for Citroën 2CV Mehari
1648 Articles | Page 13 of 33
Rubber stop at the suspension pot (for small suspension pot). Suitable for all Citroen 2CV
starting from year of construction 1955. Or. No. A435-1b. That is only the rubber, without metal plates!
- Suitable for this article
Rubber stop distance disk (for the rubber stop of the front axle at the chassis). Suitable for
Citroen 2CV. Reproduction from high-grade steel. Made in Germany. Thickness: 1,0mm
Rubber stop for the front axle (small, round version), mounts laterally at the chassis. Suitable
for Citroen 2CV, AK, ACDY. Thread: M7 x 22. Diameter: 35mm. Height: 23mm.
Rubber stop for the front axle, mounts laterally at the chassis. Suitable for Citroen 2CV, AK
ACDY. The suitable nut has the number 12120. Made by Franzose/CiPeRe in Europe.
Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen 2CV4
2CV6. Reproduction, good quality. Made by Franzose/CiPeRe in Europe. We have now had the rubber stop made ourselves, as the quality has deteriorated in recent years. We have only cast the metal plate firmly with the rubber so that the weak point of water (rust) penetrating between the rubber and the metal plate can no longer occur.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be
missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.
Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing
Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc
Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.
Locking spring on the left (brake caliper), for the parking brake pad. Suitable for Citroen 2CV
starting from year of construction 1981.
Locking spring on the right (brake caliper), for the parking brake pads. Suitable for Citroen 2CV
starting from year of construction 1981.
Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV
Dyane, AMI, AK, AZU, ACDY.
Fixing clip for the gasoline line. (large version, 6mm). Suitable for our chassis "Made in
n Germany". Not suitable for the original chassis.
Fixing clip for the brake pipe. (small version, 4mm). Suitable for our chassis "Made in Germany
Not suitable for the original chassis.
Handbrake lever (handle) repair kit. Suitable for Citroen 2CV6 + 2CV4. The repair kit consists of
the push button (to unlock) and the push rod.
Hand brake handle tension spring. Mounted between hand brake handles at the chassis and the
chassis. Suitable for Citroen 2CV with front drum brake. (to year of construction 1981). Or.Nr.: A454 9
Hand brake cable adjusting nut (butterfly nut). Suitable for Citroen 2CV with front drum brake
Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV, of year of construction 1966 to 1981
Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable on the left (long cable). Suitable for Citroen 2CV, Dyane, Mehari. Vehicles with
disc brake in front. Length: 675mm.
Hand brake cable on the left (short cable). Suitable for Citroen 2CV, Dyane, Mehari. Vehicles with
disc brake in front. Length: 555mm.
Hand brake cable mounting in front on the left. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder)
Suitable for Citroen 2CV.
Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circuit
brake system (DOT + LHM). Very good reproduction, from foam rubber. Or. No. AM453-211. Made in Germany.
Master brake cylinder rubber seal (1 pair, green dyed)) for the brake fluid reservoir. Brake system
LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder rubber seal (per piece) for the brake fluid reservoir. Brake system LHM. Dual
circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder repair set, brake system LHM. Dual circuit brake system. Suitable for Citroen
2CV6 starting from year of construction 9/1981. The repair set contains all sealing rubbers. For piston diameters: 17,5mm.
Master brake cylinder repair set. Brake system DOT. Dual circuit brake system. Suitable for Citroen
2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.
Master brake cylinder push rod (adjustable). Length: 88mm. Mounted between brake pedal and master
brake cylinder. Suitable for Citroen 2CV with hanging pedals.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.
Master brake cylinder, brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV, of
year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.
Master brake cylinder, brake system DOT. Dual circuit brake system. Piston diameter: 20,6mm. Brake
line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.
Master brake cylinder, brake system LHM. Dual circuit brake system. Suitable for Citroen Mehari
Acadiane + AMI8 (vehicles with disc brake in front). Piston diameter: 17,5mm. Brake line connector: 2x M10x1. Reproduction.
Master brake cylinder, LHM brake system. Dual circuit brake system. Brand manufacturer! Suitable
for Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brake). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Master brake cylinder, LHM brake system. Dual circuit brake system. Reproduction. Suitable for
Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brakes). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Made in Europe. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Main cable harness, suitable for Citroen Mehari, starting from year of construction 09/1974 to
07/1981. Made in Germany.
1648 Articles | Page 13 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
