for Renault AK-AZU

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV, DS, HY, 11CV

Measurements: 43 x 78mm.

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV. 46x90mm

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Reversing lever for warm air distributors (at the front wall) Citroen 2CV. Or.Nr. AZ 644 115. Made

in Germany.

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Underbody console out of sheet metal, for a rocker switch (11,5mm bore). Black paints. Suitable for

Citroen 2CV. This console is shared to an original console from the fifties. It is locked with 2 screws under the dashboard.

• Suitable for this article
• 
  Toggle actuator universal. On - Off. Material: Plastic black.
  3,27 €

Underbody console out of sheet metal, for a cigarette lighter (27mm bore). Black paints. Suitable

for Citroen 2CV. This console is shared to an original console from the fifties. It is locked with 2 screws under the dashboard.

• Suitable for this article
• 
  12-volt cigarette lighter. Universally compatitble. Installation opening: 27.5
  21,72 €

Underbody console out of sheet metal, for a pull-switch (8,0mm bore). Black paints. Suitable for

Citroen 2CV. This console is shared to an original console from the fifties. It is locked with 2 screws under the dashboard

• Suitable for this article
• 
  Pull switch on/off
  4,86 €

Console for a radio in DIN measurements. The console is mounted under the dashboard. Uinversal

fitting, e.g. Citroen 2CV, DS. Dimension cutout for radio: 182 x 53mm. Dimension outside: Height: 76mm. Wide above 250mm (down 220mm). Deep one: 175mm.

Under cover from strengthened plastic fabric (for the seat + backrest). Suitable for Citroen 2CV

This cover is mounted instead of the jute covers.

Undercover made of reinforced plastic fabric - seat bench front or rear (for the seat + backrest)

Suitable for Citroen 2CV. This cover is fitted instead of the jute covers. The plastic fabric is much more durable.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Protection plate made of metal, for the fuel tank, suitable for Citroen 2CV + Mehari. The

protection plate is a very good reproduction of the original protection plate, which there was as option. Only suitable for the original chassis! Or. No. AY72171. Made in Germany.

Protection plate for the engine, for the original chassis. Suitable for Citroen 2CV, AK400, Mehari

This extremely heavy sheet metal is an accurate reproduction of the original protection plate, which was offered by Citroen. Made in Germany.

Chock block from wood. Like original. Suitable for Citroen 2CV

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction 1955 to 1963

Measurement: 34,8x8x77,9 mm. Or. No. A124-7A

• Suitable for this article
• 
  Exhaust valve 2CV4, 425ccm engine. Installed from year of construction 1954 to
  13,44 €

Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of construction 1964. Dimension

32,1 x 8.5 x 89mm. Or. No. AZ124-8

• Suitable for this article
• 
  Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of
  13,44 €

Exhaust valve 2CV4, 425ccm engine. Installed from year of construction 1954 to 1963. 31 x 76 x 8mm

Or. No. AZ-124-8A

• Suitable for this article
• 
  Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction
  12,79 €

Valve 2CV4, exhaust, 435cc engine. Measurement: 34x8,5x88,2. Engine: A79/1

Inlet valve for 2CV4, 435ccm engine, measure: 39x8x89,7mm

Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of construction 1964. Dimension

39 x 8 x 91mm. Or. No. AZ124-7

• Suitable for this article
• 
  Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of
  13,78 €

Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027

• Suitable for this article
• 
  Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026
  10,81 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026

• Suitable for this article
• 
  Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027
  12,79 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Valve clearance adjustment screw, suitable for Citroen 2CV6 + 4. Measurement: 7x17,5mm, overall

ll length 25mm. Or.Nr. A124-4

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cap from aluminum, for Citroen 2CV! These valve caps are installed on 375cc, 425cc, 435cc

engines. On the 435cc engines only a short time.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which
  3,57 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is

tightened frequently too strongly, and licks then oil.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

2CV starting from 1971, stud bolt M7x76mm, for the mounting the valve cap on the cylinder head

Suitable for Citroen 2CV starting from year of construction 1971.

2CV until 1971, stud bolt M7x83,5mm, for the mounting the valve cap on the cylinder head! Suitable

for Citroen 2CV to year of construction 1971.

Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material cork.

Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which have the valve cap

from aluminum casting.

Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made in

Germany.

• Suitable for this article
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from

silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside

diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A

Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of

construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9

Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8,50mm inside diameter, 12,55mm

outside diameter, 49mm long.

• Suitable for this article
• 
  Valve guide inlet for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8mm inside
  15,77 €

Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm inside diameter, 12,55mm

outside diameter, 50,50mm long.

• Suitable for this article
• 
  Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside
  15,77 €

Valve guide exhaust for 2CV-AZL, AZU. Installed from 1949 to 1966. 8mm inside diameter, 12mm

outside diameter, 40mm long.

• Suitable for this article
• 
  Valve guide inlet for 2CV-AZL, AZU. Installed from 1949 to 1966. 8mm inside
  15,77 €

Exhaust valve guide for Citroen 2CV6. Length: 42mm, internal diameter: 8.5mm. Top collar (external

diameter): 10.5/12.5mm