for Citroën 2CV Mehari
1648 Articles | Page 29 of 33
Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order to
repair the tie rod end inside. High quality. Suitable for all Citroen 2CV, AK, Dyane, AMI.
Spring in the tie rod end. Suitable for Citroen 2CV. Per side 1x spring is required.
- Suitable for this article
Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This
collar is produced in Europe for "Der Franzose". The collar is very flexible and can be mounted over the complete tie rod end, without it tears. Better than original!
Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
suitable for Citroen, Peugeot, Renault.
Stud bolt M7 on top of the gearbox (gearbox cover). The stud bolt secures the brake line to the
gearbox cover. Suitable for Citroen 2CV6, Dyane 6, Mehari, ACDY. Thread: M7. Total length: 50 mm. Thread length above the 11 mm head: 13 mm. Thread length below the head: 30 mm.
Stud bolt M8 x 35. For the securement of the carburetor on the intake manifold. Suitable for
Citroen 2CV6 + 2CV4. (round + oval carburetor). Or. No. 26 161 509
Stop sleeve for the clutch cable (2CV to year of construction 1967, with diagonal clutch release
fork lever) and for the hand brake cables drum brake. Or. No. A454-76.
Shock absorber (2 fittings) in the rear, for Citroen 2CV + Dyane. For 12mm shock absorber
securement. Manufacturer "Record France". Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Air in the shock absorber is removed! These shock absorbers are oil pressure shock absorbers are soft. Just as the 2CV was originally delivered.
Shock absorber (2 fittings) in front, for Citroen 2CV + Dyane. For 12mm shock absorber securement
Manufacturer "Record France". Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Air in the shock absorber is removed! Length compressed: 340mm. Extended: 500mm. These shock absorbers are oil pressure shock absorbers are soft. Just as the 2CV was originally delivered.
Shock absorber rear, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer Boge
Sachs! The Boge Sachs shock absorber is very soft!
Shock absorber in front, suitable for Citroen 2CV (per piece). 12mm securement eye. Manufacturer
Boge Sachs! The Boge Sachs shock absorber is very soft!
Shock absorber pin - washer, medium version. Suitable for Citroen 2CV with 12mm shock absorber pin
Measurement: 12,5 x 35 x 5mm.
26 long nut, for the original shock absorber pin. Suitable for Citroen 2CV. Original one, our shock
absorber pin 12066 is fastened with a 27mm key!
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm diameter. For 26mm tool
mounting. Bad reproduction.
Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm thread diameter for the
shock absorber. Made in Germany, from high-strength steel.
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.
Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push
h rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction
Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction
10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!
Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are made from an
improved material, making them significantly more durable.
Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piece
Manufacturer original "GLASER".
Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied with M7 nut and
washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Per piece! The screw is also installed in the Citroen AMI6. It is located on the side of the front fender and is screwed to the front mask.
Speedometer small: Mounting base (plastic spacer base in grey) between speedometer and dashboard
Suitable for small speedometers with 6 + 12 volt. Citroen 2CV + Mehari. Or. No. AZ521-20
Speedometer cable for Citroen 2CV, Dyane to year of construction 1979, Citroen C32-C35. Length
about 900mm. Made in France.
1648 Articles | Page 29 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
