Cylinder head for Alle DS

Sealing rubber (rubber ring) under the valve cap. Seal for the plug body. Suitable for Citroen DS

Citroen HY, Citroen CX.

• Suitable for this article
• 
  Valve cover gasket, suitable for Citroen DS, starting from year of construction
  6,89 €

Exhaust valve, for Citroen DS + HY. Dimension: 39x9x104mm, the valves have 3 grooves for the valve

spring cotter at the shank. Or.Nr. DX 124-108 A

• Suitable for this article
• 
  Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical
  6,84 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €
• 
  Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The
  36,59 €
• 
  Valve guide exhaust, from bronze. Suitable for Citroen DS + CX. Dimension: 9 x
  8,83 €

Exhaust valve, suitable for Citroen DS, to year of construction 1965. Citroen HY, final models

Diameter: 37mm. Length: 105,5mm. Valve stem: 9mm. Or. No. DS1248A

• Suitable for this article
• 
  Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical
  6,84 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €
• 
  Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The
  36,59 €
• 
  Inlet valve, suitable for Citroen DS, to year of construction 1965. Citroen HY
  15,13 €

Seal (14mm) under the oval closing sheet at the cylinder head (face). Suitable for Citroen DS, to

year of construction 07/1972. Inside diameter: 42mm. Bore screwed holes: 8,0mm. Or. No. DX112-75

Seal for the cover plate at the cylinder head. Suitable for Citroen 11CV, ID19, DS19, HY

Measurements: 80x71mm. Or.Nr.457469. Made in Germany

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Seal for the cover plate at the cylinder head. Suitable for Citroen DS, starting from year of

construction 1968. Or. No. DX11278. Made in Germany.

Seal for the cover plate at the cylinder head. Suitable for Citroen DS19, of year of construction

1959 to 1966, Citroen HY. Or.Nr. DM112-88. Made in Germany.

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Screw M7x20, galvanized
  0,55 €

Seal under the closing sheet at the cylinder head (left side). For engines: DV, DY, DL, DLF, DT

suitable for Citroen DS. Or. No. N112-88A (8mm of holes)

Inlet valve, suitable for Citroen DS + Citroen CX 2000, 2200, 2400. Dimension: 49x8x116mm.

• Suitable for this article
• 
  Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical
  6,84 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €
• 
  Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The
  36,59 €
• 
  Valve guide inlet, suitable for Citroen DS, starting from year of construction
  10,81 €

Inlet valve, suitable for Citroen DS, to year of construction 1965. Citroen HY, final models

Diameter: 42mm. Length: 107,7mm. Valve stem: 9mm. Or. No. DS1247

• Suitable for this article
• 
  Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical
  6,84 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €
• 
  Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The
  36,59 €
• 
  Exhaust valve, suitable for Citroen DS, to year of construction 1965. Citroen
  15,13 €

Fuel injection nozzle rubber above (large rubber), suitable for Citroen DS21IE + DS23IE. Dimension

21.8 x 32.2 x 7,6mm. Or.Nr.: 5412354K

• Suitable for this article
• 
  Fuel injector, suitable for Citroen DS IE. Very good reproduction from Europe
  237,01 €

Fuel injection nozzle rubber down (small rubber), suitable for Citroen DS21 IE + DS23 IE

Dimension: 7.4 x 14.6 x 4,5mm. Or. No. DX144101A

• Suitable for this article
• 
  Fuel injector, suitable for Citroen DS IE. Very good reproduction from Europe
  237,01 €

Rocker arm exhaust, suitable for Citroen DS, from year 1965. Citroen HY with aluminum cylinder

head. Total length approx. 107mm. Or. No. 1D5412021R + D124-2A

• Suitable for this article
• 
  Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical
  6,84 €
• 
  Valve adjusting screw (valve clearance). Suitable for Citroen DS + Citroen HY
  3,92 €

Rocker arm inlet, suitable for Citroen DS, from year 1965. Citroen HY with aluminum cylinder head

Total length approx. 75mm. Or. No. 1D5412568L + D124-2

• Suitable for this article
• 
  Valve adjusting screw (valve clearance). Suitable for Citroen DS + Citroen HY
  3,92 €

Rocker lever axle, spring for the exhaust rocker arm. Per piece. Suitable for Citroen DS, starting

from year of construction 1965 + Citroen HY, starting from year of construction 1967. Dimension: 18.5 x 20.5 x 17mm. Or. No. DD124-80 + 1D 5412571U

Rocker lever axle, spring for the inlet rocker arm. Per piece. Suitable for Citroen DS, starting

from year of construction 1965 + Citroen HY, starting from year of construction 1967. Dimension: 18.3 x 21.3 x 42,5mm. Or. No. DD124-98 + 1D 5412573R

Rocker lever axle, for the exhaust valves. Suitable for Citroen DS (starting from year of

construction 1965) + Citroen CX. Length: 66mm. Diameter: 18mm. Per piece.

