Seal under carburetor lightly, seal between distance plate and carburetor. Suitable for Citroen
2CV6 with oval carburetor. Quality after production from Europe.
for Citroën 2CV Alle
3865 Articles | Page 75 of 78
Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citroen
2CV to year of construction 1981, with round carburetor. Inside diameter 34mm. Made in Germany
Carburettor base gasket, spacer plate between intake manifold and carburettor. Suitable for Citroen
2CV6 with oval carburettor. Made in Germany. Thickness: approx. 9.0 mm. This plate, made in Germany, is manufactured in the same way as the original plate, with many layers of sealing paper soaked in resin and pressed together. There are also many carburettor plates made of plastic on the market, but these do not achieve the same level of insulation.
Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citroen
2CV6 with oval carburetor. Reproduction. Thickness: about 9mm.
Seal under carburetor, distance plate. Installed in Citroen 2CV with 375 + 425cc with round
carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98
Latching pin, which is inserted from above into the medium seat slide. Suitable for Citroen 2CV. It
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement
10x14x27,5mm. Very good after production from the European Union.
Motor-gearbox screw connection: Short stud bolts (these are the lower stud bolts) between the motor
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
Motor-gearbox screw connection: long stud bolts (these are the upper stud bolts, as they also hold
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the left. Suitable for
Citroen 2CV. Made in Germany.
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the right. Suitable for
Citroen 2CV. Made in Germany.
Front axle cover plate on the left, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover plate on the right, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover sheet. (Cover at the steering gear, below the tie rod securement). Suitable for
Citroen 2CV. Or. No.: A44278A
Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable
for Citroen 2CV. Or.Nr.A44295
Front axle pipe - steering gear in the exchange. Suitable for Citroen 2CV4 + 2CV6. Top outdated
all bearings and pinions are accurately bedded in and measured. The steering worm and the gear rack are re-tooled with grease nipple. To lubricate thus at any time from the outside. 250 euros Old part deposit.
lifting jack like original. Suitable for Dyane, Acadyane, Mehari. Note: without crank. The crank is
to be received under the article number 20060.
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
White wall rings, 4 fittings. Suitable for Citroen 2CV. Note: The white wall rings can be mounted
only in combination with our rims chrome rings 16815!
Service manual volume 2, out + installation of parts. For Citroen 2CV4 + 2CV6. In addition, the
book is component of service manual 18200. Language German.
Tool 1677-T, for the nuts (6x9mm) the rocker arm and at the gearbox (Citroen 2CV). Clutch housing
(6x9mm) Citroen DS. Attention: The screws are extremely tight. Therefore, first hit the screw head with a hammer (setting impact) to loosen the screw in the thread!
Winter tire 135R15MS. Manufacturer Michelin. Suitable for Citroen 2CV. Also very well as
all-terrain tires for Citroen Mehari.
Winter tire mounts on a new rim, 135/15. Manufacturer Michelin. We use only our own
series-identical rims and no reproduction rims! Suitable for Citroen 2CV.
Wiper axle for Citroen 2CV4 + 2CV6. New part. Complete repair set, inclusive connector nut, rubber
seal etc., for 1 axle!! Improved version! Made one in European Union. Connector nut + disk are not chromium-plated, they are only silver!
Wiper axle 2CV4+6, without mounting material. (Nuts, sealing ring), reproduction. Suitable related
d accessory: 14154 sealing rubber, 14247 chrome cap, 14152 nut outside, 14157 nut inside, 14155 tie-clip for wiper axle.
Wiper axle for Citroen Dyane + Acadyane > 6/81. New part. Complete repair set, inclusive connector
nut, rubber seal etc., for 1 axle!! Improved version! Made one in European Union. Connector nut + disk are not chromium-plated, they are only silver! Attention: Since 06/1981 the Dyane has screwed-on wiper arms (i.e. they are not fitted with fine toothing!).
Wiper axle chrome ring, Citroen 2CV, HY. Is mounted over the sealing rubber of the wiper axle
Reproduction. Per piece.
Wiper arm made of stainless steel, for Citroen Dyane + Acadyane (until 06/1981). Attention: Since
06/1981, the Dyane has screwed-on wiper arms (i.e. they are not fitted with fine toothing!).
Wiper blade from polished high-grade steel. Suitable for Citroen 2CV, to year of construction 1990
The wiper blade is spring-loaded. Length: 240mm. We let these wiper blades manufacture particularly for 2CV, and they have the original length of only 240mm! Per piece.
Wiper blade elastic, 2 fittings, for Citroen 2CV. Original Valeo! (V.24) Wiper blade length
25,50cm. The wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings. Stuffing contents: 2 fittings!
3865 Articles | Page 75 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
