Luggage compartment lid for Citroen 2CV, starting from year of construction 2/1970. Good
reproduction from the European Union.
luggage compartment lid, attachments, rear doors for Citroën 2CV Alle
66 Articles | Page 1 of 2
2CV, luggage compartmend lid for Citroen 2CV, starting from year of construction 2/1970. Original
Citroen, no reproduction.
2CV, Luggage compartment lid - lock fastener cover sheet. The sheet metal is mounted in the luggage
compartment lid and leads the lock fastener! Or.Nr. AZ844123. Made in Europe.
2CV, luggage compartment lid gasket kit completely (Made in Germany). Suitable for Citroen 2CV. The
seal has been made especially for us. The "rubber flag" is diagonally, therefore there is a better sealing. Consisting of: 3 seals, cut to length and mitred cut. Width of the rubbers: approx. 29mm (like original).
2CV, boot lid trim (3 parts, made from 8mm natural fleece). Felt light grey. The trim must be glued
in place. Made in Germany.
2CV, boot lid trim (3-piece, made from natural fleece). Black felt with a backing layer of
sound-deadening material. The trim must be glued in place. Made in Germany.
2CV, Luggage compartment lid, emblem "2CV6 Charleston". Original-faithful reproduction made of
metal. The emblem is self adhesive. Measurements: 35x240mm
2CV, Luggage compartment lid, emblem "2CV6 club". Original-faithful reproduction made of metal. The
emblem is self adhesive. Measurements: 35x175mm
2CV, Luggage compartment lid, emblem (signature) "2CV", from synthetic chromium-plates. Length
about 55mm, height of ca.21mm.
2CV, Luggage compartment lid, emblem (signature) "2CV4", from synthetic chromium-plates. Length
about 85mm, height of ca.25mm
2CV, Luggage compartment lid, emblem (signature) "2CV6", from synthetic chromium-plates. Length
about 85mm, height of ca.25mm
2CV, Luggage compartment hood. Emblem "2CV" swung, from 3mm high-grade steel. Made in Germany by
Franzose. The signature 16836 consists of: 1x "2" + 1x "CV". The emblems are fastened with 4x M3 nuts (our article number 20166).
2CV, Luggage compartment hood. Emblem "CITROEN" swung, from 3mm high-grade steel. Made in Germany
by Franzose. The signature is about 180mm long, and 65mm highly. The emblems are fastened with 2x M3 nuts (our article number 20166).
2CV, soft top hood cross panel (cross beam rear crosswise). That is the mounting for the hinge
strip of the luggage compartmend lid. Suitable for Citroen 2CV.
2CV, Roll roof lug, suitable on the left above at the windshield frame and on the right rear on the
rear end panel! For Citroen 2CV, Installed over all years of construction!
VIDEO 
2CV, Roll roof lug, suitable on the right above at the windshield frame and on the right left on
the rear end panel! For Citroen 2CV, Installed over all years of construction!
Signature label "C I T R O E N" for the chrome hinge strip of the luggage compartment lid (long
signature). Suitable for Citroen 2CV.
Signature label "C I T R O E N" for the chrome hinge strip of the luggage compartment lid (short
signature). Suitable for Citroen 2CV.
2CV, Conversion kit on large luggage compartment hood, suitable for Citroen 2CV. This conversion
kit was in former times an option.
ACDY, tail gate on the left, reproduction. Suitable for Citroen ACDY. The door is electrolytically
galvanized! Made in Europe.
ACDY, tail gate on the right, reproduction. Suitable for Citroen ACDY. The door is electrolytically
galvanized! Made in Europe.
ACDY, tail gate, emblem "ACADIANE " 2CV. Original-faithful reproduction made of metal. The emblem
is self adhesive. Measurements: 35x155mm
AK250, tail gate on the left, large, angular window (wide grooves). Reproduction. Suitable for
Citroen AK 250 (low van). The door is electrolytically galvanized! Made in Europe.
AK250, tail gate on the right, large, angular window (wide grooves). Reproduction. Suitable for
Citroen AK 250 (low van). The door is electrolytically galvanized! Made in Europe.
AK400, tail gate on the left, reproduction. Suitable for Citroen AK400. The door is
electrolytically galvanized! Made in Europe.
AK400, tail gate on the right, reproduction. Suitable for Citroen AK400. The door is
electrolytically galvanized! Made in Europe.
AMI6 pedal floor. It`s made according to original dimensions and adapted to fit all Citroën AMI6
body type. It is delivered in two separate pieces for easier installation into vehicle. Upper part has stamped reinforce ribs and on bottom part you can find two inside reinforcements with welded M7 nuts. On outside of bottom panel two reinforcing plates are spot welded. Made in Europe.
Label suitable for the guarantee, for Citroen 2CV, Dyane starting from 1977. The guarantee label is
appropriate on the inside of the luggage compartment lids.
Label suitable for the guarantee, for Citroen 2CV, Dyane, AMI until 1977. The guarantee label is on
the inside from the luggage compartment lid.
Label additional load for AK/AZU 250 to 1975. The set consists of individual letters! The
inscription was outside appropriate at the 2CV van!
AK250, rear door left (square window, narrow grooves)), reproduction. Suitable for Citroen AK250
(low box). The door is electrolytically galvanised! Made in Europe.
66 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
