2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm. Height over everything
7,50mm. Or. No. AM124-11C
Cylinder head for Alle Mehari
47 Articles
2CV6, valve spring outside (large spring), for inlet + exhaust valve Citroen 2CV6. Outside
diameter: 31,5mm. Height: 47,5mm. Or. No. AM124-25A
Rocker lever axle fixing bolt (special bolt head). Suitable for Citroen 2CV6, Dyane, Mehari
Dimension: M8x44. Or. No. ZC9622812U
Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc
engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany
Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787
Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm
Original equipment manufacturer "Glaser"
Engine repair kit (new parts only). Suitable for Citroen 2CV6, Dyane6, Mehari. Consisting of 2x
pistons + liners with compression ratio 8.5:1. New cylinder head left + right (incl. valves and rocker arms). Engine gasket set with oil seals, oil filler neck, oil filter. The crankshaft and camshaft are overdimensioned and can normally be used for a running performance of 500,000 km without any problems.
Engine repair kit (new parts only). Suitable for Citroen 2CV6, Dyane6, Mehari. Consisting of 2x
pistons + liners with compression ratio 9:1. New cylinder head left + right (incl. valves and rocker arms). Engine gasket set with oil seals, oil filler neck, oil filter. The crankshaft and camshaft are overdimensioned and can normally be used for a running performance of 500,000 km without any problems.
Oil line for 2CV6, significant reproduction from the European Union. Produced from cuprous nickel
(Oil line from the engine block to the cylinder heads)
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
h rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction
Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!
Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are made from an
improved material, making them significantly more durable.
Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piece
Manufacturer original "GLASER".
Valve clearance adjustment screw, suitable for Citroen 2CV6 + 4. Measurement: 7x17,5mm, overall
ll length 25mm. Or.Nr. A124-4
Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is
tightened frequently too strongly, and licks then oil.
2CV starting from 1971, stud bolt M7x76mm, for the mounting the valve cap on the cylinder head
Suitable for Citroen 2CV starting from year of construction 1971.
2CV until 1971, stud bolt M7x83,5mm, for the mounting the valve cap on the cylinder head! Suitable
for Citroen 2CV to year of construction 1971.
VIDEO Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from
silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.
valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside
diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A
Valve guide inlet valve for Citroen 2CV6. Length: 47mm, outside diameter 12,5mm, inside diameter
8,00mm, fit above 10,5/11mm.
Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3 grooves. Suitable for
inlet + exhaust valve. You need 2 pieces per ventil.
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Cylinder head left, new part. Suitable for Citroen 2CV6, Dyane6, Mehari. The cylinder head is
supplied with valve push rod tubes, valves and rocker arms.
Cylinder head right, new part. Suitable for Citroen 2CV6, Dyane6, Mehari. The cylinder head is
supplied with valve push rod tubes, valves and rocker arms.
47 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
