for Citroën 2CV Dyane

Wheel hub - front wheel bearing housing (mounting for wheel bearing and kingpin). Reproduction

Suitable for left or right. The wheel hub can be fitted to all 2CV6 + 2CV4 and Dyane models with a 72 mm wheel bearing (i.e. not for AK, ACDY, etc.). The wheel hub has no mount for vibration dampers (as on old 2CVs). Or. No. 5502003

Tyre R125/15, reproduction tyre. The tyre looks similar to the Michelin profile. The tyres have a

protective edge on both sides (against kerbs!) and an additional M+S marking (tyres with M+S marking may also be used in winter on vehicles manufactured before 1990). Suitable for Citroen 2CV. The tyre is a low-cost alternative. However, the durability of the tyre cannot be compared to Michelin! Tyre pressure 2CV: Front 1.4 bar! Rear 1.8 bar!

Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane

AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.

Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for

Citroen 2CV6, Dyane, Mehari. The belt pulley has been rotated from a 18kg steel block DIN 1,0501 (AISI/SAE 1040, EN C35). Fine balanced pulley, thus avoiding much pressure on the crankshaft. No risk of tearing off as it is not welded. Belt pulley is yellow galvanised (like original). Made by Franzose/Cipere, entire production process in Europe.

Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of

a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).

Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were

e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.

Back-up light reproduction (Hella), the housing is made of plastic. Width 120mm, height of 70mm

The headlamp is for a later mounting underneath the bumper! It cannot be used as substitute for the original backup lights from R4! Lampholder for the bulb: Ba15s. Maximum 21Watt. (Our number 14035 + 14045).

Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real

improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).