Cylinder head for Citroën 2CV 2CV4

2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm. Height over everything

7,50mm. Or. No. AM124-11C

Rocker lever axle check disk, suitable for Citroen 2CV4 + 2CV6. Measurement: 19 x 14,5 x 1mm

Or.Nr. AM124-85

Manifold seal inlet, for Citroen 2CV AZAM. Inside diameter: 34mm. Diameter securement: 8,0mm

Center to center securement: 55mm. Or.Nr.: AM1412C

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Oil line for 2CV 4. (from the engine block to the cylinder heads). Reproduction. Or.Nr.: AM2213C

• Suitable for this article
• 
  Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the
  0,98 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

Valve push rod tube spring for Citroen 2CV4+6, Dyane 4/6, Mehari, AK, AMI6, AMI8.. Or. No.: 75516419

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Valve push rod tube for 2CV4 (425ccm engine). Length totally: 165mm, diameter 16mm, fit (set off)

at the cylinder head: 15mm.

Valve push rod tube for 2CV4 (435ccm engine). Length totally: 173mm, fit at the cylinder head

16mm. Or.Nr.: AZ22499

Follower tubing seal - sheet metal plates, for Citroen 2CV to year of construction 1972. Suitable

for the follower tubing seal with wide connecting post. Per piece!

Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction

10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!

• Suitable for this article
• 
  Valve push rod tube seal, for Citroen 2CV6 starting from year of construction
  1,67 €
• 
  Valve push rod tube spring for Citroen 2CV4+6, Dyane 4/6, Mehari, AK, AMI6
  2,88 €
• 
  Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are
  11,81 €

Valve push rod tube seal for Citroen 2CV (first version - from the fifties). Or.Nr.: AZ22495

Valve push rod tube seal for Citroen 2CV4 + 2CV6, of year of construction 1970 to 1978. Per piece.

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Push rod for Citroen 2CV4 + AZU, to year of construction 7/1972. 273,15mm lengthens.

Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction 1955 to 1963

Measurement: 34,8x8x77,9 mm. Or. No. A124-7A

• Suitable for this article
• 
  Exhaust valve 2CV4, 425ccm engine. Installed from year of construction 1954 to
  13,44 €

Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of construction 1964. Dimension

32,1 x 8.5 x 89mm. Or. No. AZ124-8

• Suitable for this article
• 
  Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of
  13,44 €

Exhaust valve 2CV4, 425ccm engine. Installed from year of construction 1954 to 1963. 31 x 76 x 8mm

Or. No. AZ-124-8A

• Suitable for this article
• 
  Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction
  12,79 €

Valve 2CV4, exhaust, 435cc engine. Measurement: 34x8,5x88,2. Engine: A79/1

Inlet valve for 2CV4, 435ccm engine, measure: 39x8x89,7mm

Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of construction 1964. Dimension

39 x 8 x 91mm. Or. No. AZ124-7

• Suitable for this article
• 
  Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of
  13,78 €

Valve clearance adjustment screw, suitable for Citroen 2CV6 + 4. Measurement: 7x17,5mm, overall

ll length 25mm. Or.Nr. A124-4

Valve cap from aluminum, for Citroen 2CV! These valve caps are installed on 375cc, 425cc, 435cc

engines. On the 435cc engines only a short time.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which
  3,57 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is

tightened frequently too strongly, and licks then oil.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material cork.

Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which have the valve cap

from aluminum casting.

Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made in

Germany.

• Suitable for this article
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from

silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of

construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9

Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm inside diameter, 12,55mm

outside diameter, 50,50mm long.

• Suitable for this article
• 
  Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside
  15,77 €

Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside diameter, 12,55mm

outside diameter, 45mm long.

• Suitable for this article
• 
  Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm
  15,77 €

Valve stem seal, exhaust, for Citroen AMi6, 2CV4. Inner diameter 7,5 - 8,0 mm. Inner diameter at

bottom: 10.5 mm.

Valve stem seal inlet, for AMI6, 2CV4. Inside diameter 7,8mm, outside diameter 9,9mm-13,2mm

strength 10mm. Per piece!

Valve stem seals, set (4 fittings), for Citroen 2CV6. Original Glaser. Inside diameter: 7,9 + 7,4mm.

Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts

9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.

• Suitable for this article
• 
  Spark plug thread M14 repair kit (for repairing defective spark plug threads)
  22,71 €

Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool

can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).

Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For

all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.

• Suitable for this article
• 
  Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length
  10,81 €