Shock absorber rear, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer Boge
Sachs! The Boge Sachs shock absorber is very soft!
for Citroën 2CV Dyane
2020 Articles | Page 36 of 41
Shock absorber in front, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer
Boge Sachs! The Boge Sachs shock absorber is very soft!
Shock absorber pin - washer, medium version. Suitable for Citroen 2CV with 12mm shock absorber pin
Measurement: 12,5 x 35 x 5mm.
26 long nut, for the original shock absorber pin. Suitable for Citroen 2CV. Original one, our shock
absorber pin 12066 is fastened with a 27mm key!
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm diameter. For 26mm tool
mounting. Bad reproduction.
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm thread diameter for the
shock absorber. Made in Germany, from high-strength steel.
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
h rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction
Follower tubing seal - sheet metal plates, for Citroen 2CV to year of construction 1972. Suitable
for the follower tubing seal with wide connecting post. Per piece!
Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!
Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are made from an
improved material, making them significantly more durable.
Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piece
Manufacturer original "GLASER".
Bumper rear wide, suitable for Citroen 2CV + Dyane. Reproduction from high-grade steel, without
adhesive strips! Our bumper 16514 is high polish! Made in Europe.
Bumper rear for Citroen 2CV (Dyane), out polished high-grade steel. Particularly for 2CV
manufactured. (High version). The bumper is manufactured into complex manual work and is polished then about 3 hours!
Bumper adhesive strip wide (black). Bumper rear, for 11cm high bumpers. Suitable for Citroen 2CV
V, Installed of year of construction 09/1974 to 07/1990. Made in Germany
Bumpers rubber grey rear, for Citroen 2CV. This rubber was mounted starting from 1963 to about 1975
instead of black adhesive strips and fits only on the low (7,6cm) high bumper.
Bumpers rubber black rear, for Citroen 2CV. This rubber was mounted starting from 1963 to about
1975 instead of black adhesive strips and fits only on the low (7,6cm) high bumper.
Bumpers rubber black, in front. For Citroen 2CV. This rubber was mounted starting from 1963 to
1975, instead of black adhesive strips.
Bumper mounting bracket rear from high-grade steel, for Citroen 2CV6 + 4. The bracket is for the
high bumper. Installed from 09/1974 to 07/1990. Made in Germany.
Bumper mounting bracket rear for Citroen 2CV6 + 4. The bracket is for the high bumper. Installed
from 09/1974 to 07/1990. Electrolytically galvanized! Made in Europe.
Bumper mounting bracket rear, for Citroen 2CV6 + 4. The bracket is for the low (9cm) bumper
Installed from 1963 to 09/1974. Made in Europe.
Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied with M7 nut and
washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Per piece! The screw is also installed in the Citroen AMI6. It is located on the side of the front fender and is screwed to the front mask.
Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied without nut and
washer (reproduction). Suitable for the front (2x) and rear (4x) bumpers. M7 thread, cross recess! Per piece.
Speedometer cable for Citroen 2CV, Dyane to year of construction 1979, Citroen C32-C35. Length
about 900mm. Made in France.
Speedometer cables bush (guide speedometer cable) in the gearbox, suitable for 2CV old + 2CV4
Reproduction. (The speedometer cable is held with a clip in the gearbox). Not suitable for 2CV6.
2CV6, speedometer pinion in gearbox. 16 theeth! The pinion has an outside diameter of 20,7mm, the
shank has a diameter of 8mm.
PDF FILE Fuel filler cap chromium-plates, lockable! Suitable for Citroen 2CV Dyane, DS, HY! For better rust
protection please put regularly some oil on it.
Tank cap chrome-plated, lockable. Reproduction of the original. Suitable for 2CV/DS/11/HY/AK
Before you use the lock, please lubricate it! Note: Close and open the fuel filler cap only by a 1/4 turn! Otherwise the locking teeth can be damaged.
VIDEO Chrome-plated fuel cap, non-lockable. (Metal). Suitable for 2CV, Dyane, AMI, HY, DS. The fuel caps
are really well made. They also have a fuel vent, of course. Considering the price and quality, we highly recommend them.
2020 Articles | Page 36 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
