Citroen Sonstige-Renault

Seal intake manifold (per piece). Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 +

R17. Fuego (1,6L). Or. No. 0857720900

Seal intake manifold (per piece). Suitable for Renault R16 1,6/TS/TX. Renault R15 + R17 (1.6 L

engine). Fuego (1,6L). Or. No. 0857720800

Seal exhaust elbow. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego

(1,6). Or. No. 7700501840

Seal Y-pipe. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L)

Peugeot 505,2.0 TI/STI + 2.2 GTI. Or. No. 7700657683 + 7701036761

Seal manifold for inlet + exhaust. Suitable for Renault R16 (R1152, 1153, 1157). R12 (1.6 Gordini

R1173).

Manifold seal for inlet + exhaust. Suitable for Renault Super5, Clio, R11. For the engines: 688

711, 688 712, CIC700/6/8/54, CIE700, CIE 714/15/28/19. Engine capacity: 956cc, 1108cc, 1237cc, 1397cc. Or. No. 7700706149

Manifold seal, inlet + exhaust. Suitable for Renault R4, R5, Estafette, R12. For engines with

engine capacity: 852cc, 955cc, 1108cc, 1289cc.

Crankcase ventilation (engine ventilation) Y-connector. Suitable for Renault R4 with engine: 800

(Billancourt). This connector is mounted between the hose from the valve cover and the connections to the carburettor and the intake manifold. Diameter of connections: 10,5mm/14mm + 6,5/10mm + 5,0/8,0mm. Or. No. 7700621597

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper

nuts: no rust, no sticking!

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

Seal under carburetor Peugeot 104, Renault R14. (Insulating clamp between manifolds + carburetor).

P 504 V6/R30, intake manifold seal, for Peugeot 504 V6, 604 V6. Renault R30, Alpine A310 V6

(Rubber seal). Outside diameter: 54,5mm. Inside diameter: 45mm. Or. No. 0348.24

P 504/604/R30, exhaust elbow seal. Suitable for Peugeot 504 V6 + 604 V6. Renault R30 + Alpine A310

V6. Inside diameter: 3 x 35mm. Bore diameter: 12 x 8,0mm + 3 x 9,0mm. Or. No. 0349.28

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

Seal under carburetor (insulating plate between carburetor and intake manifold). Suitable for

Renault Fuego.

Seal under carburetor (insulating plate between carburetor and intake manifold). Suitable for

Renault R12, R15, R16. Diameter: 20,5mm. Attachment holes: 50mm.

Seal under carburetor (insulating plate between carburetor and intake manifold). Suitable for

Renault R4, R5, R8, R12. Inside diameter: 32mm.