crankshaft-camshaft-piston-flywheel for Citroën 2CV R4
70 Articles | Page 1 of 2
R4/4CV, piston ring set (engine 680). Suitable for Renault R4, of year of construction 1963 to
1967. Renault 4CV, Dauphine. Bore: 54,5mm. Heavy one: 2,0mm + 2,0mm + 3,5mm. Set for 4 pistons.
4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of
construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 2,0mm + 3,5mm.
4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of
construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 3,5mm + 3,5mm.
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following
Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.
R4 Fasa (Spain), piston + cylinder (4 pieces). Engine: 813.02. Cylinder capacity: 852ccm. Suitable
for Renault R4 (Fasa), 4L, Fourgonnette, Super. All from 1968 onwards. bore: 61,40mm. Piston pin: 18 x 53,80mm. Piston rings: 2,0 + 2,0 + 3,5mm. Outside diameter bottom: 75,50mm. Outer diameter top: 85,75mm. Total height: 132,50mm. This engine was assembled in Spanish Renault R4 (Fasa)!
R4, camshaft for 845cc engine. Engine type: B1B. From 1984 onwards, this camshaft was only
installed in Renault R4 (R1123 + R2106) models with 845cc engines (engine code: B1B). Part no. 04 28 443 300. These camshafts are original NOS spare parts (new old stock).
R4, Camshaft gear wheel (steel). Suitable for Renault R4 (early years of construction). Engine
680-02 to engine number 363854. Engine: 800-01 to engine number 207836. 34 teeth. Inside diameter: 28mm. Outside diameter: 99,9mm.
R4, cam follower (hollow version). Suitable for Renault R4. Engine: 845cc + 1108cc. Motor types
C1E, 688 (GTL), B1B, 800 (L, TL). Diameter: 19,0mm. Or. No. 7700529305 + 7700690122
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner
diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension
Inner diameter 44mm, outer diameter 55,6mm, 1,9mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to
41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).
R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5
800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182
R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 35 teeth. Inside diameter
35,75mm. Outside diameter: 100,06mm.
R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1123, R1124, R2104, R2106), of year of
construction 1969 to 1986. Renault R5L + R6. Engine: 800 B1B, 800 10 02/03/01/05. Engine capacity: 845cc. Compression: 8: 1. Piston pin: 16 x 49mm. Piston rings 2,0/2,0/3,5. Outside diameter down: 62,50mm. Outside diameter above: 69,80mm. Height totally: 126,0mm. Mounting with paper seal for the liners (no copper seal)
R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1126, 2109, 2392). R5 (R1220). Engine
839. Engine capacity: 782cm ³. Bore: 55,80mm. Piston pin: 16 x 46mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5, piston + liner (4 item). Suitable for Renault R4 + R5. Engine: 689.10. C1C. 956cc (37
44HP). Bore: 65mm. Piston pin: 18 x 57mm. Piston rings: 1,75 + 2.0 + 3,5mm. Outside diameter down: 75,50mm. Outside diameter above: 85,80mm. Height totally: 135,0mm
R4/R5, piston rings, for 1 piston. Suitable for Renault R4 + R5. Bore: 65,0mm. Engine capacity
956cc. Piston rings: 1,75 + 2.0 + 3,5mm.
Camshaft drive chain, 64 chain links (simplex chain). Suitable for Renault R4, R5, R6, R8, R12
TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700.
R4/R5, Gear wheel for the crankshaft, 19 teeth. Suitable for Renault R4 + R5. Engines: 782cc +
845cc. Installed from 10/1962 to 07/1989. Outside diameter: 61mm. Inside diameter: 25mm. Amount: 26mm. Or. No. 7701348994. Original supplier.
Gear camshaft. 34 teeth. Suitable for Renault R4, R5. Note: The gear has centrically in the
mounting a pin! Engines 1108cc + 956cc. Installed by the R4 from 06/1978 to 06/1990. By R5 from 01/1972 to 12/1985. Or.Nr. 7700655335
R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, from 1975 onwards. Engines Renault
688.02/10/11,688, C1E (1108ccm). Standard dimension
Gear camshaft, 34 teeth. Suitable for Renault R4, R5, R10. 845ccm, 1108ccm, 1289ccm. Note: The
mounting centrically has a projection!
R4/R5/R12, gear rim fly wheel. 117 teeth. Suitable for Renault R4, R5, R12. Inside diameter
22,2cm. Outside diameter: 24,7cm. Thickness: 0,8cm.
R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault
R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.
R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle
Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6, R6, Dauphine. Engine
800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.
R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for
Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc
(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.
R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines
C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)
Gear crankshaft, 17 teeth, suitable for Renault R4, R5, R8, R10. Engines 956cc, 1108cc, 1289cc
Installed from 11/1962 to 06/1990. Or. No. 7700564247.
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize
(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize
(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard
dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
70 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
