heating and ventilation for Citroën HY
60 Articles | Page 1 of 2
Rubber knob for the heater flow control valve, in the interior (engine tunnel). Suitable for
Citroen DS Non Pallas, up to year of construction 1968. Citroen HY for the heating. Or. No. ZC9804104U
Heating hose. Suitable for Citroen HY. Inside diameter: 50,0mm. Length: 1050,0mm. In the Citroen
HY, until year of construction 06/1966, the hose was 880mm long. From the year of construction 7/1966, the hose has been 1020mm long. Please cut to length!
Heater radiator hose 90°. Suitable for Citroen DS + HY (e.g. old version heater radiator). Leg
length about 25mm both sides. Inside diameter about 12-15mm. Or. No. DF642-79
Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of
f painted sheet metal. Or. No. 5403748
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Knob for opening mechanism of the Ventilation shutter. Color blue, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color cream, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color grey, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color white, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color green, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color orange, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color red, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color black, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock
Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, colour black, screwable, for heating adjustment and air distribution. Reproduction made
of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, chrome plated, screwable, for heating adjustment and air distribution. Reproduction
made of metal! Suitable for Citroen 2CV, DS, HY.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Radiator hose (water hose), for inlet and outlet of the heater radiator (heat exchanger). Suitable
for Citroen HY. Length: 1000mm. Inside diameter: 15mm.
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Nut for the handwheel of the headlight adjustment and the Ventilation shutter. Suitable for Citroen
2CV. Heater adjustment for Citroen HY + DS19
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
60 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
