Windscreens (windscreen) piping assembly tool - bracket inserts. For small piping. There are 5
brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.
for Citroën 2CV 2CV4
2611 Articles | Page 40 of 53
Windscreen Installation Tool Set. Windshield sealing trim assembly tool. With this tools will the
rubber lip (seal) inclination (spread) and it can fit the sealing trim at the same time. Attention: The tool is for very wide piping. For chrome piping e.g. Citroen 2CV, Renault R4 etc. small brackets must be fitted. See our item number 20137.
Permanently elastic window sealant. Original Teroson! 75ml tube. Application : Ideal for sealing
rubber-mounted front, rear and side windows. Very stable, water resistant, remains elastic. Good adhesion even on damp windscreens.
Vehicle Window sealant permanent elastic. Original Teroson! Cartouche 310ml. Application: Ideally
to sealing rubber-mounted front. - Tail and side windows. Very stably, water-resistant, remains elastic. Good adhesion also on wet disk.
Washer reservoir electrical with built-in set for 2CV and other classical cars. Complete with
h push-button, cable, cross bars etc. very practical and small. Width 19,5cm, height of 16,5cm, depth 5,5cm
Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L. width: 122mm
overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
Washer reservoir, rubber bushing above in the cap (for the hose). Suitable for Citroen DS, HY, 2CV
etc. dimension: 5 x 18 x 4mm.
Windscreen washer reservoir, suitable for Citroen 2CV, AK. This windscreen washer reservoir looks
like the original reservoir. Of course, it does not have an electric windscreen washer pump. Everything remains as it was.
Wiper system nozzle chromium-plates (twin-jet nozzle). Suitable for all Citroen 2CV starting from
year of construction 1961. Also suitable for many classical Peugeot (403). Bore for the nozzle must be 8-9mm.
Wiper system nozzles - upper part (with one water ejection nozzle)! Suitable for 2CV, Dyane, HY, DS
S (DS Installed to year of construction 1969!). M 7x1mm
Wiper system nozzles - lower part, from brass. With additional connection for a hose. Suitable for
Citroen DS, to year of construction 1969. In addition, this additional connection is very practical for Citroen DS, HY etc.. Mounting hole: 7,0mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Windscreen washer foot pump seal. This is the seal that is fitted under the foot pump (seal to the
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Windscreen washer foot pump. Suitable for Citroen 2CV up to year of construction 1970 (depending on
country of delivery). Citroen Dyane + Acadiane. Attention: The pump has only 1 line connection.
Disk washing water hand pump, reproduction, 5mm. This pump is mounted in the dashboard. In
addition, the pump is a reproduction of the first version, and can installed into a Citroen 2CV6 and partial in a Renault R4 .
Windscreen washer hand pump with hose. Looks like the original. This pump is mounted in the
dashboard. The pump corresponds to the original hand pump as it was mounted in the 2CV6 until the year of construction 1990. Or. No. AZ864-209A. This pump was also installed in the Citroen ID19 until the year of construction 1962 (DM564-9) and the Citroen HY. Please note: The pump has 3 connections: 1x inlet and 2x outlet. For the 2CV with the enclosed T-connector, please bridge 1x (see photo 2 in the shop).
Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Wiper arm from high-grade steel, for Citroen 2CV. The wiper arm is straight and not bent! The wiper
r mounting is twisted around 90°. The arm is for the old, rigid wiper blades. (16017 + 90987)
Wiper arm black paints, for Citroen 2CV. The wiper arm is straight and not bent! The wiper mounting
is twisted around 90°. The arm is for the old, rigid wiper blades. (16017 + 90987).
Wiper arm chromium-plates, for Citroen 2CV, final version for elastic wiper blades! Installed to
year of construction 1990. The wiper arms do not fit for rigid wiper blades!
Windshield wiper linkage retaining ring. For the securement of the wiper linkage at the wiper axle
Suitable for Citroen 2CV.
Headlight mounting clamp (lever) on the top of the headlamp housing. Suitable for Citroen 2CV6
2CV4, Citroen HY. Consisting of lever, spring, mounting plate.
Headlamp chromi-plated with H4 reflector, for Citroen 2CV + HY. Reproduction from India! Original
form, plastic case chrom-plated. Installed until 1990! Without bulbs.
Headlamp chrom-plated, with H4 reflector. Suitable for Citroen 2CV, HY. Original form, plastic case
e chrom-plated, like in the final years of construction installed. (up to year of construction 1990)! Original supplier Vaöeo, no reproduction. Without bulbs. Production is stopped by Valeo! We took over the final 1800 headlamps from Valeo.
VIDEO Headlamp trim ring (2 fittings), suitable for Citroen 2CV, to year of construction 1990, Citroen
HY. Material: Aluminum. As replacement for the original ones.
Headlight insert double-filament bulb (with parking light), reproduction. Suitable for Citroen 2CV
to about year of construction 1972. Wide headlight chrome ring. About 150mm diameter!
Headlight insert double-filament bulb (without parking light), reproduction. Suitable for Citroen
2CV, to about year of construction 1972. Wide headlight chrome ring. About 150mm diameter!
Double filament bulb headlight insert reproduction (made in Europe), for Citroën 2CV6, 2CV4, AK
Installed until 1990! Good quality. The headlight comes with an 'E' approval mark.
Reflector double-filament bulb reproduction, for Citroen 2CV6. Installed one until 1990! Exchange
please the chrome ring for the originals of your old headlamp!
Headlight insert angularly, for headlight casings from synthetic. Suitable for Citroen 2CV with
angular headlamp, starting from year of construction 08/1979. Double-filament bulb
Headlight insert angularly, for headlight casings made of metal. Suitable for Citroen 2CV with
angular headlamp, to year of construction 07/1979. Double-filament bulb
Headlamp casing round, grounding, from synthetic. Version Cibie. Suitable for Citroen 2CV + HY
Installed from 1972 to 1990.
- Suitable for this article
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
2611 Articles | Page 40 of 53
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
