transmission for Alle DS

Drive shaft securement at the gearbox, Bibax rubber. Per side. Suitable for Citroen DS19, to year

of construction 1965. Or. No. D3762

Sealing ring (O-ring), for the semi-automatic transmission and above at the steering gear. Suitable

for Citroen DS + Citroen SM. Dimensions: 4,2x8x1,9mm. Or.Nr. 24818009T. Made in Germany.

Sealing ring in the gearbox lid. Suitable for Citroen DS. Dimension: 19.8 x 27 x 3,6mm. Or. No

250,290 09W + ZD9502900U

Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS, to year of

construction 1965. Or. No. D331-79

Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS. Or. No. DV33179 +

1D5411381J. Made in Germany.

Double ball bearing primary shaft, for 5 speed gearbox. Suitable for Citroen DS. Dimension: 25 x 66

71,4 x 27mm. Or. No. ZC9620331U

Double ball bearing, for 5 speed gearbox (front side shaft, between 4 + 5 speed). Suitable for

Citroen DS. Dimensions: 30 x 76/82,55 x 33,40mm. Or. No. ZC9620333

Double ball bearing, for the primary shaft rear. Suitable for Citroen DS, with 4 gear gearbox

Dimension: 30 x 72 x 78.6 x 30,2. Or. No. ZC9620164U

Gearbox sealing ring. Suitable for Citroen HY, starting from year of construction 1974. Citroen DS

Or. No. 22478009K

Gearbox inlet shaft (primary shaft) locking spring. For 4 gear + 5 gear gearbox. Suitable for

Citroen DS. Diameter: 14,8mm. Or. No. 1D 5411 393 P + DX322-49.

Gearbox inlet shaft (primary shaft) retaining ring (circlip). For 4 gear + 5 gear gearbox. Suitable

for Citroen DS. Diameter: 26,5mm. Heavy one: 1,1mm. Or. No. 26 205 439D + ZC 9620 543U.

Gearbox inlet shaft (primary shaft), seal for the support tube. For 4 gear + 5 gear gearbox

Suitable for Citroen DS. Dimension: 35 x 6mm. Or. No. 1D 5411 397H + DV332-20. Made in Germany.

Gearbox inlet shaft (primary shaft). Suitable for Citroen DS, starting from year of construction

1966. The primary shaft fits on 4 + 5 gear gearbox.

• Suitable for this article
• 
  Gearbox inlet shaft (primary shaft) locking spring. For 4 gear + 5 gear
  9,87 €
• 
  Gearbox inlet shaft (primary shaft) retaining ring (circlip). For 4 gear + 5
  4,56 €

Gearbox transmission pinion (28 teeth), between primary shaft and fifth gear. Suitable for Citroen

DS (D-Super), to year of construction 07/1972. Or. No. 1D 5406 376C + S333-129A

Gearbox transmission pinion (29 teeth), between primary shaft and fifth gear. Suitable for Citroen

DS (DJ, DP, DJF), starting from year of construction 07/1972. Or. No. DJ333-127A

Gearbox gasket set complete. Suitable for Citroen DS + ID.

Gearbox bearing on top, front (primary shaft). Suitable for Citroen HY, from year 01/1972. Citroen

DS (4 speed gearbox), from year 11/1971. Dimensions: 25 x 62,0 x 67 x 25,4mm. Or. No. 1G 5437164J

Gearbox Oil addetive, 20g. Suitable for 1 liter transmission oil. This additive has been specially

developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and better fuel-efficiency.

Kick-down Bowden cable, total length 770 mm, for Borg Warner automatic transmission. 770mm

Suitable for Citroen DS 21/23 IE.

Kick-down Bowden cable, for Borg Warner automatic transmission. Suitable for Citroen DS 21/23

carburetor engine. Length: 630mm. Or. No. 2D5422688A

Ball bearing, for primary shaft. Suitable for Citroen DS. Dimension: 30 x 62 x 16mm. Or. No

ZC9620159

M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +

Citroen DS. Measurement: M9x42mm.

