engine cooling for Renault Heckmotor
74 Articles | Page 1 of 2
4CV, radiator made of aluminium. Suitable for Renault 4CV, from year of construction 1949 to 1960
Dimension: 330 x 348 x 56mm. The radiator is handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).
4CV, water pipe cylinder head. Produced from high-grade steel. Suitable for Renault 4CV. Length
329mm. Outside diameter: 14mm
4CV/Dauphine, V-belt pulley. Suitable for Renault 4CV + Dauphine (1 series). Outside diameter
109,5mm. (Inside diameter mounting: 25,0mm).
A110/R8 Gordini, radiator made of aluminium. Suitable for Alpine A110 + Renault R8 Gordini
Delantero Dimension: 580 x 168 x 56mm. The radiator is handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).
A110/R8 Gordini, radiator made of aluminium. Suitable for Alpine A110 + Renault R8 Gordini
Dimension: 290 x 428 x 56mm. The radiator is handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).
Water pump Renault Caravelle, Floride S, R8, R10. Or. No. 7701457447. Caution: The Renault have an
open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Dauphine, heater hose short, from the water pump to the heat exchanger. Suitable for Renault
Dauphine. Inside diameter: 18mm.
Dauphine, heater hose long, from the water pump to the heat exchanger. Suitable for Renault
Dauphine. Inside diameter: 20mm.
Dauphine, radiator hose from the water connector to the radiator. Suitable for Renault Dauphine
Inside diameter both sides: about 31-32mm. Or. No. 5547018
Water pump Renault Floride, Dauphine. New part. Or.Nr.9806440. Caution: The Floride + Dauphine has
an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the
cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.
GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled water). Suitable
for classic engines that also have aluminium and/or copper components (radiator, cylinder head, etc.). Reliable protection against rust, corrosion, foaming and cavitation. Mixing ratio: 50% antifreeze + 50% distilled water. Attention: This is a new antifreeze from TOTAL that replaces the antifreeze "GLACEELF Auto Supra" (CLACELF contains borates, which are no longer permitted in the EU). The two antifreezes can be mixed together. But be careful: CARTECH antifreeze is only mixable with GLACEELF Auto Supra from TOTAL. CARTECH is not mixable with antifreeze from other manufacturers. But it is best to replace the antifreeze completely with TOTAL CARTECH! General information: Amines, nitrites and borates are no longer allowed under the new EU CLP regulations. In addition, 2-ethylhexanoic acids must be removed because they are suspected of being harmful to human reproduction (or in short: it making you impotent!)
PDF FILE 
Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1
kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg
softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Cooling system vent screw. This vent screw has been installed in various Renault models (R4, R5
R8, R16, etc.). However, depending on the year of construction and model, other versions are also available. Please compare. Thread: M6 x 1. Or. No. 7701007672
R8, radiator (new part). Suitable for Renault R8. Diameter connection hose top: 35mm, bottom: 35mm
Radiator mesh: 438 x 290mm.
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
74 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
