clutch for Peugeot ACDY

Clutch release yoke axle (in the transmission bell housing), suitable for Citroen 2CV6. Length

125mm.

Clutch release lever spring. (Clutch). Reproduction. Suitable for CITROEN 2CV6, starting from year

of construction 1981. Or.Nr.: AM314-9.

Release fork for the clutch. Suitable for Citroen 2CV6, AK, Dyane, last version, from year of

construction 03/1982. The last improved version of the release fork is reinforced compared to the previous version. Of course, our release forks are made of high-quality steel.

• Suitable for this article
• 
  Clutch release lever plastic sleeve, for the bearing in the clutch housing
  2,33 €

Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroen

2CV4 + 2CV6.

Clutch release sleeve 2CV6 + 2CV4, Installed of year of construction 1970 to 1982. Reproduction.

Clutch release sleeve 2CV6, Installed starting from year of construction 02/1982. Reproduction

Made in Europe

Clutch release sleeve for Citroen 2CV6, starting from year of construction 02/1982. Original Valeo.

Clutch release sleeve locking spring, for Citroen 2CV6 starting from year of construction 02/1982.

Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with drum

brake in front). Dyane of year of construction 1968 to 1982. Mehari from 1968 to 1982. The clutch set consists of: Pressure plate (3 levers) clutch disk and clutch release sleeve. Reproduction, made in Europe. Note: The clutch must be adjusted after Citroen work instruction A.312-00! Made in Europe

• Suitable for this article
• 
  Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990
  11,81 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,93 €
• 
  Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the
  9,82 €
• 
  Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original
  12,84 €
• 
  M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly
  0,37 €

Clutch set for Citroen 2CV6, starting from 02/1982, with torsion bars. The new clutch disk with

torsion bars prevents starting acceleration bucking by e.g. light axial runout of the fly wheel or pressure plate. 160mm diameter, 18 teeth.

• Suitable for this article
• 
  Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990
  11,81 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,93 €
• 
  Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the
  9,82 €
• 
  Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original
  12,84 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,46 €
• 
  M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly
  0,68 €
• 
  Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of
  187,43 €

Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in front)

Dyane 6, starting from year of construction 1982. Mehari, of year of construction 4/1982 to 1990. Manufacturer: Valeo. 18 teeth, diameters: 160mm. (Multi-disk) new part.

• Suitable for this article
• 
  Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990
  11,81 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,93 €
• 
  Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original
  12,84 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,46 €
• 
  M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly
  0,68 €
• 
  Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of
  187,43 €

Clutch set for Citroen 2CV6, starting from year of construction 03/1982. Reproduction, Made one in

European Union. 18 teeth, diameters: 160mm. (Multi-disk) new part.

• Suitable for this article
• 
  Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990
  11,81 €
• 
  Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly
  2,93 €
• 
  M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly
  0,68 €

Clutch disk starting from 02/1982. Suitable for Citroen 2CV6.

Clutch disk, starting from year of construction 03/1982. Suitable for Citroen 2CV6. Diameter

160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Clutch disk, to year of construction 02/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of

teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Centring (from synthetic) for the clutch. Suitable for Citroen 2CV

Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without

pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)

M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for

Citroen 2CV6 + 2CV4, to year of construction 1981.

M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for

r Citroen 2CV6, starting from year of construction 1981.