M7x50 / screw with shaft. E.g. fastening steering column to steering gear on Citroen 2CV (screw for
the steering tube clamp).
for Sonstige-Citroen HY
1697 Articles | Page 21 of 34
Washers corrugated M8x18 (French name. Striees). Content: 45 units. These grooved washers were
original Installed at French vehicles!
Washers corrugated M8x22 (French name: Striees). Content: 25 units. These grooved washers were
original Installed at French vehicles!
M8 x 25 screws, with 20mm head. The suitable for radiator grill securement to Citroen 11CV. This
screw can be also universal used, for example fasten from bumpers. Or. No. 331101
M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover screw connection on
the 11CV with D-engine. Or. No. 2372-S
M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +
Citroen DS. Measurement: M9x42mm.
Magnetic lifter flexible + washing nozzles adjustment tool. This magnet lifter can be extended up
to 592mm and is flexible at the end. Also the nut in the intake tract far behind is brought out with it again! Additionally it has a steel needle in the handle, with which washing nozzles can be adjusted.
Magnetic bowl, stainless steel bowl with magnetic base and soft rubber shell. Very useful to
collect small parts! 150 mm diameter
Collar for the ball joint, at the wheel hub. Suitable for Citroen DS, SM + HY. Very good
reproduction. Dimension about: 16x79mm. Or. No. ID 5410027F
Collar for the master brake cylinder (for 1 inch (25,4mm) master brake cylinder). Suitable for
Citroen 11CV to year of construction 07/1952. Citroen HY. Citroen 2CV. Peugeot P203. Renault Fregate etc. Dimension: 36 x 54mm.
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 250mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Earth cable (battery ground strap), with battery pole clamp and eye ring. Length: 285mm. Made one
in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 300mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp ring tongue. Length: 350mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 400mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 500mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Open-end spanner - ring spanner set (8 pieces) for inch thread (1/8 - 9/16 Withworth). Many brake
parts on French classic cars often have an inch thread!
Clutch disk, new part. Suitable for Citroen HY, starting from year of construction 10/1968. 8
teeth. Diameter: 215mm. Thickness under load: 9,3mm. Or. No. H313-01B. Made in Europe
Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap
valve timing cover. Very good quality. Made in Germany.
HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine
e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.
Engine gasket set (inclusive cylinder head gasket 1,5mm) Diesel. Suitable for engines: XD88
XDP88-BD, XDP88-BDS, XD90 (1948ccm). Bore: 94mm. Suitable for Peugeot 404 D, 504 D, J7 Diesel. Citroen HY Diesel. Installed from year of construction 1963 to 1975. Inclusive shaft seals. Or. No. 0198.14
Engine gasket set (inclusive cylinder head gasket) Indenor Diesel. For engine: TMD85, XDP85
TMD85-AD, XPD (1816cc). Suitable for Citroen HY Diesel. Peugeot of 403 Diesel, 404 Diesel, 504 Diesel, J7 Diesel. Without shaft seals. Or. No. 0198.24
Engine gasket set completely (inclusive. Cylinder head gasket). Manufacturer original "Glaser
Suitable for Citroen 11CV/11D + Citroen HY 78, to year of construction 09/1963.
Engine gasket set completely (inclusive cylinder head gasket). Suitable for Citroen HY 72 + 78
(bore 78mm = 1911ccm/ 72mm = 1600ccm), starting from year of construction 1963. The suitable liner seals have our article number: 60153. The cylinder head gasket of HY 72 + 78, are identically constructed! The cylinder liners are the same. They differ only in the bore!
Bonnet (old model). Suitable for Citroen HY, to year of construction 09/1964. The bonnet is a
combination made of GRP and metal. With upper hinge and lower latching. Or. No. HY852-01A
Bonnet (nwe model). Suitable for Citroen HY, starting from year of construction 09/1964. The bonnet
is a combination made of GRP and metal. With upper hinge and lower latching. Or. No. HY852-01B
1697 Articles | Page 21 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
