Heating air fan in snail form. By the design a larger air orifice is possible. For conversion in
Citroen 2CV. Without built-in set. The suitable built-in set has the number 14505.
for Citroën 2CV 2CV4
2598 Articles | Page 26 of 52
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
Heating hose lined (with foam on the inside). Suitable for Citroen 2CV6, 2CV4 + AMI6. Own
reproduction. With aluminium core, making it much more durable! 500 mm long, 90 mm outer diameter, 15 mm foam.
Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the warm
air distributor in the engine compartment and the air duct at the windshield. The hose is isolate with foam material.
Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of
f painted sheet metal. Or. No. 5403748
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for both heater cables. Suitable for Citroen 2CV.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for one heater cable. Suitable for Citroen 2CV.
Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between
the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.
Heater cable long, for Citroen 2CV6. Mounted at the heater adjustment lever in the interior to the
heating exchanger. Installed one starting from 04/1972. Bowden cable about 1480mm long. Casing about 1250mm. The heater cable is individually shortenable.
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101
Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low
shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.
Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting
spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.
Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for
the roof and door linings.
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: velour light grey, with thin foam backing. Without wheel housing lining!
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: bordeaux
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: grey.
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: orange.
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: black
Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +
800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.
Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.
PDF FILE Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.
Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)
operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.
Rear window shelf from material (beige Raye 1666) in colors beige - brown, red streaked. (Original
Design from the seventies). Suitable for Citroen 2CV.
Rear window shelf from Velour material (Bleu Raye 1676), in colors light blue - dark-blue
(Original Design from the seventies). Suitable for Citroen 2CV.
Rear window shelf from Velour material (Marron Raye 1667) in colors beige - brown, dark red
streaked. (Original Design from the seventies). Suitable for Citroen 2CV
Rear window shelf from Velour material (Vert Raye), in colors lightgreen - darkgreen. (Original
Design from the seventies). Suitable for Citroen 2CV.
Rear shelf mounting rods. Suitable for Citroen 2CV. Consisting of: 1x curved rod on the rear seat
bench. 1x straight rod. 2x brackets for the roll-up roof mounting and rear shelf.
2598 Articles | Page 26 of 52
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
