for Citroën 2CV Dyane
2033 Articles | Page 3 of 41
Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
bended at the end. So it`s easy to mount. Made in Germany.
Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm
Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.
Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor
quality. Tightening torque: 343-392Nm.
Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening
torque: 343-392Nm. Original Citroen! The better choice.
Kingpin spacer disc set. Consisting of: 3x spacer disc (2.0 + 2.3 + 2.5mm), 1x metal top to hammer
in, 1x dust plate. Made in Europe
Kingpin oversize (17,08mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,08mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,041 > 17,07mm (with a reamer, according to ISO 286-2! Made by Franzose/CiPeRe
Kingpin oversize (17,12mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,12mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,081 > 17,11mm (with a reamer, according to ISO 286-2)! Made by Franzose/CiPeRe
Kingpins (original), complete with sleeves and washers (2.0 + 2.0mm). Per side. Suitable for all
years of construction! Original Citroen, not a reproduction.
Kingpin for Citroen 2CV, complete with all sleeves and washers (2,0 + 3,0 + 3,0mm). Steel version
Per side. Suitable for all years of construction! Excellent reproduction, our recommendation!
Kingpin for Citroen 2CV, with alloyed bushes. Complete with all sleeves and spacers (2,0 + 2,0 +
2,5mm). Per side. Suitable for all years of construction.
Kingpin reamer (hobby tool) (quick adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Adjustment
range: 17.0mm - 19.0mm. Receptacle: square. With this tool the swing arm and the bushings of the hub can be reamed to the exact size. This reamer is a "hobby tool". The quality should be sufficient for one-time use. We also have a professional tool under no. 12393 in our programme.
Kingpin reamer (fast adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Range of adjustment: 15,5mm
18,0mm (39/64 45/64 inch). Cutting material: HSS. Gumption length: 60mm. Mounting: Square. Professional tool. With this tools the radius arm and the hub can be reamed on the accurate measurement.
King Pin tool, manual pressing version . Suitable for 2CV, Dyane, Mehari, Ami. Made by Franzose. An
improved reconstruction of the genuine Citroen tool 1858-T resp. MR. 630-22/14. This tool has two different pressure pieces. So you are able to press out/press in the original and the rebuilt king pins, which had different diameters/guides of the full length inner hole. This tool is able to resist a torque of 200 Newton meter. If there is no movement of the king pin until 200 Nm, you have to dismantle the complete pivot arm and have to press out the king pin with a hydraulic press. For correct use of this tool please have a look into the original Citroen workshop manual.
Adapter cable for classical radios. From DIN connection on 3,5mm cinch. So, you can connected very
simply MP3 player, Smartphones etc. Suitable for all classical Blaupunkt radios supplied by us.
AMI6/AZU/DYANE, front muffler round, under the engine. Installed in Citroen AZU to 07/1972, Dyane
until 1969, AMI6. 1x round inlet, 1x round outlet. Or.Nr.: AK1821A
Tow trailer coupling for Citroen 2CV, Dyane. the coupling is delivered with ECE approval! Caution
there are many tow trailers couplings on the market, which do not have any permission! Trailer load by 2CV: 270 kg unbraked, 400 kg braked, 30 kg of trailer hitch tongue load. The electrical set is to be ordered separately! (14115)
PDF FILE 
High-performance universal starter motor! This starter motor can be installed in 20 positions
thanks to its rotating mounting plate. This means it can be adapted to 2CV4, Dyane4, AZU250, AMI6. 12 volt, 1.4KW. The pinion has 11 teeth. This high-performance starter motor has an intermediate gearbox. As a result, it has approx. twice the performance of a standard starter motor with half the power consumption and only 3.8kg weight!
Super Duty starter (2KW!). Suitable for Citroen 2CV6, AK, Dyane, Mehari, AMI8 This high performance
starter has an intermediate gearbox. As a result, it has approx. twice the performance of a standard starter motor with half the power consumption and only 3.8kg weight! This starter is the most extreme version that can be installed in a 2CV. Output 2KW (2.72 HP), with double the torque thanks to its reduction gear! It also revs the most highly tuned engine (motorsport).
Starter motor, suitable for Citroen 2CV6. New part! 9 teeth. 12 V. Installed from year of
construction 1982 to 1990. Caution, only suitable for vehicles starting from year of construction 1982. (narrow fly wheel). Old part return not necessarily! High quality!
Starter motor 2CV6, in the exchange. 9 teeth. 12 V. Installed from 1972 to 1990. Old part return
necessarily. Old part deposit 50 Euro. Original manufacturer Valeo!
Starter brushes Paris Rhone, for starter motor series D8E74, D8E116, D8E99. Suitable for Renault
R4, R5, R16, Renault with rear engines. Citroen 2CV, Dyane. Wide one: 15mm. Amount: 14mm. Deep one: 7mm.
Starter brushes, Citroen 2CV6 + 2CV4. Suitable for starter motor manufacturer Iskra + Bosch. 12 V
Wide one: 17mm. Height: 19mm. Strength: 8mm.
Starter brushes, for Ducellier starter motor (USX 91-92). Suitable for Citroen 2CV. Trapezoidally
Height: 13mm. Wide one: 15mm. The trapezoid has a wide of 11,3mm in the cross section (above), down 7mm.
Anti-slide mat 120 x 100cm (Luggage compartment mat). Individually cutable. Nothing slips in curves
or by brake; anti-slide-coats on both sides. For car, boat, caravan
Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV, Dyane, AK, AZU, Mehari, on which
the drive shaft flange is fixed with 4 screws (always vehicles with drum brake). All 2CV, Dyane... with 6 bolts (drum brake + disc brake) need the oil seal 12089. Dimension: 32 x 50 x 10mm. Made in Germany.
Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV6 + 2CV4, Dayne, AK, Mehari, on which
the drive shaft flange is fixed with 6 bolts (i.e. all vehicles with disc brakes and the latest model years with drum brakes). Vehicles with 4 bolts need the oil seal 12294. Size: 31 x 42 x 8mm. Made in Germany.
Drive shaft 2CV6 wheel side. Suitable for Citroen 2CV6 to year of construction 1990. New part
Manufacturer SKF. No old part return necessarily. The best choice! Overall length: 440mm
Drive shaft wheel side! Suitable for Citroen 2CV6 to year of construction 1990. New part
Reproduction. Overall length: 445mm.
Drive shaft gearbox side. Suitable for Citroen 2CV6 to year of construction 1990. New part! Old
part return not necessarily! Note: Please grease the joint before mounting (for it the sheet metal lid dismantle)!
Drive shaft crown nut, suitable for Citroen 2CV + Citroen GS. Reproduction. Tightening torque
e: 343-392Nm. Or. No.: A-416-8/5420543
Collar drive shaft gearbox side (without lubricating grease, without clips). Suitable for Citroen
2CV4 + 2CV6. Installed to year of construction 1990.
2033 Articles | Page 3 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
