Renault / rear-engined vehicle / crankshaft-camshaft-piston-flywheel

4CV, piston + liner (4 item). Suitable for Renault 4CV, 1 series (R1062). Engine: 680.01 + 662/2. engine capacity: 747cc. Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 60,0mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is imperative that the liners are mounted with copper rings at the bottom. Our article number 80183

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the following Renault
  9,82 €

4CV, crankshaft thrust washer (axial clearance), 2 oversize 0,10. Suitable for Renault 4CV, until 1957!

Quality: 3

4CV, crankshaft thrust washer (axial clearance), standard dimension. Suitable for Renault 4CV, until 1957!

Quality: 3

4CV, camshaft drive wheel (Novotex). 4/100 oversize. Suitable for Renault 4CV, of year of construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

Quality: 3

4CV, camshaft drive wheel (Novotex). 6/100 oversize. Suitable for Renault 4CV, of year of construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

Quality: 3

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft 35mm)). Dimension: 0,25 undersize.

Quality: 3

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft 35mm)). Dimension: 0,50 undersize.

Quality: 3

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft 35mm)). Standard size.

Quality: 3

4CV, spur gear (Novotex) of 31 teeth. Suitable for Renault 4CV, of year of construction 1949 to 1952. Inside diameter: 18mm. Outside diameter: 97,7mm.

Quality: 0

4CV/Dauphine, piston + liner (4 item). Suitable for Renault 4CV (R1062). Engine: 680.01 + 662/2. engine capacity: 747cc (engine block Dauphine). Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 62,5mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

Quality: 1

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Re
  9,82 €

4CV/Dauphine, connecting rod bearing screw. Suitable for Renault 4CV + Dauphine.

Quality: 3

4CV/Dauphine, Intermediate gear engine control. Suitable for Renault 4CV + Dauphine

Quality: 4

4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm. Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.

Quality: 3

4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter: 132mm. Inside diameter: 24mm. Original from Ferrozell!

Quality: 0

4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm. Outside diameter: 53,5mm. Wide one: 19mm.

Quality: 0

R4/4CV, piston ring set (engine 680). Suitable for Renault R4, of year of construction 1963 to 1967. Renault 4CV, Dauphine. Bore: 54,5mm. Heavy one: 2,0mm + 2,0mm + 3,5mm. Set for 4 pistons.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 2,0mm + 3,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 3,5mm + 3,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Dauphine, piston + liner (4 item). Suitable for Renault Dauphine. Engine: 1093cc. Bore: 60mm. Piston pin diameter: 14mm. Outside diameter down: 62,4mm. Outside diameter above: 72,8mm. Height totally: 121,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Dauphine/4CV, cam follower (hollow version). Suitable for Renault Dauphine + Renault 4CV (you must used the push rods from the Dauphine. Because, the 4CV has normally closed cam followers). Engine: 750cc + 845cc. Diameter: 19,0mm. Or. No. 7700529305

Quality: 3

Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the following Renault liners. Our. No. 80058 (Renault 4CV, R1062). Per piece.

Quality: 3

Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.

Quality: 3

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R5, R6, R10, R12 (R1192, R1170, R1171, R1337, R2126, R2136, R2137).

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4, Camshaft gear wheel (steel). Suitable for Renault R4 (early years of construction). Engine: 680-02 to engine number 363854. Engine: 800-01 to engine number 207836. 34 teeth. Inside diameter: 28mm. Outside diameter: 99,9mm.

Quality: 0

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 3

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to 41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.

Quality: 2

R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)

Quality: 2

R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).

Quality: 2

R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5, 800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Re
  9,82 €

R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, from 1975 onwards. Engines Renault: 688.02/10/11,688, C1E (1108ccm). Standard dimension

Quality: 3

Gear camshaft, 34 teeth. Suitable for Renault R4, R5, R10. 845ccm, 1108ccm, 1289ccm. Note: The mounting centrically has a projection!

Quality: 4

R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle. Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6, R6, Dauphine. Engine: 800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc (34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners gasket bottom (12 pcs.. white = 0.06mm / grey = 0,07mm / red = 0,09mm). Suitable for Re
  14,78 €

R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)

Quality: 2

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  29,66 €

Gear crankshaft, 17 teeth, suitable for Renault R4, R5, R8, R10. Engines 956cc, 1108cc, 1289cc. Installed from 11/1962 to 06/1990. Or. No. 7700564247.

Quality: 4

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize (+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

Quality: 2

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize (+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

Quality: 2

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

Quality: 2