front axle for Citroën HY
33 Articles
Adjusting nut for the lower ball pin at the wheel hub. Suitable for Citroen HY + 11CV. Thread: 40 x
150. Or. No. ZC 9441 190U + 441190. Made in Europe.
Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating
wheel bearings, cardan joints etc.
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Balls (15 pieces) for the bearing seat of the torsion bar suspension. Suitable for Citroen HY
Diameter: 3,97mm. Per side are 15 balls mounted. Or. No. ZD 9411 200 U
Collar for the ball joint, at the wheel hub. Suitable for Citroen DS, SM + HY. Very good
reproduction. Dimension about: 16x79mm. Or. No. ID 5410027F
Upper wishbone: Axle (with guide sleeve + nut), for the upper support arm of the front axle. Axle
dimensions: 263 x 36mm. Suitable for Citroen HY + 15CV. Or. No. ZC9427082U + ZC9426959U + ZC9427082U. Made in Europe
Upper wishbone: Shim (0.5mm), for the upper front suspension arm of the front axle. Dimension 36.3
x 42mm. Suitable for Citroen HY. Or. No. ZC 9441 217 U
Upper wishbone: Shim (1.0mm), for the upper front suspension arm of the front axle. Dimension 36.3
x 45 x 1.0mm. Suitable for Citroen HY. Or. No. ZC 9441 218 U
Upper wishbone: Sleeve for axle, for the upper support arms of the front axle. Sleeve dimensions
36.5 x 40 x 126mm. Suitable for Citroen HY + 15CV. Or. No. ZC9426959U. Made in Europe
Lower wishbone: Shim (0.1 mm), for the connecting axle between the lower support arms of the front
axle. Suitable for Citroen HY. Or. No. ZC 9427 088 U
Lower wishbone shaft: Large repair kit for the lower wishbone shaft (splined shaft). Suitable for
Citroen HY. Consisting of: 1 splined shaft (H 434-99A), 2 splined shaft sleeves, 2 silent block rubbers, press-in tool. The rubbers can be pressed in with a standard workshop press! On almost all HYs, the splines on the shaft are so rusted that the shaft splines in the sleeve skip. Reproduction Made in Germany.
Lower wishbone shaft: Repair kit, small, for the lower wishbone shaft (splined shaft). Suitable for
Citroen HY. Consisting of: 2 splined shaft sleeves, 2 silent block rubbers, press-in tool. The rubbers can be pressed in with a standard workshop press! On almost all HYs, the splines on the shaft are so rusted that the shaft splines in the sleeve skip. Reproduction, Made in Germany.
Swing arm bearing outside. Suitable for Citroen HY. Outside diameter: 100,0mm. Inside diameter
55,0mm. Width : 26,75mm.
Swing arm bearing inside. Suitable for Citroen HY. Outside diameter: 80,0mm. Inside diameter
40,0mm. Width : 24,75mm. Or. No. ZC9620006U
locking plate for the mounting from the ball pin, at the front axle. Suitable for Citroen HY. Or
No. ZC9441187U. Made in Germany.
33 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
