Tire mounts on a new rim, R135/15. Manufacturer Michelin. We use only our own, series-identical
rims and no reproduction rims! Suitable for Citroen 2CV, AK, Dyane, AMI.
for Alle Mehari
1656 Articles | Page 25 of 34
Tire R135/15 ZX. Manufacturer Michelin. Summer tire. Suitable for Citroen 2CV, AK, AMI, Mehari
Renault Caravelle, Renault 4CV, R8, R10, Dauphine Ondine
Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane
AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.
Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for
Citroen 2CV6, Dyane, Mehari. The belt pulley has been rotated from a 18kg steel block DIN 1,0501 (AISI/SAE 1040, EN C35). Fine balanced pulley, thus avoiding much pressure on the crankshaft. No risk of tearing off as it is not welded. Belt pulley is yellow galvanised (like original). Made by Franzose/Cipere, entire production process in Europe.
Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroen
2CV, with generator propulsion over V-belts. (2CV6 + 2CV4)
Ring nut suitable for the wheel bearing, for 2CV. (Not suitable for AK, ACDY, AMI). Very properly
matching reproduction. Dimension: M74 x 1,5. Tightening torque: 343-392Nm. Made by "Franzose"
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Tail lamp and/or stop light round, original Seima 3054. 3055. (no reproduction, with test symbol
E") 1 thread light, only brake or taillight! With metal base + support! The glass has 68,5mm diameter! Used in HY, AZU, DS - in many Renault + Peugeot models as well!
Taillight + stop light, round, (2 thread light). 70mm diameter. Suitable for Citroen AK 400, DS
BREAK, HY, Mehari. Version AXO! (suitable bulb: Item 14037). (Reproduction, without "E" test mark)
Taillight cap red (original AXO, with "E" test mark). Suitable for Citroen AK. Citroen DS BREAK
HY, Mehari, AMI6. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar level from the inside measured: 14,5mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap red (original SEIMA, with test characters). Suitable for Citroen AK. Citroen DS
BREAK. HY, Mehari. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar level from the inside measured: 10,0mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap, red, round (Reproduction, without "E" test mark), for Citroen AK/AZU, DS Break, HY
Y, Mehari, AMI6. AK544262A, for manufacturer Seima
Taillight cap, befitting for Citroen ACDY (Dyane Van), Mehari 4x4, + Peugeot 404 Pick UP, 504 Pick
UP, J7. Fits on the left + on the right.
Reflector square, framed in metal. With fixing straps, dimensions approx. 60x45mm. These reflectors
were used in many French cars!
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Cable harness color markings (100 item), for plugs with 4mm diameter. 9 different colors. Suitable
for Citroen 2CV, DS, HY, SM, GS, CX, Peugeot
Switch - push button, square, with chrome frame. Universally suitable. Please note: this is a push
button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Gearshift knob (ball), made of plastic, with 2 printed horse heads (CV = horse / 2CV = 2 horse
heads) + gearshift diagram! Colour black. Suitable for Citroen 2CV, Dyane, Mehari
1656 Articles | Page 25 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
