crankshaft-camshaft-piston-flywheel for Peugeot 404

Diesel, liner gasket bottom (4x). Suitable for diesel engine: XD85, TMD85, XD88, XDP88, XD4x88

XD90, XD4x90. For the following vehicles: Peugeot 403, 404, 504, J7. Citroen HY Diesel.

Piston ring set, for 4 pistons. Suitable for HY Diesel. Peugeot 404 Diesel. Peugeot 504 Diesels, J7

7 Diesel. Engine: XD, XDP, TMD4.88. Bore: 88,0mm. Piston rings: 2,0 + 2.0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Crankshaft bearing, standard dimension. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D

J7D. Engine: XD/P85 + XDP90 (1816cc + 2112cc).

Crankshaft bearing, oversize 0,30. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D, J7D

Engine: XD/P85 + XDP90 (1816cc + 2112cc). Dimension: 0,30 (for crankshafts with the measurement of 54.694 to 54,709mm).

Crankshaft bearing, oversize 0,50. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D, J7D

Engine: XD/P85 + XDP90 (1816cc + 2112cc). Dimension: 0,50 (for crankshafts with the measurement of 54.494 to 54,509mm).

Crankshaft bearing, oversize 0,80. Suitable for Citroen HY Diesel. Peugeot 403D, 404D, 504D, J7D

Engine: XD/P85 + XDP90 (1816cc + 2112cc). Dimension: 0,80 (for crankshafts with the measurement of 54.194 to 54,209mm)

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.30

oversize. Diameter crankshaft: 44,675 to 44,691mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.15

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.50

oversize. Diameter crankshaft: 44,475 to 44,491mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.16

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension

Standard dimension. Diameter crankshaft: 44,975 to 44,991mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.14 + 0606.01.

P 203/403/404, camshaft drive chain, 64 chain links (duplex, double chain). Suitable for Peugeot

203, 403 + 404. Or. No. 0816.06

P 403/404, crankshaft bearing, 0.8 oversize. Suitable for Peugeot 404, of year of construction 1961

to 1964 (starting from engine 4036261, 3 crankshaft bearings, 1618cc). Peugeot of 403, final years of construction.

P 403/404/J7, piston + liner (4 pieces). Suitable for Peugeot 403 (8CV), of year of construction

1955 to 1961. Peugeot 404 U6 Commerciale (8CV). Peugeot J7 B 1400kg. Engine capacity: 1468cc. Bore: 80,0mm. Piston pin: 22 x 67mm. Piston rings: 2,0 + 2.0 + 4.5 + 4,5mm (4 coils). Overall length of the liners: 140mm

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403 D, 404 D, Peugeot

J7 Diesel. For engine: XDP 85. Engine capacity: 1816cc. Bore: 85mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  82,21 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  78,24 €

P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 93mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  82,21 €

P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 96mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403
  208,16 €

P 404, pistons + liner (1 piece), suitable for Peugeot 404, starting from year of construction

1965. For engine: XC5A, XC5P, XC6, KF1, KF2, CKF (3 + 5 crankshaft bearings). Engine capacity: 1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,20mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404, pistons + liner (4 pieces), suitable for Peugeot 404 (carburetor, 404L, 404 U6 with 3 + 5

crankshaft bearings). Engine: XC5, XC5P (second mounting). Engine capacity: 1618ccm. Compression: 7,6: 1. Bore: 84mm. Piston pin: 22 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404, pistons + liner (4 fittings), suitable for Peugeot 404. For engine: XC6. Engine capacity

1618cc. Compression: 8,3: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136,00mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404, pistons + liner (4 fittings), suitable for Peugeot 404. For engine: XC5. Engine capacity

1618cc. Bore: 84mm. Piston pin: 23 x 69mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 89mm. Height totally: 136mm. Outside diameter above: 99mm. Height from downside to bulge (base) of the liner: 114mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404, crankshaft bearing, standard dimension. Suitable for Peugeot 404, before year of

construction 1970. Only for engine: XC5 (5 crankshaft bearings).

P 404, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, before year of construction

1970. Only for engine: XC5 (5 crankshaft bearings).

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions

78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/504, piston rings, for 1 piston. Suitable for Peugeot 404, 504, J7. Engine: XC5, XC6, XC7

Compression: 7,6: 1. Bore: 84mm. Piston rings: 2,0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504, crankshaft bearing, standard dimension. Suitable for Peugeot 404, from year of

construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Or. No. 011315, 011317, 011318.

P 404/504, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

P 404/504, crankshaft bearing, oversize 0,50. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Diameter 58,9/58,0/56,7/56,65/54,4 width 29,5/21,5/29,3

P 404/504/505, liner gasket bottom. Fits Peugeot 404 from year of construction 01/1970 (engine XC7

CM7). 504/505 from 01/1971 (engine XM7, XN1, XN1A). J7 (engine XM7P + XC7P). Engines until year of construction 06/1984

P 404/504/505, belt pulley on the crankshaft. Suitable for Peugeot 404, 504, 505. Or. No. 0515,46 +

0515E2. Diameter: 13,10cm. Outside diameter of the scroll seal: 45,35mm.

