404/504/505 allen screw for the clutch securement. Suitable for Peugeot 404, 504 + 505. Thread: M7
Length: 17mm. Or. No. 6913.22
clutch for Peugeot 404
32 Articles
Bush in the fly wheel. Suitable for Peugeot 204, 304, 404, 504. Inside diameter: 12mm. Outside
diameter: 15mm. Height: 15mm.
Plastic line (nylon) between clutch taking cylinder and clutch master cylinder (without ends)
Outside diameter: 6,3mm. Inside diameter: 4,3mm. By meters. Suitable for Peugeot 204, 304, 404, 504, 505, 604. Only use DOT3 + DOT4 (never use DOT5 or DOT5.1!).
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch line sealing ring (for the line between clutch taker + clutch transmitter). Suitable for
Peugeot 204, 304, 404, 504, 505, J7. Dimension: 6.5 x 10.2 x 7.5 mm. Or. No. 2091.03
Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204, 304, 404, 504, 505
J7. This sleeve is inserted to the end of the clutch line!
Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for Peugeot 204, 304
404, 504, 505, J7. Or. No. 2091.01. Note: There was plastic line with 6,3mm, 7,0mm + 7,3mm diameter. If necessary rebore the screw on that suitable diameter.
P 203/403/404, clutch release sleeve such as original (with graphite coil). Suitable for Peugeot of
203. 403 + 404 with C3 gearbox. Diameter graphitic coil: 60mm. Inside diameter graphitic coil: 35mm. Total width: 96mm. The clutch release sleeve is supplied in a strengthened version. Or. No. 2041.11. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
PDF FILE 
P 403/404, release bearing fixing clip (short version). Suitable for all Peugeot 403 + Peugeot 404
(C3 gearbox). Attention: Long (71425) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.03
P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot 403 + Peugeot 404
(C3 gearbox). Attention: Long (this) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.05
P 403/404, clutch release sleeve, for C3 gearbox (not suitable for BA7). Suitable for Peugeot 403 +
404, to year of construction 1967 (excluded 403 U8, 403/7 Diesel). For all engines. The clutch release sleeve is running in ball bearings. Or. No. 2041.11. Please preload the clutch adjust again. Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
P 403/404, clutch disk for Peugeot 403 Diesel + 404 Diesel to year of construction 1967. For
engine: XDP85. Dimension: 200 x 30 x 10mm. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
P 403/404, clutch disk. Suitable for Peugeot 403, of year of construction 1956 to 1964. Peugeot
404, of year of construction 1960 to 1967. Diameter: 215mm, 30x25x10. Teeth: 10. Lining thickness: 7,9mm. Or. No. 2054,16 + 2054.21. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404 Diesel, starting from
year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42
P 404, clutch master cylinder. Suitable for Peugeot 404. Piston diameter: 19,05mm. Connection
M12x1. Distance of the fixing hole: 50mm. Or. No. 2095.11. Made in Europe.
P 404, clutch disk. Suitable for Peugeot 404 Cabrio + Coupe, starting from year of construction
1967. Dimension: 215 x 142 x 3,2mm. Hub profile: 29,4mmx24,5mm. 10 teeth.
P 404, improved line between clutch master cylinders and clutch taking cylinders. Suitable only for
Peugeot 404 sedan starting from year of construction 1967. (BA7 gearbox). This line with 2 flexible hoses renews the plastic line. Overall length about 760mm. Or.Nr. 209006
P 404/504, clutch release sleeve for Peugeot 404 gasoline + diesel, from year of manufacture 1967
Peugeot 504 (1.8 + 2.0 gasoline) + diesel. For clutch disc with 8 springs.
P 404/504, clutch release yoke for BA7 gearbox (Bowden cable). Suitable for Peugeot 404, starting
from year of construction 1967. Peugeot 504 + 505. Length: about 195mm. Or. No. 2117.41
P 404/504, clutch completely (Diesel). Suitable for Peugeot 404 D. Peugeot 504 D. Engines: XD88
(1,9L), XD90 (2,1L) to year of construction 07/1981, XD2 (2,3L) to year of construction 07/1981. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Or. No. 2004.90
P 404/504, clutch completely (reproduction). Suitable for Peugeot 404, starting from year of
construction 10/1967. Peugeot 504. 4 liners petrol (engine capacity: 1796cc + 1971cc). Diameter: 215mm. Teeth: 10. Or. No. 2001.90 + 2004.89
P 404/504, clutch set, suitable for Peugeot 404, starting from year of construction 10/1967
Peugeot 504 (petrols), starting from year of construction 07/1968. For gearbox 4M (small clutch release sleeve). Diameter: 215mm. Number of teeth: 10. Hub profile: 10x24,5x29. Or. No. 2001.90 + 2004.89 + 2050.27.
P 404/504, clutch taking cylinder. Piston diameter: 28,57mm. Suitable for Peugeot 404, starting
from year of construction 01/1969. Peugeot 504, starting from year of construction 09/1968 (sedan + Cabriolet). Peugeot J7. Connection: M12x1. Or. No. 2086.04 + 2086.08. Made in Europe.
P 404/504, clutch taking cylinder. Piston diameter: 28,58mm. Connection thread: M10x1. Mounting
holes center to center: 48mm. Length over everything (without collar): 90mm. Suitable for Peugeot 404 to Ident: CH1012372. Peugeot 504 sedan + Cabrio, of year of construction 1/1969 to 1974. Peugeot 304 + J7. Talbot Murena, of year of construction 8/1981 to 1/1985. Or. No. 2086.11 + 2086.13. Made in Europe.
P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove diameter. Suitable
for Peugeot 404 + 504, 505, J7.
P 404/504/505, Allen screw for the clutch securement. Suitable for Peugeot 404, 504 + 505. Thread
M12x1,5. Length: 64mm. Or. No. 6913.61
P 404/504/505, clutch release yoke, for hydraulic clutch (gearbox BA7). Suitable for Peugeot 404
starting from year of construction 1967. Peugeot 504, Peugeot 505. Or. No. 2117.39
P 404/504/505, clutch disk. Dimension: 215mm x 29 x 10mm. 6 springs, 10 teeth. Suitable for Peugeot
404, starting from year of construction 1967 (all petrols). Peugeot 504 + 505 petrols, with 215mm pressure plate and 6 springs in the clutch disk.
P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for
Peugeot 204, 304, 404, 504, 505, 604, J7.
P 404/HY, thrust ring for the clutch pressure plate. Suitable for Peugeot 404. Citroen HY, of year
of construction 10/1968 to 1981.
32 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
