Cover plate fur the accelerator box for the Choke, for oval carburetor 2CV6 (If the pump is missing
or is defective.) Made in Germany.
carburetor and carburetor gasket sets for Alle Mehari
All fuel-controlling spare parts from us, are not applicable for fuel with an ethanol content of more than 5%. The warranty is not valid if high ethanol content such as E10 or greater is being used. Damages like swelling, dissolving or decay are a sign of using too much ethanol. Unfortunately, the developers of modern fuel are considering the impact on our cherished properties ever less.
77 Articles | Page 1 of 2
Pin, for the connection throttle control cable to the oval carburetor. Suitable for Citroen 2CV6
Length: 18,0mm. Diameter: 4,93mm. Or. No. AM142-67
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
PDF FILE Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,5mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 2,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Throttle valve spring for the throttle valve shaft. Suitable for 2CV6 starting from year of
construction 1981. (oval carburetor). The spring is mounted at the exterior of the carburetor.
Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges, you can determine the
diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).
Spring for the Choke flap in the carburetor. (oval carburetor). Dimension: 0,5 x 4,5 x 20mm
Suitable for Citroen 2CV6.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, starting from year of
construction 09/1972. For carburetor 26/35 CSIC + 26/35 SCIC.
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, to year of construction
09/1972. Nozzle measurement: 55. For carburetor 26/35 CSIC + 26/35 SCIC.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 28SCIC, 28 CIC, 34 PICS
Renault R4, R5, R6, R12 R18, Fuego for carburetor Solex 32 SEIA, 32 EISA4, 32 SEIMA. Peugeot 504, carburetor Solex 32/35 SEIEA.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 34 PICS3, Solex 40 PCIS3, 40
PICS3. 16mm plate, 8mm follower.
Screws for the carburetor cap. Suitable for Citroen 2CV with oval carburetor. (6 fittings). The
screws correspond optically to the original screws.
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Vacuum diaphragm, pulldown, for the Choke (cold engine starting). Suitable for Citroen 2CV6. The
diaphragm is mounted at the carburetor above. Or. No.: 95568478
Carburetor sealing set (only seals), inclusive Seal under carburetor, for oval carburetor SOLEX
26/28/35 CSIC, SCIC. Suitable for Citroen 2CV starting from year of construction 1981, Dyane, AMI. Made in Germany.
Carburetor sealing set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10.
Carburetor setting gauge. For the height adjustmenting from the carburetor float. Suitable for
Citroen 2CV6, Dyane 6, Mehari. For oval carburetor Solex 26/35. Made in Germany.
Carburettor oval (new part), for Citroen 2CV6, Solex 26/35. All carburettors are disassembled by
us, and the float level (float gauge) is adjusted. The carburetor is then mounted on a 2CV 6 engine and subjected to a test run. We then adjust the carburetor completely according to Citroen specifications. The carburettor is therefore ready for installation and requires only a minimum of adjustment to your engine. The workload of around 1.5 hours is already included in the sales price.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. With carburettor jets.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. Without carburettor jets.
Carburettor repair kit for oval carburettor (with carburettor jets), for Citroen 2CV6 ( up to year
1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump, carburettor jet stage 2 (110 + 125), jet idle, CO regulating screw. Made in Europe
Carburettor repair kit for oval carburettor (without carburettor jets), for Citroen 2CV6 ( up to
year 1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump
Carburettor repair kit for oval carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 26/35 CSIC + 26/35 SCIC. With this set, the original carburettor can be repaired (of course you need expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburettor repair kit for round carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 34 PICS. With this set, the original carburettor can be repaired (of course, this requires expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
77 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
