cable tree accessories for Alle DS
68 Articles | Page 1 of 2
Battery pole switch bent (space-saving). Just release knurled head bolt to stop current circuit.It
can be very easily used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!
Battery pole switch. Just release knurled head bolt to stop current circuit.It can be very easily
used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!
Coloured battery terminals. Red for positive. Black for negative. Suitable for all types. The risk
of mixing up the terminals when connecting the battery is now minimised. These coloured battery terminal connectors are suitable for cables with a maximum diameter of 12 mm (cable cross-section up to 113 mm²). They fit terminal sizes of 16-19 mm. They are suitable for 6 V and 12 V batteries. And they look great too! Made in Germany. Designed for DIN A cone terminals with the following diameters: Positive terminal: 19.5 mm at the base of the cone, 17.5 mm at the top of the cone. Negative terminal: 17.9 mm at the base of the cone, 15.9 mm at the top of the cone. The positive terminal is therefore always larger than the negative terminal! The DIN A cone terminal is the standard connection used in Europe for lead-acid car batteries.
Battery pole negative - , Designed for DIN A cone terminals with the following diameters: Positive
terminal: 19.5 mm at the base of the cone, 17.5 mm at the top of the cone. Negative terminal: 17.9 mm at the base of the cone, 15.9 mm at the top of the cone. The positive terminal is therefore always larger than the negative terminal! The DIN A cone terminal is the standard connection used in Europe for lead-acid car batteries.
Battery pole positive +, Designed for DIN A cone terminals with the following diameters: Positive
terminal: 19.5 mm at the base of the cone, 17.5 mm at the top of the cone. Negative terminal: 17.9 mm at the base of the cone, 15.9 mm at the top of the cone. The positive terminal is therefore always larger than the negative terminal! The DIN A cone terminal is the standard connection used in Europe for lead-acid car batteries.
Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be
missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.
Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing
Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable
harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citroën 2CV, DS, ID, HY, 11CV, all classic Renault and Peugeot models.
Cable harness seal for the engine front wall. Material: Foam rubber. Diameter: about 45mm. Suitable
for Citroen DS + Citroen 2CV, HY.
Cable harness seal for the engine front wall. Material: Foam rubber. Diameter: about 40mm. Suitable
for Citroen DS + Citroen 2CV.
Plastic wiring harness holder in the C-pillar. This plastic holder corresponds to the original
plastic strip. It is mounted in the interior on the left and right C-pillar and secures the wiring harness to the indicators on the roof. Suitable for Citroen DS.
Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved
material (NBR/SBR fabric rubber)
Cable binder from rubber, length 155mm. Wide 35mm! For main cable harnesses to 30mm diameter. Now
manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable binder from rubber. Length: 50mm. Made in Germany. Now manufactured from improved material
(NBR/SBR fabric rubber)
Cable binder from rubber. Length: 80mm. Made in Germany. Now manufactured from improved material
(NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
Cable terminal strip, with 3 connection. Suitable for Citroen 11CV + 15CV. This terminal strip can
be also universal used. Optimally to connect the positive cables cleanly. Or. No. 710161
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
68 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
