for Citroën 2CV Dyane
2023 Articles | Page 28 of 41
Connecting rod bush for Citroen 2CV (not suitable for 2CV6). Inside diameter: 19,5mm, outside
diameter: 22,1mm, height length: 25mm
Connecting rod bush for Citroen 2CV6. Inside diameter: 20,0mm, outside diameter: 22mm, height
length: 25mm. Original No. 75420101
Positive cable (battery to starter motor). Overall length: 500mm. Cable diameter: 16mm². Made in
the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml. Eliminates tough stains and soils like
oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
Primary shaft (new), suitable for Citroen 2CV6 (disc brake). Not suitable for Citroen Dyane +
Mehari. Or. No. AM332 1E
Section rubber adhesive + covering adhesives, in a brush box 350ml. Indispensably with work on one
cover! Also premium for profile rubbers, full rubber, foam rubber, leather, lines, felt
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel brake cylinder rear, brake system DOT. Piston diameter: 17,5mm. Brake line connector: 8,0mm
Suitable for 2CV4 + 2CV6, of year of construction 11/1970 to 08/1981 (for vehicles with drum brake in front). Made in Europe.
PDF FILE 
Wheel brake cylinder rear, brake system DOT. Suitable for 2CV4 + 2CV6, of year of construction
11/1970 to 08/1981 (for vehicles with drum brake in front). Piston diameter: 17,5mm. Brake line connector: 8,0mm. Original manufacturers Valeo and/or Ferodo!
Wheel brake cylinder rear, brake system DOT. Suitable for Citroen 2CV starting from year of
construction 1967 to 1973. Piston diameter: 17,5mm. Brake line connector: 9x1,25. Or. No. AM45305A. Made in Europe.
Wheel brake cylinder rear, brake system DOT. Suitable for Citroen 2CV, of year of construction 1963
to 1967. Piston diameter: 19mm. Brake line connector: M9 x 1,25. Made in Europe.
Wheel brake cylinder rear, brake system LHM. 16mm piston. Suitable for Citroen 2CV6, starting from
year of construction 9/1981. Reproduction
Wheel brake cylinder rear, brake system LHM. Suitable for Citroen 2CV6, starting from year of
construction 9/1981. Piston diameter: 16,0mm. Brake line connector: M8x1,25. Proprietary brand STOP, Ferodo, QH. Or. No. AMN45305
Wheel brake cylinder rear. Brake system LHM. Suitable for Citroen 2CV6, starting from year of
construction 9/1981. Piston diameter: 16mm. Brake line connector: 8mm. ATE brand. We have entered the ATE wheel cylinder in our sales program because the quality level of other brands declined in the last years and we had only good practical experience with ATE brake products. Of course It costs a little bit more!
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, of year of construction
1973 to 9/1981. Piston diameter: 28,57mm. Brake line connector: 8,0mm. Original manufacturers VALEO and/or Stop. Made in Spain.
Wheel brake cylinder in front, brake system DOT. Piston diameter: 28,5mm. Brake line connector
8,0mm. Suitable for Citroen 2CV, of year of construction 1973 to 9/1981. Made in Europe.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, of year of construction
6/1967 to 1973. Piston diameter: 28,57mm (1 1/8 inch). Brake line connector: M9 x 1,25. Or.Nr.: AY453-04. Made in Europe.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, of year of construction
9/1963 to 5/1967. Piston diameter: 28,57mm (1 1/8 inch). Brake line connector: M10 x 100. Made in Spain.
Wheel brake cylinder in front, repair set. Suitable for Citroen 2CV with front drum brake. Piston
diameter: 28,57mm. Only the rubber seals are supplied!
Wheel cover from polished high-grade steel. Suitable for Citroen 2CV. The wheel cover looks like
the original Citroen wheel cover. Or.Nr. AY8541
Wheel cover polished, from high-grade steel. The wheel cover have a different design than the
original wheel covers. Suitable for Citroen 2CV. "The blue protective coating is very easy to peel off with hot water!
Wheel cover set completely for 4 rims. Suitable for Citroen 2CV. Consisting of: 4 wheel cover
(original shape). 4 wheel cover screw from high-grade steel. 4x box nut. Only sutiable with short wheel nuts.
Wheel cover set completely, consisting of 4x wheel covers, 4x wheel cover screw, 4 x box nut)
Suitable for Citroen 2CV. Note: The wheel covers can only fit, if you have short wheel nuts!
Wheel cover screw from high-grade steel, for Citroen 2CV. Original Citroen. Better treats with than
our No. 16812. Thread M 10 x 13mm, for wrench 19mm.
Wheel cover screw washer from synthetic, M10, for Citroen 2CV. These disks were in former times
original under the screw and prevent scratches and contact corrosion! Per piece.
Wheel bearing for Citroen 2CV. The wheel bearings are in front and rear identically constructed
Suitable for all years of construction! Good own reproduction! Dimension: 35 x 72 x 27mm.
Wheel bearing for Citroen 2CV. Original manufacturer "SNR". The wheel bearings are identical at the
front and rear. Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear (Incl. oil seal + grease cap). Original manufacturer "SNR
Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear. (inclusive shaft seal + grease cap). Suitable for all
years of construction. Brand manufacturers. Dimension: 35 x 72 x 27mm.
Wheel bearing set for Citroen 2CV, front (incl. oil seals + split pin). Original manufacturer
SNR". Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, in front. (inclusive shaft seals). Suitable for all years of
construction. Brand manufacturers. Dimension: 35 x 72 x 27mm. Good substitute product to SKF bearings.
Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi
professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically
constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
Wheel nut short, galvanized, suitable for Citroen 2CV, Dyane, Mehari, AMI. Measurement: M12 x 1,25
Is suitable up to 45 NM torque (2CV). Please lubrify before mounting. Replica
2023 Articles | Page 28 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