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D

Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

P 404/504/J7, piston + liner (4 pieces), suitable for Peugeot 404, J7 + 504. For engine: XC7, XC7P

Engine capacity: 1618cc. Compression: 7,6: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 99,20mm. Height from downside to bulge (base) of the liner: 90,03mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston + liner (1 fitting), suitable for Peugeot 404 Diesel, 504 Diesel, Peugeot J7 Diesel. Citroen

HY Diesel. For engine: XD8, XDP4/88. Engine capacity: 1948ccm. Bore: 88mm. Piston pin: 28 x 72,0mm. Piston rings: 2,0 - 2.0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 96mm. Height totally: 173,10mm. Outside diameter above: 106,30mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston + liner (4 fittings), suitable for Peugeot of 404 Diesel, 504 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD8, XDP4/88 (1 series). Engine capacity: 1948cc. Bore: 88mm. Piston pin: 28 x 74,40mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 94mm. Height totally: 173,20mm. Outside diameter above: 104,90mm. Height from downside to bulge (base) of the liner: 129mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Connecting rod bearing (complete set) for fuel engines with 5 crankshaft bearings. Dimension: 0.30

oversize. Diameter crankshaft: 49,675 to 49,691mm. Wide one: 23,40mm. Suitable for Peugeot engines: XB5 (Peugeot 404. 1468cc (1,5L). Year of construction 1960 - 1973). XC5, XC5P, XC6, XC7, XC7P (Peugeot 404. 1618cc (1,6L). Year of construction 1964 - 1975). XM, XM1, XM7, KF5, KF6 (Peugeot 504. 1796cc (1,8). Year of construction 1969 - 1981). XN, XN1, XN1P, XN1T, XN2, XN6 (Peugeot 504 + 505. 1971cc (2,0L). Year of construction 1971 - 1987). The engines are partly also installed in Peugeot J5 + Citroen C25. Or. No. 0606.66

Connecting rod bearing (complete set) for fuel engines with 5 crankshaft bearings. Dimension: 0.50

oversize. Diameter crankshaft: 49,475 to 49,491mm. Wide one: 23,40mm. Suitable for Peugeot engines: XB5 (Peugeot 404. 1468cc (1,5L). Year of construction 1960 - 1973). XC5, XC5P, XC6, XC7, XC7P (Peugeot 404. 1618cc (1,6L). Year of construction 1964 - 1975). XM, XM1, XM7, KF5, KF6 (Peugeot 504. 1796cc (1,8). Year of construction 1969 - 1981). XN, XN1, XN1P, XN1T, XN2, XN6 (Peugeot 504 + 505. 1971cc (2,0L). Year of construction 1971 - 1987). The engines are partly also installed in Peugeot J5 + Citroen C25. Or. No. 0606.67

Connecting rod bearing (complete set) for fuel engines with 5 crankshaft bearings. Dimension: 0.80

oversize. Diameter crankshaft: 49,175 to 49,191mm. Wide one: 23,40mm. Suitable for Peugeot engines: XB5 (Peugeot 404. 1468cc (1,5L). Year of construction 1960 - 1973). XC5, XC5P, XC6, XC7, XC7P (Peugeot 404. 1618cc (1,6L). Year of construction 1964 - 1975). XM, XM1, XM7, KF5, KF6 (Peugeot 504. 1796cc (1,8). Year of construction 1969 - 1981). XN, XN1, XN1P, XN1T, XN2, XN6 (Peugeot 504 + 505. 1971cc (2,0L). Year of construction 1971 - 1987). The engines are partly also installed in Peugeot J5 + Citroen C25.

Connecting rod bearing (complete set) for fuel engines with 5 crankshaft bearings. Dimension

Standard dimension. Diameter crankshaft: 49,975 to 49,991mm. Wide one: 23,40mm. Suitable for Peugeot engines: XB5 (Peugeot 404. 1468cc (1,5L). Year of construction 1960 - 1973). XC5, XC5P, XC6, XC7, XC7P (Peugeot 404. 1618cc (1,6L). Year of construction 1964 - 1975). XM, XM1, XM7, KF5, KF6 (Peugeot 504. 1796cc (1,8). Year of construction 1969 - 1981). XN, XN1, XN1P, XN1T, XN2, XN6 (Peugeot 504 + 505. 1971cc (2,0L). Year of construction 1971 - 1987). The engines are partly also installed in Peugeot J5 + Citroen C25. Or. No. 0606.65

Connecting rod bearing set, 0,30 undersize. Suitable for Citroen HY Diesel. Peugeot 404 Diesel

Peugeot 504 Diesel, J7 Diesel. Engine: XD88, XD2, XD2P94, XD4x88, XD4x90, XD90, XDP4.88, XDP4.90, XDP85, XDP88, XDP90.

Connecting rod bearing set, standard dimension. Suitable for Citroen HY Diesel. Peugeot 404 Diesel

Peugeot 504 Diesel, J7 Diesel. Engine: XD88, XD2P94, XD4x88, XD4x90, XD90, XDP4.88, XDP4.90, XDP85, XDP88, XDP90.

Shaft seal crankshaft (front side). Suitable for Peugeot 204 D, 304D (1,4L), 404D, 504D, J7D, J9D

Talbot express Diesel. Dimension: 42 x 60 x 8mm. Or. No. 0514.11

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chain, 90 chain links (duplex, double chain). Suitable for Peugeot 204 (1,1L), of

year of construction 1965 to 1969. Peugeot 504 (1,8L petrol + 2.3 Diesel). Peugeot 505 (2,3D + 2,5D + TD), 604 (2,3TD + 2,5TD). J7 + J9 (2,3D + 2,5D). Brand manufacturer. Or. No. 0816.21

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot

504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Cam follower (diameter: 24,0mm). Length: 48mm. Suitable for petrol engines: Peugeot 203, Peugeot

403, Peugeot 404, Peugeot 504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot J7. Citroen HY. Or. No. 0942.05. Please compare the dimensions!

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot

404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08

Push rod inlet (6.75 x 185mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504

Peugeot 505, Peugeot J7. Or. No. 0939.03

Plug screw in the crankshaft. Dimension: M24 x 1,5. Suitable for Peugeot 204, 304, 305, 404, 504

505. Or. No. 0507.06

Plug screw crankshaft. Suitable for Peugeot 404, 504, 505. Thread: M22 x 1,5. 050706