for Citroën 2CV Dyane
2023 Articles | Page 31 of 41
Wiper system nozzles - upper part (with one water ejection nozzle)! Suitable for 2CV, Dyane, HY, DS
S (DS Installed to year of construction 1969!). M 7x1mm
Wiper system nozzles - lower part, from brass. With additional connection for a hose. Suitable for
Citroen DS, to year of construction 1969. In addition, this additional connection is very practical for Citroen DS, HY etc.. Mounting hole: 7,0mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Windscreen washer foot pump seal. This is the seal that is fitted under the foot pump (seal to the
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Windscreen washer foot pump. Suitable for Citroen 2CV up to year of construction 1970 (depending on
country of delivery). Citroen Dyane + Acadiane. Attention: The pump has only 1 line connection.
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Disk washing water hand pump, reproduction, 5mm. This pump is mounted in the dashboard. In
addition, the pump is a reproduction of the first version, and can installed into a Citroen 2CV6 and partial in a Renault R4 .
Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Wiper arm black, suitable for Mehari, Dyane > 06/1981. Reproduction. Length 31cm (from centre axle
mounting on vehicle to centre axle wiper blade mounting)
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Sliding window guide (1 pair) down, Citroen Dyane + Acadyane. Reproduction. Made in European Union
Optically like original!
Hose air circulation for the disc brake in front. Suitable for bad copied, French air circulations
(not suitable for our number 13020 + 13021). Citroen 2CV. 35mm inside diameter, 250mm long.
Hose air circulation, for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Reproduction. Inside diameter: 38mm. Length: 250mm.
Hose air circulation for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Accurate reproduction from synthetic, as the original hoses. Inside diameter 40-42mm, length 235mm.
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Rear mud flaps (left + right) with Citroen logo. These mud flaps can be universally installed
(Citroen 2CV, Dyane, Mehari, DS, AMI, etc.). Dimensions approx.: 22 cm wide, 25 cm high. The mud flaps have different mounting holes. This allows the mounting height to be adjusted. The mud flaps are of good quality. The brackets for mounting must be made yourself! (There's always something).
Screw for the driving shaft to the drive shaft. Gearbox side Installed. Suitable for Citroen for
2CV to year of construction 1971. Or.Nr.: AM451-94A
Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citroen
2CV, Dyane, Ami, Mehari.
Screw cross lens head (3,9x16) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for synthetic bases. Per piece.
Cross lens head screw (M4x10) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
Cross lens head screw (M4x12) from high-grade steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
Citroen 2CV6 + 2CV4, to year of construction 1981.
2023 Articles | Page 31 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
