Headlamp trim ring (2 fittings), suitable for Citroen 2CV, to year of construction 1990, Citroen
HY. Material: Aluminum. As replacement for the original ones.
for Sonstige-Citroen HY
1685 Articles | Page 26 of 34
Headlamp casing round, grounding, from synthetic. Version Cibie. Suitable for Citroen 2CV + HY
Installed from 1972 to 1990.
- Suitable for this article
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Sliding door guide bow (the clip leads the sliding door in the rails). Suitable for Citroen HY. Or
No. H842-80. Per piece. Made in Germany.
Sliding door rubber stop bar (profile sheet metal, triangular). Suitable for Citroen HY
Vertically, welds behind the sliding door. Or. No. H812-77
Sliding door rail (horzontal). Suitable for Citroen HY. This rail is like the original, it can be
only mounted, if the roof is removed.
Sliding door rail repair sheet metal (horizontal). Suitable for Citroen HY. This rail do not
corresponds to the original, but it can be welded, without dismantling the roof. Length 1480mm.
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Lockcylinder set, suitable for Citroen HY. Consisting of: 2x lockcylinder doors driver's cabin. 1x
lockcylinder for starter lock. 1x lockcylinder rear flap.
Striker plate on the left, chrom-plated. Suitable for Citroen DS, up to year of construction 1971
(2x required). Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79B
Striker plate on the left. Suitable for Citroen DS, up to year of construction 1971 (2x required)
Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79B
Striker plate on the right, chrom-plated. Suitable for Citroen DS, up to year of construction 1971
(2x required). Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79C
Striker plate on the right. Suitable for Citroen DS, up to year of construction 1971 (2x required)
Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79C
Striker plate underlay. Special coarse seal, so that the striker plate cannot slip (anti-slide)
Suitable for Citroen DS, to year of construction 1971. Citroen HY, starting from year of construction 1968.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
1685 Articles | Page 26 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
