for Alle 2CValt
1702 Articles | Page 19 of 35
Cable terminal strip, with 3 connection. Suitable for Citroen 11CV + 15CV. This terminal strip can
be also universal used. Optimally to connect the positive cables cleanly. Or. No. 710161
Headlight plug (with long connection cable + round plugs), for Bilux or H4 bulb. Suitable for
Citroen DS, Citroen 2CV, Citroen HY. Made in Germany.
Connector suitable for main headlights, for Citroen 2CV, Dyane, Ami6+8, HY. The plug is supplied
with short cable ends and round plugs.
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Box nut suitable for the securement of the wheel cover, for Citroen 2CV, Peugeot 204 + 304. The box
nut is pressed from the rear into the rim! Thread M10.
Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Citroen
2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip, 4x spring hinged tie bar adjustment from high-grade steel. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspension
pot hinged tie bar at the radius arm). Measurement: 45 x 14,29mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, galvanizes. Suitable for Citroen 2CV rear. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 45 x 14mm. Reproduction from South America.
Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12,21mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin small, galvanizes. Suitable for Citroen 2CV front. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12mm. Reproduction from South America.
Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle
pin largely, 2x triangle pin small, 8x clip. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84 + AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 1-4mm. Color black
Customer cut return not possible!
Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 5-8mm. Color black
Customer cut return not possible!
License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4
Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany
License plate light cap (suitable for on the left, on the right + centrically) for Citroen 2CV to
year of construction 1963 + Citroen HY. The cap is supplied without lower seal and support.
License plate light cap centrically. Suitable for Citroen 2CV, to year of construction 1954. AZU
250 + HY (early years of construction, license plates above over tail gate)
License plate light complete (1x set = 1x left + 1x right). Suitable for Citroen 2CV until year of
construction 1963, AZU + HY. Colour: light grey. This set consists of 2 complete lights with bracket and seal.
License plate light completely, centrically ( separable license plates), for Citroen 2CV to year of
construction 1963 (diagonal tail sheet metal) + Citroen HY. Through seal and or paint from a side glass, can the light used also for on the left of or on the right. Colour: dark grey
Children's push 2CV (for learning to walk). Approx. 78cm long. Made entirely from wood. Made in the
EU. This cute 2CV is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
VIDEO Children's push Renault R4 (for learning to walk). Approx. 78cm long. Made entirely from wood. Made
in the EU. This cute R4 is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
Toggle switch with polished head. Version: Changeover switch. 3x electrical connection. Load
capacity: 5 amps. Bore diameter: 12.5mm. This switch is a changeover switch. You can therefore switch 2 functions. But of course it can also be used as a normal toggle switch. Then only 2 electrical connections are connected.
Clip (200 fittings) for the coverings. Suitable for Citroen, Peugeot, Renault. If the seats are
again upholstered, this clip is required. The suitable pliers have our number 18084.
Hog Rings (500 per pack) for 21048 automatic pliers (coverings). Suitable for Citroen, Peugeot
Renault. The suitable pliers have our number 21048.
Clip for the securement of the coverings at the seat frame. (slide-on clamp with hooks). Suitable
for citroen 2CV, Dyame, Ami, DS, HY.
Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater
cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.
Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version
With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.
Clip for the sill trim (aluminium), suitable for Citroen 2CV. The clip also fits the bumper
mouldings for the 2CV up to 1961, the wide side mouldings for the Citroen DS and the cardboard radiator cowling for the Renault Dauphine. This clip is not as extremely strong as our number 16844, but is particularly suitable for aluminium trims (easier to fit, as aluminium trims are extremely sensitive to pressure).
Clip for the sill trim (stainless steel), suitable for Citroen 2CV. The clip also fits for the trim
strips on the bumper for 2CV up to 1961. For the Citroen DS for the wide side trim strips and for the cardboard radiator cowling for the Renault Dauphine. This clip is extremely sturdy. It is particularly suitable for trim strips made of stainless steel. For aluminium trims, we recommend the softer clip 16831.
clear coat 400ml spray can. In case of metallic paint always paint an additional layer of clear
coat on top, this is the only way that the paint is hardening
1702 Articles | Page 19 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