• Suitable for this article
• 
  M9, nut M9x1,25. For example mounting drive shaft at the gearbox for 2CV
  2,29 €
• 
  Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Roller bearing in front, for the gear shaft. 4/5 gear. Suitable for Citroen DS, with 5 gear

gearbox. Dimension: 41x80x18mm. Or. No. ZC9620335U

Reverse gear pinion. Suitable for Citroen DS, to year of construction 1961 (1 serie). Or. No. D333-9

Reverse gear sliding sleeve (gear wheel, 22 teeth). For 4 gear + 5 gear gearbox. Suitable for

Citroen DS. Or. No. 1D 5411 416P + DX333-111A.

Gear shift selector block, paper seals. Suitable for Citroen DS. Or. No. DS334-59A (4x8mm + 2x6mm

holes) + DS334-61

Gear shift seöector block repair set, for hydraulic system LHM. Suitable for Citroen DS.

Gear shift selector block, in the exchange. Hydraulic system LHM. Suitable for Citroen DS IE, with

fuel injection engine. Or. Nr.DXN33410A. Plus Old part deposit 150 Euro.

Gear shift selector block, in the exchange. Hydraulic system LHM. Suitable for Citroen DS, with

carburetor engine. Installed starting from year of construction 1969. Or. Nr.DXN33407. Plus Old part deposit 250 Euro.

Gear shift selector block, in the exchange. Hydraulic system LHS. Suitable for Citroen DS, to year

of construction 1965. Plus 150 Euro Old part deposit.

Gear shift lever bracket: Gasket kit for the hydraulic lines at the gear shift lever bracket

Suitable for Citroen DS, starting from year of construction 1965. Or. No. ZD9503000U

Gear shift lever bracket: Gasket kit for the hydraulic lines at the gear shift lever bracket

Suitable for Citroen DS, to year of construction 1965. Or. No. DS334180D

Switch for the reversing lamps. Suitable for Citroen DS. Or. No. 5416294L + DX 522 026A

Synchronizer in the gearbox, for the 1/2 gear. Suitable for Citroen DS, starting from year of

construction 1965. Dimension: about 63mm diameter above at the cone. Height of the contact area: 9,65mm (that is not the overall height). The synchronizer has 6 slots for the shift dog. Or. No. 96007697

Synchronizer in the gearbox, for the 3/4/5 gear. Suitable for Citroen DS, starting from year of

construction 1965. Dimension: about 67mm diameter above at the cone. Overall diameter: 75,5mm. The synchronizer has 3 slots for the shift dog. Or. No. 1D5411567F

Synchronizer, suitable for Citroen HY, starting from year of construction 1967. Citroen ID

starting from year of construction 1964. Or. No. HY335-16

Speedometer pinion in 4-speed gearbox (16 teeth). Suitable for Citroen DS. Or. No. DT381-101A. The

pinion has an outer diameter of 19.1 mm, the shaft has a diameter of 7 mm.

Speedometer pinion in 4-speed gearbox (16 teeth). Suitable for Citroen DS. Or. No. DV381-1A. The

pinion has an outer diameter of 19.1 mm, the shaft has a diameter of 7 mm.

Speedometer pinion in 5-speed gearbox (21 teeth). Suitable for Citroen DS. Or. No. DX381-101A. The

pinion has an outer diameter of 19.7 mm, the shaft has a diameter of 8 mm.

Speedometer cable pinion in 5 speed gearbox (21 teeth). Suitable for Citroen DS. Or. No. DX3811

Speedometer pinion in 5-speed gearbox (21 teeth). Suitable for Citroen DS. Or. No. DX3811. The pinion has an outer diameter of 19.7 mm, the shaft has a diameter of 7 mm.

Speedometer pinion in the gearbox. 16 teeth! The pinion has an outside diameter of 20,7mm, the

shank has a diameter of 8mm. Suitable for Citroen DS.

Identification plate green, for Citroen. 78x40mm. 2 bores. (Metal). The green identification plates

were often used for gearbox identification!