Exhaust elbow, with securement for an heat protection shield. 4 in 1 manifold. Suitable for Citroen
DS, of year of construction 1966 to 1971. Or. No. DV181-81
intake and exhaust manifold for Alle DS
54 Articles | Page 1 of 2
Exhaust elbow, without securement for a heat protection shield. 4 in 1 manifold. Suitable for
Citroen DS, of year of construction 1962 to 1965. Or. No. DS1811
Exhaust elbow heat protection plate, with isolation (securement with 8 rivets). Suitable for
Citroen DS IE. Or. No. DX181-213A
Exhaust manifold heat shield (shielding plate). Only suitable for Citroen DS, built between 1962
and 1963. Original no. D181-6C. Very elaborate small-batch reproduction, handmade.
Exhaust elbow heat protection shield down and/or inside. Suitable for Citroen DS, with carburetor
engine. Or. No. D5414425W
Exhaust elbow heat protection shield, inside. Suitable for Citroen DS carburetor + injection
engines. Completely small adaptation work is possible. Only this heat protection shield is supplyable. Or. No. DX17114
Exhaust elbow heat protection shield, with outlet for preheating. Suitable for Citroen DS, starting
from year of construction 1972. Or. No. DX18114
Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, to
year of construction 1972. Or. No. DS18114
Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for
Citroen DS. Or. No. 1D5412151D
Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to the
flame tube. Suitable for Citroen DS + Citroen HY. Or. No. 5412150T
DS starting from 65, elbow pipe (flame tube), produced from high-grade steel! Suitable for Citroen
ID/DS, starting from year of construction 1965. Or. No. D1826A
DS starting from 65, elbow pipe. Suitable for Citroen ID/DS 19, starting from year of construction
1965. For the engines: DY-DL-DLF-DV-DT. Or. No. DV18251
DS starting from 65, elbow pipe 2 in 1 (Y-pipe). Suitable for Citroen DS, starting from year of
construction 1965. Starting from engine DX. Or. No. DX18244.
DS starting from 65, elbow pipe 2 in 1 from high-grade steel (Y-pipe). Suitable for Citroen DS
starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.
DS from 65, slotted nut, M7 thread. Width across flats 11mm. Attaches double elbow pipe (front
exhaust pipe) to the manifold. Suitable for Citroen DS.
DS from 65, slotted nut, M8 thread. Width across flats 13mm. Attaches double elbow pipe (front
exhaust pipe) to the manifold. Suitable for Citroen DS.
Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of
construction 1965. Or. No. 1D 5412 149G + N181-2
Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left
and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L
Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by
vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X
Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction
7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.
Manifold seal inlet, suitable for Citroen ID19. Or. No. N141-11. Inside diameter: 45mm. Connector
long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 9,0mm.
Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF
Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.
Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter
45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.
Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter
39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.
Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal
between exhaust manifold + Y-pipe (exhaust). Per piece.
copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper
nuts: no rust, no sticking!
Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow
with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!
Connection rubber for the intake manifold. Suitable for DS IE (injection engine). Outside diameter
59mm. Height: 45mm. Per piece. Or. No. DX141117A
Seal under carburetor (insulating plate), between that intake manifold and the carburetor. Suitable
for Citroen DS, starting from year of construction 1965. Or. No. 1D5440931E
Preheating hose, from the exhaust elbow to the air filter. Suitable for Citroen DS. Length: 270mm
Diameter: 55mm. Or. No. DX171231A
Preheating hose for the intake manifold (carburetor preliminary heating). Inside diameter: 19/24mm
Suitable for Citroen DS, to year of construction 07/1972 (Solex carburator). Engine: DV. Or. No. DV235-35A
Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS
19 semi-automatic transmission, of year of construction 1966 to 1968. Inside diameter: 16,0mm + 19,0mm. Or. No. DY235-140A
Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS
starting from year of construction 07/1972. Or. No. DX235-140A.
54 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
