for Citroën 2CV Dyane
2024 Articles | Page 25 of 41
M7x50 / screw with shaft. E.g. fastening steering column to steering gear on Citroen 2CV (screw for
the steering tube clamp).
Washers corrugated M8x18 (French name. Striees). Content: 45 units. These grooved washers were
original Installed at French vehicles!
Washers corrugated M8x22 (French name: Striees). Content: 25 units. These grooved washers were
original Installed at French vehicles!
M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover screw connection on
the 11CV with D-engine. Or. No. 2372-S
M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +
Citroen DS. Measurement: M9x42mm.
M9x16, screw for the securement of the lateral cover plates at the front axle. Suitable for Citroen
2CV, all years of construction.
M9x25 / screw, tensile strength 12.9. E.g. for attaching the drive shaft to the gearbox, for
Citroen 2CV. Pitch 1.25.
Magnetic lifter flexible + washing nozzles adjustment tool. This magnet lifter can be extended up
to 592mm and is flexible at the end. Also the nut in the intake tract far behind is brought out with it again! Additionally it has a steel needle in the handle, with which washing nozzles can be adjusted.
Magnetic bowl, stainless steel bowl with magnetic base and soft rubber shell. Very useful to
collect small parts! 150 mm diameter
Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable
for all Citroen 2CV, AK, Dyane, AZU. (small + large suspension pot) property reproduction, optically like original! Or.Nr.: A434.286.
Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable
for all Citroen 2CV, AK, Dyane, AZU. (smaller + large suspension pot). This collar is from a improved rubber silicone mixture and has on the inside small splines, so that it cannot slip from the Threadet pipe. Or. No.: A434.286.
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 250mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Earth cable (battery ground strap), with battery pole clamp and eye ring. Length: 285mm. Made one
in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 300mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp ring tongue. Length: 350mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 400mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 500mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Open-end spanner - ring spanner set (8 pieces) for inch thread (1/8 - 9/16 Withworth). Many brake
parts on French classic cars often have an inch thread!
Open end wrench 46mm, for the nut from the suspension pot - threadet pipe (2186-T). Simple quality
for hobby. Suitable for Citroen 2CV. Made in Germany.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 28SCIC, 28 CIC, 34 PICS
Renault R4, R5, R6, R12 R18, Fuego for carburetor Solex 32 SEIA, 32 EISA4, 32 SEIMA. Peugeot 504, carburetor Solex 32/35 SEIEA.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 34 PICS3, Solex 40 PCIS3, 40
PICS3. 16mm plate, 8mm follower.
2024 Articles | Page 25 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