Rocker arm shaft, for the exhaust valves. Suitable for Citroen HY petrol. Citroen DS19 + ID19

Dimension: 16 x 66mm. Or. No. DS124-21A

Rocker lever axle, for the inlet valves. Suitable for Citroen DS (starting from year of

construction 1965) + Citroen CX. Length: 426mm. Diameter: 18mm. Per piece.

Rocker lever axle, for the inlet valves. Suitable for Citroen HY petrol. Citroen DS19 + ID19

Dimension: 17.95 x 420mm. Or. No. DS124-4

Rocker arm shaft distance ring. Suitable for Citroen DS. Dimension: 18 x 25mm. Or. No. DS12485

Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No

DS181-2

Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of

construction 1965. Or. No. 1D 5412 149G + N181-2

Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left

and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L

• Suitable for this article
• 
  Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal
  3,23 €

Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by

vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X

• Suitable for this article
• 
  Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x
  5,86 €

Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction

7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.

Manifold seal inlet, centrically. Suitable for Citroen ID19. Dimension: 48x61x37mm.

Manifold seal inlet, suitable for Citroen ID19. Or. No. N141-11. Inside diameter: 45mm. Connector

long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 9,0mm.

Manifold seal inlet. Suitable for Citroen DS 23.

Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF

Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.

Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter

45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.

Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter

39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Metal ring on the cylinder head (32 x 41 x 0,5mm). The ring is mounted over the spark plugs pipes

Suitable for Citroen DS. Or. No. 1D5416691

Metal ring on the cylinder head (32 x 41 x 1mm). The ring is mounted over the spark plugs pipes

Suitable for Citroen DS. Or. No. 1D5416691B

Cap on the valve cap, for filling in engine oil. The cap is supplied with seal + holding rope

Suitable for Citroen DS + Citroen HY.

• Suitable for this article
• 
  Sealing rubber, for the oil filler neck cap. Suitable for Citroen DS, 11CV, HY.
  10,81 €

Sealing rubber, for the oil filler neck cap. Suitable for Citroen DS, 11CV, HY.

• Suitable for this article
• 
  Cap on the valve cap, for filling in engine oil. The cap is supplied with seal
  39,57 €

Rubber cap oil exhausting suitable for the valve cap (crank house exhausting), for Citroen HY + DS

early years of construction. Or. No. DS132-48

Oil exhausting rubber cap, for the valve cap. Suitable for Citroen DS, HY, CX. Inside diameter

40mm. Inside diameter crank house exhausting: 7,0mm.

Ring seal under that bearing block from the inlet rocker arm shaft. Suitable for Citroen DS +

Citroen HY. Dimension: Measurements: 8.9 x 14.3 x 2,7mm. Made in Germany.

Screw for the securement of the cylinder head, on the exhaust side (short screw). Suitable for

Citroen DS. Dimension: M10 x 114,5mm. Or. No. DX1124

Screw for the securement of the cylinder head, on the inlet side (long screw). Suitable for Citroen

DS. Dimension: M10 x 160mm. Or. No. N1124A

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

Temperature switch at the cylinder head, for the red warning lamp in the dashboard. Suitable for

Citroen DS. Or. No. 5414426G

• Suitable for this article
• 
  Label coolant "TOTAL". Dimension: 31 x 62mm.
  2,93 €

Valve cover gasket, suitable for Citroen DS, starting from year of construction 1965. Citroen HY

petrol, starting from year of construction 1969 (final version). Citroen CX (first version).

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve cover gasket. Suitable for Citroen DS + HY, to year of construction 7/1961. Citroen 11CV

Citroen U23.

Valve cover gasket. Suitable for Citroen DS, of year of construction 7/1961 to 1966. Citroen HY

The seal is flat and has a circulating edge! Or. No. DS132-4A

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Valve guide exhaust, from bronze. Suitable for Citroen DS + CX. Dimension: 9 x 13 x 44,5 mm. Per

piece.