Wheel brake cylinder rear, brake system DOT. Suitable for Citroen 2CV starting from year of
construction 1967 to 1973. Piston diameter: 17,5mm. Brake line connector: 9x1,25. Or. No. AM45305A. Made in Europe.
for Citroën 2CValt
1703 Articles | Page 26 of 35
PDF FILE 
Wheel brake cylinder rear, brake system DOT. Suitable for Citroen 2CV, to year of construction
1963. Piston diameter: 19mm. Brake line connector: M10 x 1.
Wheel brake cylinder rear, brake system DOT. Suitable for Citroen 2CV, of year of construction 1963
to 1967. Piston diameter: 19mm. Brake line connector: M9 x 1,25. Made in Europe.
Wheel brake cylinder rear, repair set (without pistons). Brake system DOT. Suitable for Citroen
2CV, AKS, AZU. For piston diameters: 19mm.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, to year of construction
1963. Piston diameter: 25,4mm (1 inch). Brake line connector: M10 x 100. Made in Europe.
Wheel brake cylinder in front, brake system DOT. Piston diameter: 28,5mm. Brake line connector
8,0mm. Suitable for Citroen 2CV, of year of construction 1973 to 9/1981. Made in Europe.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, of year of construction
6/1967 to 1973. Piston diameter: 28,57mm (1 1/8 inch). Brake line connector: M9 x 1,25. Or.Nr.: AY453-04. Made in Europe.
Wheel brake cylinder in front, brake system DOT. Suitable for Citroen 2CV, of year of construction
9/1963 to 5/1967. Piston diameter: 28,57mm (1 1/8 inch). Brake line connector: M10 x 100. Made in Spain.
Wheel brake cylinder in front, repair set. Suitable for Citroen 2CV with front drum brake. Piston
diameter: 28,57mm. Only the rubber seals are supplied!
Wheel cover from polished high-grade steel. Suitable for Citroen 2CV. The wheel cover looks like
the original Citroen wheel cover. Or.Nr. AY8541
Wheel cover set completely, consisting of 4x wheel covers, 4x wheel cover screw, 4 x box nut)
Suitable for Citroen 2CV. Note: The wheel covers can only fit, if you have short wheel nuts!
Wheel cover screw from high-grade steel, for Citroen 2CV. Original Citroen. Better treats with than
our No. 16812. Thread M 10 x 13mm, for wrench 19mm.
Wheel cover screw washer from synthetic, M10, for Citroen 2CV. These disks were in former times
original under the screw and prevent scratches and contact corrosion! Per piece.
Wheel bearing for Citroen 2CV. The wheel bearings are in front and rear identically constructed
Suitable for all years of construction! Good own reproduction! Dimension: 35 x 72 x 27mm.
Wheel bearing for Citroen 2CV. Original manufacturer "SNR". The wheel bearings are identical at the
front and rear. Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear (Incl. oil seal + grease cap). Original manufacturer "SNR
Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear. (inclusive shaft seal + grease cap). Suitable for all
years of construction. Brand manufacturers. Dimension: 35 x 72 x 27mm.
Wheel bearing set for Citroen 2CV, front (incl. oil seals + split pin). Original manufacturer
SNR". Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, in front. (inclusive shaft seals). Suitable for all years of
construction. Brand manufacturers. Dimension: 35 x 72 x 27mm. Good substitute product to SKF bearings.
Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi
professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically
constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
Wheel nut short, galvanized, suitable for Citroen 2CV, Dyane, Mehari, AMI. Measurement: M12 x 1,25
Is suitable up to 45 NM torque (2CV). Please lubrify before mounting. Replica
Wheel nut long, galvanizes, suitable for Citroen 2CV. Measurement: M12 x 1,25. Tightening torque
40-50 nm. Caution: hub caps cannot be used with short wheel nut`s!
Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (where
the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!
Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum
Very good workshop quality!
Wheel plate (wheel hub) in front. Suitable for Citroen 2CV from + the fifties + sixties. 8 teeth
for the drive shaft mounting.
Chassis reinforcement set for the original chassis of Citroen 2CV. These sheet metals are welded
outside, behind the front axle. Made in Germany.
Friction lining in the suspension pot (small suspension pot). Without metal plate. Material
Synthetic. The friction lining is riveted on the metal plate. Suitable for Citroen 2CV.
Friction shock absorber (complete with cap, rubber cap), at the front axle. Suitable for Citroen
2CV starting from year of construction 1955. Reproduction.
Friction shock absorber sheet metal plate (the lower, to the radius arm indicating). Suitable for
Citroen 2CV. Or.Nr.: AM43682
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire 155R400X TT83S (X - profile). Manufacturer Michelin. Suitable for Citroen 2CV Sahara. Citroen
DS on the rear axle (fifties - at the beginning of sixties). Peugeot 203, Renault Juvaquatre
Tyre R125/15, reproduction tyre. The tyre looks similar to the Michelin profile. The tyres have a
protective edge on both sides (against kerbs!) and an additional M+S marking (tyres with M+S marking may also be used in winter on vehicles manufactured before 1990). Suitable for Citroen 2CV. The tyre is a low-cost alternative. However, the durability of the tyre cannot be compared to Michelin! Tyre pressure 2CV: Front 1.4 bar! Rear 1.8 bar!
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane
AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.
Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for
Citroen 2CV6, Dyane, Mehari. The belt pulley has been rotated from a 18kg steel block DIN 1,0501 (AISI/SAE 1040, EN C35). Fine balanced pulley, thus avoiding much pressure on the crankshaft. No risk of tearing off as it is not welded. Belt pulley is yellow galvanised (like original). Made by Franzose/Cipere, entire production process in Europe.
Screw, for the securement of the belt pulley, on the crankshaft. Suitable for Citroen 2CV 16 HP
not fitting for 2CV6! Or.Nr. A24195
Ring nut suitable for the wheel bearing, for 2CV. (Not suitable for AK, ACDY, AMI). Very properly
matching reproduction. Dimension: M74 x 1,5. Tightening torque: 343-392Nm. Made by "Franzose"
1703 Articles | Page 26 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
