Cover plate fur the accelerator box for the Choke, for oval carburetor 2CV6 (If the pump is missing
or is defective.) Made in Germany.
carburetor and carburetor gasket sets for Citroën 2CV Alle
All fuel-controlling spare parts from us, are not applicable for fuel with an ethanol content of more than 5%. The warranty is not valid if high ethanol content such as E10 or greater is being used. Damages like swelling, dissolving or decay are a sign of using too much ethanol. Unfortunately, the developers of modern fuel are considering the impact on our cherished properties ever less.
106 Articles | Page 1 of 3
Pin, for the connection throttle control cable to the oval carburetor. Suitable for Citroen 2CV6
Length: 18,0mm. Diameter: 4,93mm. Or. No. AM142-67
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Pressure spring suitable for the idle air control adjusting screw, for Solex carburetor. For the
following carburetors: 26CBI, 28CBI, 30CBI (AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
PDF FILE Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,5mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 2,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Throttle valve spring for the throttle valve shaft. Suitable for 2CV6 starting from year of
construction 1981. (oval carburetor). The spring is mounted at the exterior of the carburetor.
Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges, you can determine the
diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).
Spring for the Choke flap in the carburetor. (oval carburetor). Dimension: 0,5 x 4,5 x 20mm
Suitable for Citroen 2CV6.
Rubber seal between carburetor + air filter, 38mm connection. Suitable for Citroen 2CV with round
carburetor and many other classical French vehicles.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). By tears in the rubber
hose, the engine can pull wrong air!
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). Very , very good
reproduction of original manufacturer. The hose is made of the same material and not so wobbly as the reproduction hoses.
Rubber hose between carburetor + air filter, suitable for Citroen 2CV, AZAM, AMI6. Of round
carburetor on grey sheet metal air filter.
Rubber hose for Citroen 2CV4 + 2CV6, between carburetor + air filter (round carburetor). Not
suitable for oval carburetor!
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Idling (throttle stop) adjusting screw for Solex carburettors. Suitable for the following
carburettors: 26CBI, 28CBI, 30CBI(AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, starting from year of
construction 09/1972. For carburetor 26/35 CSIC + 26/35 SCIC.
Slow-running jet for oval carburetor. Suitable for 2CV6, Dyane, Ami8, to year of construction
09/1972. Nozzle measurement: 55. For carburetor 26/35 CSIC + 26/35 SCIC.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 28SCIC, 28 CIC, 34 PICS
Renault R4, R5, R6, R12 R18, Fuego for carburetor Solex 32 SEIA, 32 EISA4, 32 SEIMA. Peugeot 504, carburetor Solex 32/35 SEIEA.
Diaphragm accelerator pump 2CV, AMI, Dyane, GS. For carburetor Solex 34 PICS3, Solex 40 PCIS3, 40
PICS3. 16mm plate, 8mm follower.
Screws for the carburetor cap. Suitable for Citroen 2CV with oval carburetor. (6 fittings). The
screws correspond optically to the original screws.
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Vacuum diaphragm, pulldown, for the Choke (cold engine starting). Suitable for Citroen 2CV6. The
diaphragm is mounted at the carburetor above. Or. No.: 95568478
Carburetor sealing set (only seals), inclusive Seal under carburetor, for oval carburetor SOLEX
26/28/35 CSIC, SCIC. Suitable for Citroen 2CV starting from year of construction 1981, Dyane, AMI. Made in Germany.
Carburetor sealing set for Citroen 2CV starting from year of construction 1949. Engines with 375 +
425 cc capacity. Carburetor SOLEX 28IBC.
Carburetor sealing set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10.
106 Articles | Page 1 of 3
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
