for Citroën 2CV6

piston ring presenting pliers for diameter 40-100.

Piston rings for Citroen 2CV6 starting from year of construction 1976. (1 set for 2 pistons)

Reproduction. Measurements: 1,75 + 2.0 + 3,5mm. Or.Nr.: 5503402.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €

Piston rings, for 2 pistons, original, 602cc engine as from 1976. Measure: 1,75 + 2,0 + 3,5mm. 74mm

m bore. Improved version with 2 steel rings! The benefits are: Higher running performance, resistant, improves adaptation to the liner, less friction, reduction of the oil consumption!

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €

Piston rings for Citroen 2CV6 to year of construction 1976. (1 set for 2 pistons). Bore 74mm. Label

manufacturer! Measurements: 1,5 + 2.0 + 4,0mm

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €

Piston ring set for Citroen Visa 652. 1 set for 2 pistons. Measurements: 77 x 1.5 + 2 + 3 mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €

Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).

piston ring compressor from 60 up to 125mm, workshop quality (HAZET)

Condenser connection lug (flat plug), for Citroen 2CV 4+6. (connection condenser to the ignition

coil).

Condenser Citroen 2CV 4+6, 12 Volt. Label manufacturer! Made in France.

• Suitable for this article
• 
  Ignition contact for Citroen 2CV 4+6, from manufactor Valeo/Angli/BERU!
  7,53 €

Isolatingboard made of plastic, for condenser Citroen 2cv.

• Suitable for this article

Console to fix the hand brake on chassis 15000 (for drum brake). Made in Germany.

Contact and condenser, for Citroën 2CV6/2CV4, 12-volt electrical system. From original equipment

manufacturers Valeo, BERU and ANGLI.

Ignition contact for Citroen 2CV 4+6, from manufactor Valeo/Angli/BERU!

• Suitable for this article
• 
  Condenser Citroen 2CV 4+6, 12 Volt. Label manufacturer! Made in France.
  9,18 €

Isolatingboard made of plastic for contacts Citroen 2cv.

• Suitable for this article

Reproduction ignition contacts, for Citroën 2CV 4+6, 12 volts. It's best to use OEM-quality

ignition contacts!

• Suitable for this article

Contact housing screening plate, mounts before the fleeing weights. For Citroen 2CV 4+6.

Contact housing Citroen 2CV, 12 V. Completely with contact + condenser. Reproduction

Contact housing seal cap for Citroen 2CV4+6.

Ignition contact case, empty, for Citroen 2cv.

• Suitable for this article

Contact housing locking cap for Citroen 2CV4+6. reproduction, galvanizes.

Ignition contact housing: Screw for the cap. Suitable for Citroen 2CV. Per piece

Locknut M12x1. E.g. for the clutch cable for Citroen 2CV. Also suitable for brake light switch

14127.

Control lamp blue for Citroen 2CV, HY, DS, reproduction of the original. The suitable bulb has our

number 14070.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control light blue, version Jaeger. This very good reproduction of the Jeager light are installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control lamp red for Citroen 2CV, HY, DS, with chrome border, reproduction of the original. The

suitable bulb has our number 14070.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control light Citroen 2CV, HY, DS. Like original, color black with 4 differently colored caps

(green, blue, red, orange)

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control light Citroen 2CV, HY, DS. Like original, color: chromium-plated, with 4 differently

y colored metal caps (green, blue, red, orange)

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control lamp green for Citroen 2CV, HY, DS, reproduction of the original. The suitable bulb has our

number 14070.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control light green, version "Jaeger". This very good reproduction of the Jeager light is installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light green, turn light indicator to use with a tow trailer coupling. 12 V.

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €
• 
  Light bulb 12V, 2 Watt for pilot lamp (articles 50056-50059 ), socket BA7's
  1,19 €

Warning light with polished aluminium lid, blue

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, yellow-orange

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, green

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, red

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Control light orange, version "Jaeger". This very good reproduction of the Jeager light is

installed partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control lamp red for Citroen 2CV, HY, DS, reproduction of the original. The suitable bulb has our

number 14070.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €
• 
  ball bulb 2 Watt 6 Volt, base Ba9s / side flasher-parking lights
  1,81 €

Control light red, version "Jaeger". This very good reproduction of the Jeager light is installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Fender sealing trim in black, universal fitting, by meters. Customer cut, return not possible!

Wing protection (1 pair) with solenoid! Indispensably for workshop jobs!

Castle nut, M14X1,5. Low version

Elbow seal exhaust 2CV6, improved version. The seal is made of most significant seal material

Preparation of Reinz Germany.

• Suitable for this article
• 
  Elbow seal inlet 2CV6, improved version. The seal is made of most significant
  4,42 €
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc

engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany

Manifold seal exhaust, for 602cc engine. 2CV6. Or.Nr. 96177786. Original equipment manufacturer

Glaser"

• Suitable for this article
• 
  Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787
  1,54 €
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material

Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787

• Suitable for this article
• 
  Elbow seal exhaust 2CV6, improved version. The seal is made of most significant
  7,33 €
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm

Original equipment manufacturer "Glaser"

• Suitable for this article
• 
  Manifold seal exhaust, for 602cc engine. 2CV6. Or.Nr. 96177786. Original
  1,54 €
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Manifold seal inlet, for Citroen 2CV AZAM. Inside diameter: 34mm. Diameter securement: 8,0mm

Center to center securement: 55mm. Or.Nr.: AM1412C

Inlet + exhaust manifold for 2CV6 with round carburetor, Installed from 04/1972 to 06/1980.

Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single

carburetor (round carburetor). Also suitable for Peugeot + Renault.

Copper seal type A, (full copper). 16x22x1,5mm.

Copper paste 100gr.