for Citroën 2CValt
1703 Articles | Page 8 of 35
Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
bended at the end. So it`s easy to mount. Made in Germany.
Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm
Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.
Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor
quality. Tightening torque: 343-392Nm.
Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening
torque: 343-392Nm. Original Citroen! The better choice.
Kingpin spacer disc set. Consisting of: 3x spacer disc (2.0 + 2.3 + 2.5mm), 1x metal top to hammer
in, 1x dust plate. Made in Europe
Kingpin oversize (17,08mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,08mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,041 > 17,07mm (with a reamer, according to ISO 286-2! Made by Franzose/CiPeRe
Kingpin oversize (17,12mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,12mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,081 > 17,11mm (with a reamer, according to ISO 286-2)! Made by Franzose/CiPeRe
Kingpins (original), complete with sleeves and washers (2.0 + 2.0mm). Per side. Suitable for all
years of construction! Original Citroen, not a reproduction.
Kingpin for Citroen 2CV, complete with all sleeves and washers (2,0 + 3,0 + 3,0mm). Steel version
Per side. Suitable for all years of construction! Excellent reproduction, our recommendation!
Kingpin for Citroen 2CV, with alloyed bushes. Complete with all sleeves and spacers (2,0 + 2,0 +
2,5mm). Per side. Suitable for all years of construction.
Kingpin reamer (hobby tool) (quick adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Adjustment
range: 17.0mm - 19.0mm. Receptacle: square. With this tool the swing arm and the bushings of the hub can be reamed to the exact size. This reamer is a "hobby tool". The quality should be sufficient for one-time use. We also have a professional tool under no. 12393 in our programme.
Kingpin reamer (fast adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Range of adjustment: 15,5mm
18,0mm (39/64 45/64 inch). Cutting material: HSS. Gumption length: 60mm. Mounting: Square. Professional tool. With this tools the radius arm and the hub can be reamed on the accurate measurement.
King Pin tool, manual pressing version . Suitable for 2CV, Dyane, Mehari, Ami. Made by Franzose. An
improved reconstruction of the genuine Citroen tool 1858-T resp. MR. 630-22/14. This tool has two different pressure pieces. So you are able to press out/press in the original and the rebuilt king pins, which had different diameters/guides of the full length inner hole. This tool is able to resist a torque of 200 Newton meter. If there is no movement of the king pin until 200 Nm, you have to dismantle the complete pivot arm and have to press out the king pin with a hydraulic press. For correct use of this tool please have a look into the original Citroen workshop manual.
Adapter cable for classical radios. From DIN connection on 3,5mm cinch. So, you can connected very
simply MP3 player, Smartphones etc. Suitable for all classical Blaupunkt radios supplied by us.
AMI6/AZU/DYANE, front muffler round, under the engine. Installed in Citroen AZU to 07/1972, Dyane
until 1969, AMI6. 1x round inlet, 1x round outlet. Or.Nr.: AK1821A
Tow trailer coupling for Citroen 2CV, Dyane. the coupling is delivered with ECE approval! Caution
there are many tow trailers couplings on the market, which do not have any permission! Trailer load by 2CV: 270 kg unbraked, 400 kg braked, 30 kg of trailer hitch tongue load. The electrical set is to be ordered separately! (14115)
PDF FILE 
Starter motor 2CV old, 6 V, old version with Bowden cable. The starter button lever indicates to
the left (when the starter is mounted). In the exchange, Old part deposit 150 euros.
Starter brushes, for Ducellier 6 V + 12 V. Suitable for Citroen AMI6 + AK to year of construction
1966 (6 V, A533-15). Citroen HY, 12 V (Or. No. 2D5423368C). Peugeot 203, 403, 404, 204. Panhard. Renault Dauphine, R8, Floride, Caravelle, R4, Estafette. Simca. Dimension: 15.0 x 8.0 x 15,0mm.
Starter brushes, for Paris Rhone starter motor. Large version. Suitable for Citroen 2CV, Renault
R4. The brushes are trapezoidal. Measurements: 11.85 x 15.15 x 12,65mm. For starter motor D9E.
Antenna, for the lateral attachment at A-post. These antennas were Installed with many French
vehicles. E.G. with Citroen 2CV, Renault R4, Citroen HY etc.
Anti-slide mat 120 x 100cm (Luggage compartment mat). Individually cutable. Nothing slips in curves
or by brake; anti-slide-coats on both sides. For car, boat, caravan
Drive shaft crown nut, suitable for Citroen 2CV + Citroen GS. Reproduction. Tightening torque
e: 343-392Nm. Or. No.: A-416-8/5420543
Collar drive shaft center (sliding bellows). Suitable for Citroen 2CV from the fifties + sixties
Or. Nr. AZ372-88. Attention: The sliding sleeve is only attached to the thick side! The thin end slides loosely over the drive shaft!
Collar drive shaft center (sliding collar). Suitable for Citroen 2CV6 + 2CV4. Reproduction. Or
No.: AM372-88A. Attention: The sliding sleeve is only attached to the thick side! The thin end slides loosely over the drive shaft!
Drive shaft boot on wheel side + gearbox side (silicone) for a drive shaft with double universal
joint. Suitable for Citroën 2CV from year of construction 06/1970 to approx. 1975. Also suitable for Citroën AMI6 on wheel side from year of construction 04/1961 and gearbox side from 04/1961. Per piece. Reproduction. Or. No.: AM37399. This rubber is silicone-based and significantly more durable than normal drive shaft boots.
Drive shaft boot on wheel side + gearbox side for a drive shaft with double universal joint
Suitable for Citroën 2CV from year of construction 06/1970 to approx. 1975. Also suitable for Citroën AMI6 on wheel side from year of construction 04/1961 and on gearbox side from 04/1961. Per piece. Replica. Original no.: AM37399
Dashboard rubber bead rubber profile in grey (protective rubber, decorative rubber) for the
dashboard. Suitable for Citroen 2CV. This rubber bead is fitted to the left and right of the speedometer housing.
Dashboard rubber bead rubber profile in black (protective rubber, decorative rubber) for the
dashboard. Suitable for Citroen 2CV. This rubber bead is fitted to the left and right of the speedometer housing.
Dashboard trimming on the left of the speedometer. Color grey. Suitable for Citroen 2CV to year of
construction 6/1972. Or.Nr. AZ985-295A
Dashboard trimming on the right of the speedometer. Color grey. Suitable for Citroen 2CV to year of
construction 6/1972. Or.Nr. AZ985-296A
Car deck speaker pair with 7 cm round casing, bracket included. Black color. Diameter: 104mm
Overall length: 113mm. These retro stereo speakers with plastic casing have been specifically conceived as universal mid-and high-range loudspeakers for vintage cars. Many classic cars can only be equipped with mono speakers. This new 70mm broadband loudspeaker can be directly operated with a car stereo.
Car deck speaker pair with 7 cm round casing, bracket included. Chrome-colored. Diameter: 104mm
m. Overall length: 113mm. These retro stereo speakers with plastic casing have been specifically conceived as universal mid-and high-range loudspeakers for vintage cars. Many classic cars can only be equipped with mono speakers. This new 70mm broadband loudspeaker can be directly operated with a car stereo.
Square surface speaker with chrome-plated cover. Universal fitting. Per piece. Outer dimensions
approx. 175x128mm. The loudspeaker is diagonal, front height 60mm, rear height 80mm.
1703 Articles | Page 8 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
