4CV, clutch release sleeve clutch, with graphitic coil. Suitable for Renault 4CV. Outside diameter
graphitic coil: 47mm. Inside diameter graphitic coil: 26,5mm. The bearing is a strengthened reproduction.
clutch for Renault Heckmotor
17 Articles
Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of
a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.
Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch
with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various
Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99
Clutch completely. Suitable for Renault Caravelle (956cc). Renault R8 (956cc + 1108cc), to year of
construction 1965. Diameter: 160mm. Teeth: 10.
Clutch set Renault rear engine (Floride, Dauphine, Caravelle, A106, etc.). 10 teeth (the clutch
disk has torsion springs). 160mm diameter. Completely like original from new parts produced. An old part return is not necessary. Please observe the clutch adjustment in the service manual!
Clutch completely. Suitable for Renault R10 (R1190. 1108cc), starting from year of construction
1969. Engine: 688-02. Diameter: 160mm. Teeth: 20.
Clutch completely. Suitable for Renault R10 (R1192. 1289cc), of year of construction 1969 to 1972
Engine: 810-03. Diameter: 170mm. Teeth: 20.
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch disk, suitable for Renault Caravelle, R8. Diameter: 160mm. Number of teeth: 20. Hub profile
15.2 x 17,3-20N. Manufacturer: Sachs
Flywheel bolt (per piece). Suitable for Renault R4, R5, R6, R7, R8, R10... Original Renault! M
9x1,0 x 25mm, Or. No. old: 0706307900. Or. No. new: 7700854191
17 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
