R4/R5/R16, brake power controller suspension spring. This spring is suitable for the brake power
controller with 3 and 4 lines! The brake power controller is suspended from this spring! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514841
Search for R4
You are currently searching without specifying a vehicle / model.
To give you a better search experience, we recommend that you select your vehicle.
Select vehicle now No thanks
1223 Articles | Page 13 of 25
R4/R5/R16, brake power regulator bracket. This bracket is suitable for the brake power regulator
with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700629722 + 7700629723
R4/R5/R16, brake power controller tension spring (for brake load-dependent actuation). This spring
is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514080
R4/R5/R16, brake power controller, 3 brake line connectors (2x E-flange + 1x F-flange). Suitable
for Renault R4, starting from year of construction 1968. Renault R16, all model`s. Renault R5 TS + TL, R6
R4/R5/R16, electric motor for the radiator fan. Suitable for R4 (1108cc). Renault R5, R6, R9, R11
R14, R16, R18, R19, Espace. Or. No. 7700828623
R4/R5/R16, Kühlerlüfter incl. Lüfterflügel. Passend für Renault R4 (1108ccm), R5, R6, R9, R11
R14, R16, R18, R19, Espace.
R4/R5/R16, locking ring for radiator fan (fixing fan blade to fan motor). For 8mm shaft. Suitable
for Renault R4 (1108ccm), R5, R6, R9, R11, R14, R16, R18, R19, Espace.
R4/R5/R6, brake hose front. Suitable for Renault R4, starting from year of construction 1976 (disc
brake). Renault R5, R6. Length: 433mm. Thread: 1x male thread 3/8 x 24UNF. 1x female thread 3/8 x 24UNF. Or. No. 7700545267. Made in Europe.
R4/R5/R6, master brake cylinder, single circuit brake system. Brake system: Bendix. Suitable for
Renault R4 (R1123), to year of construction 1976. Renault R4 (R1129) from 1976 to 1978. Renault R4 F4 (R2391, R2392), of year of construction 1971 to 10/1976. R4 F6 (R2370, R2340), of year of construction 4/1975 to 10/1976. Renault R5 (0,8) from 10/1972 to 12/1984. R6 from 10/1969 to 4/1980. Piston diameter: 19,05mm. Brake line connector: 3x 3/8x24UNF. Made in Europe.
R4/R5/R6, master brake cylinder, suitable for Renault R4 to Ident No. 1109666 (vehicles with front
drum brake). Renault R5 0,8L, of year of construction 10/1972 to 08/1984. Renault R6, of year of construction 10/1969 to 04/1980. Piston diameter: 22mm. Brake line connector: 3x 3/8x24 UNF + 1x at the front side 7/16x20 UNF. The actuating piston has a bore with 11mm diameter and about 40mm deep.
R4/R5/R6, master brake cylinder, dual circuit brake system. Brake system: Bendix (drum brake
front). Suitable for Renault R4, R5, R6. Piston diameter: 20,64mm. Brake line connector: 3x M10x1 + 1x M12x1. Or. No. 7700617298 + 7701348468. Made in Europe.
R4/R5/R6, master brake cylinder. Piston diameter: 20,64mm. Suitable for Renault R4, R5, R6. Brake
line connector: 3x M10 + 1x M12. Made in Europe.
R4/R5/R6, engine suspension in front on the left. Suitable for Renault R4 (R1128, R2370, R2430), of
year of construction 1976 to 1982. R4 (R1128, R112C, E210B, 2370, R239B, RS128), starting from year of construction 1983. R5. R6, starting from year of construction 1970.
R4/R5/R6, engine suspension in front on the right. Suitable for Renault R4 (R1128, R2370, R2430)
of year of construction 1976 to 1982. R4 (R1128, R112C, R210B, R2370, R239B, RS128), starting from year of construction 1983. R5. R6, starting from year of construction 1970.
R4/R5/R6, wishbone (A-arm) on the left above. Suitable for Renault 4, from year of manufacture
1969. Renault R6. R5. Completely with ball pins + bonded-rubber bushings. Or. No. 832139900
R4/R5/R6, wishbone (A-arm) on the right above. Suitable for Renault 4, from year of manufacture
1969. Renault R6. R5. Completely with ball pins + bonded-rubber bushings. Or. No. 832140000
R4/R5/R6, wheel brake cylinder sealing set, rear. For piston diameters: 20,6mm. Brake system: Lucas
Girling. Suitable for Renault R4, R5, R6.
R4/R5/R6, wheel brake cylinder sealing set, rear. for piston diameters: 22,2mm. Brake system: Lucas
Girling. Suitable for Renault R4, R5, R6.
R4/R5/R6, bonded-rubber bushing front axle, for the inferior A-arm. Suitable for Renault R4, R5
R6. Internal dimension: 14 x 27mm. External dimensions: 45 x 40mm.
R4/R5/R6, bonded-rubber bushing front axle. Suitable for Renault R4, R5, R6. Internal dimension: 12
x 26mm. Outside diameter 36,2mm. Construction length outside: 23mm.
R4/R5/R6, tie rod completely (inclusive tie rod end). Suitable for Renault R4, starting from year
of construction 1979. Renault R5 + R6. Or. No. 7701461010. Made in Italy
R4/R5/R6, ball and socket joint down on the left, for Renault R4 + R5, R6. Installed from year of
construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701450635
R4/R5/R6, ball and socket joint down on the right, for Renault R4 + R5, R6. Installed from year of
construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No.: 7701450637
R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault
R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.
R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle
Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6, R6, Dauphine. Engine
800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.
R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for
Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/R12/R16, steering gear bonded-rubber bushing (mounting of the tie rod), steering side
Suitable for Renault R4, R5, R6, R12, R16. Inside diameter: 10mm. Construction length inside: 28mm. Outside diameter: 28mm. Construction length outside: 20mm.
R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left + on the right
fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400
R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc
(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.
R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines
C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)
R4/R5/R8, cylinder head gasket. Engine: 688, 813 (1108cc). Suitable for Renault R4 1,1L, starting
from year of construction 1978. R5, R6, R8, R8 Malor, Floride S, Estafette (R2132).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize
(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize
(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard
dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width
20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
R4/R6 FASA, water pump Renault R4 + R6 Fasa (Spanish production). For engine: 813. Cubic capacity
852cc. Attention: This water pump is only suitable for R4 + R6 from Spanish production by FASA. Important if you want to import a vehicle from Spain or Portugal.
R4/R6, brake hose rear. Suitable for Renault R3, R4, starting from year of construction 1961
Renault R5 Super, Renault R6. Length: 270 - 280mm. Thread: 2x female thread 3/8 x 24UNF. Or. No. 7701348773. Made in Europe.
R4/R6, A-arm bush set, for one side! Suitable for Renault R4 + R6. Suitable left or on the right
Contents: 3 bonded-rubber bushing, nuts, disks.
1223 Articles | Page 13 of 25
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
