Control light Citroen 2CV, HY, DS. Like original, color black with 4 differently colored caps
(green, blue, red, orange)
for Peugeot Mehari
1647 Articles | Page 17 of 33
Control light Citroen 2CV, HY, DS. Like original, color: chromium-plated, with 4 differently
y colored metal caps (green, blue, red, orange)
Control light green, largely, conically. Reproduction of the original lights. Unfortunately the
quality is not so good. Suitable for Citroen 2CV, DS, HY.
Universal joint retaining ring (check ring) for the drive shaft. Suitable for Citroen 2CV from the
fifties to seventies. AM372-6C
Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc
engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany
Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787
Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm
Original equipment manufacturer "Glaser"
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with drum
brake in front). Dyane of year of construction 1968 to 1982. Mehari from 1968 to 1982. The clutch set consists of: Pressure plate (3 levers) clutch disk and clutch release sleeve. Reproduction, made in Europe. Note: The clutch must be adjusted after Citroen work instruction A.312-00! Made in Europe
PDF FILE 
Clutch set for Citroen 2CV6, starting from 02/1982, with torsion bars. The new clutch disk with
torsion bars prevents starting acceleration bucking by e.g. light axial runout of the fly wheel or pressure plate. 160mm diameter, 18 teeth.
Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in front)
Dyane 6, starting from year of construction 1982. Mehari, of year of construction 4/1982 to 1990. Manufacturer: Valeo. 18 teeth, diameters: 160mm. (Multi-disk) new part.
Clutch set for Citroen 2CV6, starting from year of construction 03/1982. Reproduction, Made one in
European Union. 18 teeth, diameters: 160mm. (Multi-disk) new part.
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Crankshaft for 2CV6. New part. We only import the crankshafts from South America, which are made on
the original tools and with the original materials (this factory produce the 2CV for the South American market). Attention, there are also cheaper crankshafts from China, but we do not offer them for quality reasons.
Crankshaft gear wheel narrowly, for Citroen AMI8 + 2CV6. 22 teeth. Gear-wide: 13,6mm. Wide one
completely: 15,6mm.
- Suitable for this article
Bearing drive shaft in the gearbox, suitable for Citroen 2CV. Manufacturer SKF. The bearing does
not have a groove. Measurement: 52 x 25 x 18.
Bearing for drive shaft, in gearbox. Suitable for Citroen 2CV6. Dimension: 25 x 52 x 15mm. The
bearing is behind the oil seal. Original SKF. Our bearing has a groove for a circlip, but can also be mounted without.
Bearing gearbox - main shaft front, for 2CV. Original SKF. Measurement: 25x52x15mm, with groove for
retaining ring. Or.Nr.: ZC9620002U
Bearing primary shaft rear, reproduction. Suitable for Citroen 2CV6. Inside diameter: 20mm, outside
e diameter: 52mm, 57mm, overall height: 15mm, depth to stop in the case: 11,5mm. Or.Nr. ZC9620308
Bearing primary shaft, for Citroen 2CV6. Or. No.: 95572590. Reproduction. Dimension: 20x52x57x22mm
Depth gauge to bead seat wreath/ring: 19,00mm.
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, starting from year of
construction 09/1972. For carburetor 26/35 CSIC + 26/35 SCIC.
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, to year of construction
09/1972. Nozzle measurement: 55. For carburetor 26/35 CSIC + 26/35 SCIC.
Steering gear repair set for the tie rod guide. Suitable for Citroen 2CV. Consisting of: Pin + seat
bowls + guides, ball pin, rubber,
2-spoke steering wheel, reproduction. Colour: grey. Suitable for Citroën 2CV, Mehari. 385 mm
diameter. The steering wheel also fits the Dyane with the latest dashboard design (i.e. without the extra switches that were mounted on the steering column trim in the first models).
2-spoke steering wheel, reproduction. Colour: black. Suitable for Citroën 2CV, Mehari. 385 mm
diameter. The steering wheel also fits the Dyane with the latest dashboard design (i.e. without the extra switches that were mounted on the steering column trim in the first models).
1647 Articles | Page 17 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
