Search for R4
You are currently searching without specifying a vehicle / model.
To give you a better search experience, we recommend that you select your vehicle.
Select vehicle now No thanks
1223 Articles | Page 11 of 25
R4-F4/ R4-F6, shock absorber rear (2 fittings). Suitable for Renault R4 F4 + F6, of year of
construction 10/1962 to 1992 (station car).
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner
diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension
Inner diameter 44mm, outer diameter 55,6mm, 1,9mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to
41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4/5, cylinder head gasket set completely, inclusive cylinder head gasket (original REINZ)
Suitable for Renault R4, with 747cc, 782cc + 845cc. Of year of construction 1962 to 1989. Renault R5 (845cc), of year of construction 10/1972 to 12/1984. R6 from 10/1969 to 04/1980. Manufacturer original REINZ!
R4/8/R10/R12, wheel brake cylinder sealing set, rear. for piston diameters: 22,2mm. Brake system
Bendix. Suitable for Renault R4. R8 starting from year of construction 1970. R10, R12, R14, R18.
R4/Dauphine, indicator support in front, for round indicator. Suitable for Renault R4, 1 series +
Renault Dauphine. Outside diameter: 62mm. Or. No. 0854573400
R4/Dauphine, indicator cap (with trim ring) in front, for round indicator. Suitable for Renault R4
1 series + Renault Dauphine. Outside diameter: 71mm
R4/Dauphine, indicator cap in front, for round indicator. Suitable for Renault R4, 1 series +
Renault Dauphine. Outside diameter: 71mm. The indicator cap has an 'E' test mark!
R4/Dauphine, rubber, under round indicator in front. Suitable for Renault R4, 1 series + Renault
Dauphine. Outside diameter: 75mm
R4/Estafette, locking knob for the sliding window (original Renault, no replica!). Suitable for
Renault R4 + Estafette. Colour: grey! Attention: Including all mounting material!
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: beige
Note: Inclusive fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: black
Note: Inclusive fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4. Color: grey! Note: It is
only the synthetic button, without fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4. Color: black! Note: It is
only the synthetic button, without fixing bolt.
R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).
R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5
800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182
R4/F4/F6, front axle stabiliser. Diameter: 16mm. Without fixing material. Suitable for Renault R4
R4 F4, R4 F6, R6. The 16mm stabilizer was originally only used for R4 F4 + R4 F6. However, it can be fitted to the saloons without any problems. The thicker stabiliser gives a slightly firmer ride. Mady in Europe
R4/rear engine, brake fluid reservoir with locking cap. Suitable for many Renault. Diameter: 57mm
Reservoir amount with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5.
R4/rear engine, master brake cylinder sealing set. For piston diameters: 3/4 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, R8, R10.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 15/16 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 19mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, Estafette.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 22mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/rear engine, wheel brake cylinder front on the left. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
R4/rear engine, wheel brake cylinder front on the right. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
R4/R16/Estafette, master brake cylinder sealing set (single circuit brake system). For piston
diameters: 19mm. Suitable for Renault R4, starting from year of construction 1970. Renault R16 + Estafette.
R4/R16/R12, brake power controller. 4x 3/8x24UNF brake pipe connections. Suitable for Renault R4
of year of construction 1976 to 1986. Renault R16 TL, of year of construction 01/1971 to 12/1976. Renault R5, Renault R12. Or. No. 770685455. Attention, there are also vehicles with 3x 3/8 + 1x 7/16 connection. For these purposes we have a suitable adapter (84372) in our delivery programme.
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "E
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "F
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 35 teeth. Inside diameter
35,75mm. Outside diameter: 100,06mm.
R4/R3/Dauphine Gordini/Dauphine/Floride, engines: 680 (603cc/747cc, bore 54.50mm), 839 (782cc, bore
55.80mm), 670-04-05 / 800 (845cc, bore 58.00mm). Complete engine gasket set, including cylinder head gasket. Without valve stem seals and oil seals. Please pay close attention to the cylinder head gasket + timing case gasket!
R4/R5, thrust washer - brass sealing disc. This disc is mounted on the drive shaft and seals the
wheel bearing to the rear. Suitable for Renault R4, R5, R6. Or. No. 7700528678
R4/R5, brake caliper seal kit. Brake system: Bendix. Suitable for Renault R4 + R5. Piston diameter
45 mm. Please note: The seal kit is supplied with 2 different dust caps, as there were 2 different versions in production at Bendix!
R4/R5, brake caliper sealing set. Brake system: Lucas Girling. Suitable for Renault R4 + R5. Piston
diameter: 45mm. Amount of dust cap: about 10mm. The dust cap is fastened with a metal ring!
R4/R5, brake caliper sealing set. Brake system: Lucas. Piston diameter: 45mm. Suitable for Renault
R4 + R5. Amount of the dust cap: 7,5mm.
R4/R5, Lucas + Bendix brake caliper: guide sleeve set. Suitable for Lucas Girling + Bendix brake
caliper. This repair kit is suitable for the following vehicles: Renault R4, R5, Clio 1, Espace 1+2, Twingo 1, Super 5, R9, R11, R18. Alpine V6 1 (1985>1992), Fuego. Citroen C25 + Peugeot J5, Peugeot 205.
R4/R5, brake caliper front on the left (new part). Brake system Bendix. Suitable for Renault R4 +
R5. Return of old-part not necessary.
R4/R5, brake caliper front on the right (new part). Brake system Bendix. Suitable for Renault R4 +
R5. Return of old-part not necessary.
R4/R5, brake caliper, front on the left (new part). Brake system: Lucas Girling. Suitable for
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201168.
R4/R5, brake caliper, front on the right (new part). Brake system: Lucas Girling. Suitable for
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201169.
1223 Articles | Page 11 of 25
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
