Protection plate for the engine, for the original chassis. Suitable for Citroen 2CV, AK400, Mehari
This extremely heavy sheet metal is an accurate reproduction of the original protection plate, which was offered by Citroen. Made in Germany.
for Citroën 2CValt
1707 Articles | Page 33 of 35
Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction 1955 to 1963
Measurement: 34,8x8x77,9 mm. Or. No. A124-7A
Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of construction 1964. Dimension
32,1 x 8.5 x 89mm. Or. No. AZ124-8
Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of construction 1964. Dimension
39 x 8 x 91mm. Or. No. AZ124-7
Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8
R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.
Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover
(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.
Valve cap from aluminum, for Citroen 2CV! These valve caps are installed on 375cc, 425cc, 435cc
engines. On the 435cc engines only a short time.
Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains
pre-grinding paste (rough) and regrinding paste (fine).
- Suitable for this article
Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of
construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9
Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8,50mm inside diameter, 12,55mm
outside diameter, 49mm long.
Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm inside diameter, 12,55mm
outside diameter, 50,50mm long.
Valve guide exhaust for 2CV-AZL, AZU. Installed from 1949 to 1966. 8mm inside diameter, 12mm
outside diameter, 40mm long.
Valve guide inlet for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8mm inside diameter, 12,55mm
outside diameter, 53mm long.
Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside diameter, 12,55mm
outside diameter, 45mm long.
Valve spring cotter for Citroen 2CV to year of construction 1963. Suitable for inlet + exhaust
valve. Per valve 2 valve spring cotters are required. Or.Nr. AZ124-18
Valve stem seal inlet, for AMI6, 2CV4. Inside diameter 7,8mm, outside diameter 9,9mm-13,2mm
strength 10mm. Per piece!
Carburetor sealing set for Citroen 2CV starting from year of construction 1949. Engines with 375 +
425 cc capacity. Carburetor SOLEX 28IBC.
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 125
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 135
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 150
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 155
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 160
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 170
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 175
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor, distance plate. Installed in Citroen 2CV with 375 + 425cc with round
carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98
Latching pin, which is inserted from above into the medium seat slide. Suitable for Citroen 2CV. It
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable
for Citroen 2CV. Or.Nr.A44295
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
1707 Articles | Page 33 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
